CPC1965Y

CPC1965Y AC Solid State Relay Parameter AC Operating Voltage Load Current On State Voltage Drop Rating 260 1 1.6 Units Vrms Arms Vrms (at IL = 1Arms) Features • Load Current up to 1Arms • 600VP Blocking Voltage • 5mA Sensitivity • Zero-Crossing Detection • DC Control, AC Output • Optically Isolated • TTL and CMOS Compatible • Low EMI and RFI Generation • High Noise Immunity • Machine Insertable, Wave Solderable • Flammability classification rating of V-0 Description The CPC1965Y is an AC Solid State Switch using patented waveguide coupling with dual power SCR outputs to produce an alternative to optocoupler and Triac circuits. The switches are robust enough to provide a blocking voltage of up to 600VP . In addition, tightly controlled zero-cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750Vrms of isolation and noise immunity between control and load circuits. As a result, the CPC1965Y is well suited for industrial environments where electromagnetic interference could disrupt the operation of electromechanical relays. Approvals • UL Recognized Component: File # E69938 • CSA Certified Component: Certificate # 1172007 Applications • Programmable Control • Process Control • Power Control Panels • Remote Switching • Gas Pump Electronics • Contactors • Large Relays • Solenoids • Motors • Heaters Ordering Information Part # CPC1965Y Description 4-Lead, 8-Pin SIP (25/Tube) Pin Configuration ZC 1 2 – LED + LED 6 8 AC Load AC Load Pb RoHS 2002/95/EC e3 www.clare.com 1 DS-CPC1965Y-R04 CPC1965Y Absolute Maximum Ratings (@ 25˚ C) Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 PD , Total Package Dissipation 2 Isolation Voltage Input to Output Operational Temperature Storage Temperature 1 Derate Linearly 1.33 mW/ºC 2 Derate Linearly 16.6 mW/ºC Ratings Units 600 VP 5 V 100 mA 1 A 150 mW 1600 mW 3750 Vrms -40 to +85 °C -40 to +125 °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristcs Parameters Output Characteristics @ 25°C Operating Voltage Range Load Current, Continuous Non-Repetitive Single Cycle Surge Current Off State Leakage Current On-State Voltage Drop Critical Rate of Rise 3 Switching Speeds Turn-on Turn-off Zero-Cross Turn-On Voltage Operating Frequency 1 Load Power Factor for Guaranteed Turn-On 2 Input Characteristics @ 25°C Input Control Current 4 Input Voltage Drop Input Drop-out Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance 1 Conditions VL VL=120-260Vrms VL=600VP IL=1Arms - Symbol IL ITSM ILEAK dV/dt tON tOFF PF IF VF IR CI/O Min 20 0.005 1000 20 0.25 0.9 0.8 - Typ 2 1 0.8 1.2 3 Max 260 1.0 10 1 1.6 0.5 0.5 10 400 5 1.4 10 - Units Vrms Arms A mA Vrms V/µs IF=5 mA 1st half cycle Subsequent half cycle IF=5mA VR=5V - cycles V V Hz mA V V µA pF Zero Cross 1st half cycle @