CPC1963G

CPC1963 AC Power Switch Parameter Blocking Voltage Load Current On State Voltage Drop Ratings 600 500 1.4 Units VP mArms Vrms (at IL = 500mA) Description The CPC1963 is an AC Solid State Switch using optical coupling with dual power SCR outputs to produce an alternative to optocoupler and Triac circuits. The CPC1963 switches are robust enough to provide a blocking voltage of up to 600VP. In addition, tightly controlled zero cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750Vrms of isolation and noise immunity between control and load circuits. As a result, the CPC1963 is well suited for industrial environments where electromagnetic interference could disrupt the operation of electromechanical relays. Features • • • • • • • • • • • Load Current up to 0.5Arms 600VP Blocking Voltage 5mA Sensitivity Zero-Crossing Detection DC Control, AC Output Optically Isolated TTL and CMOS Compatible Low EMI and RFI Generation High Noise Immunity Machine Insertable, Wave Solderable Flammability classification rating of V-0 Approvals • UL 508 Recognized Component: File #: E69938 • CSA Certified Component: Certificate # 1172007 Applications • • • • • • • • • • Programmable Control Process Control Power Control Panels Remote Switching Gas Pump Electronics Contactors Large Relays Solenoids Motors Heaters Ordering Information Part Number CPC1963G CPC1963GS CPC1963GSTR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1000/Reel) Pin Configuration 1 + LED – LED 2 3 ZC 6 5 4 AC Load AC Load Pb RoHS 2002/95/EC e3 www.clare.com 1 DS-CPC1963-R04 CPC1963 Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Package Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 2 Ratings Units 600 VP 5 V 50 mA 1 A 150 mW 800 mW 3750 Vrms -40 to +85 °C -40 to +125 °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 1.33 mW/˚C Derate Linearly 6.67 mW/˚C Electrical absolute maximum ratings are at 25°C Electrical Characteristics Parameter Output Characteristics @ 25°C Operating Voltage Range Load Current, Continuous Off State Leakage Current On-State Voltage Drop Critical Rate of Rise 3 Switching Speeds Turn-on Turn-off Zero-Cross Turn-On Voltage 1 Operating Frequency Load Power Factor for Guaranteed Turn-On 2 Input Characteristics @ 25°C Input Control Current 4 Input Drop-out Voltage Input Voltage Drop Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance 1 Conditions VT VL=120Vrms V = 600V IL=500 mArms - Symbol IL ILEAK VON dV/dt tON tOFF PF IF VF IR CI/O Min 20 0.005 1000 20 0.25 0.8 0.9 - Typ 2 1 0.23 1.2 3 Max 260 0.5 1 1.4 0.5 0.5 10 500 5 1.4 10 - Units Vrms Arms mA Vrms V/µs IF=5 mA 1st half cycle Subsequent half cycle IF=5mA VR=5V - cycles V Hz mA V V µA pF Zero Cross 1st half cycle @