CPC3730C

N-Channel Depletion-Mode Vertical DMOS FETs BVDSX/ BVDGX 350V RDS(ON) (max) 30Ω IDSS (min) 140mA Package SOT-89 CPC3730C Description • Depletion mode device offers low RDS(ON) at cold temperatures • Low on resistance 30 ohms max. at 25ºC • High input impedance • High breakdown voltage 350V • Low VGS(off) voltage -1.6 to -3.9V • Small package size SOT-89 Features The CPC3730C is an N-channel depletion mode field effect transistor (FET) that utilizes Clare’s proprietary third generation vertical DMOS process. Third generation process realizes world class, high voltage MOSFET performance in an economical silicon gate process. Our vertical DMOS process yields a robust device for high power applications with high input impedance. The CPC3730C is a highly reliable FET device that has been used extensively in Clare’s solid state relays for industrial and telecommunications applications. This device excels in power applications requiring low drain-source resistance, particularly in cold environments such as automotive ignition modules. The CPC3730C offers a low 30 ohm maximum on-state resistance at 25ºC. • • • • • • Applications Ignition modules Normally-on switches Solid state relays Converters Telecommunications Power supply The CPC3730C has a minimum breakdown voltage of 350V and is available in an SOT-89 package. As with all MOS devices, the FET structure prevents thermal runaway and thermal-induced secondary breakdown. Ordering Information Package Pinout D G D S Part # CPC3730C CPC3730CTR Description SOT-89 (100/Tube) SOT-89 (2000/Reel) (SOT-89) Switching Waveform 0V INPUT INPUT Test Circuit 90% 90% PULSE PULSE R GENERATOGENERATOR VDD VDD 0V RL RL OUTPUT OUTPUT -10V 10% -10V 10% t(ON) td(ON) t(ON) tr td(ON) 10% 90% tr t(OFF) td(OFF) t(OFF) tF td(OFF) 10% 90% tF 10% 90% Rgen Rgen D.U.T. INPUT INPUT D.U.T. VDD OUTPUT OUTPUT VDD 10% 90% 0V 0V DS-CPC3730C-R00B.2 www.clare.com 1 CPC3730C Absolute Maximum Ratings (@ 25˚C) Parameter Drain-to-Source Voltage Gate-to-Source Voltage Total Package Dissipation Operational Temperature Storage Temperature 1 Mounted on FR4 board 1"x1"x0.062" Ratings 350 ±20 1.61 -55 to +125 -55 to +125 Units V V W ºC ºC Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics Parameter Drain-to-Source Breakdown Voltage Gate-to-Source Off Voltage Change in VGS(off) with Temperatures Gate Body Leakage Current Drain-to-Source Leakage Current Saturated Drain-to-Source Current Static Drain-to-Source On-State Resistance Change in RDS(on) with Temperatures Forward Transconductance Input Capacitance Common Source Output Capacitance Reverse Transfer Capacitance Turn-ON Delay Time Rise Time Turn-OFF Delay Time Fall time Source-Drain Diode Voltage Drop Symbol BVDSX VGS(off) dVGS(off)/dT IGSS ID(off) IDSS RDS(on) dRDS(on)/dT GFS CISS COSS CRSS td(on) tr td(off) tf VSD Conditions VGS= -5V, ID=100µA IDS= 15V, ID=1mA VDS= 15V, ID=1mA VGS=±20V, VDS=0V VGS= -5V, VDS=Max Rating VGS= -5V, VDS=0.8 Max Rating TA=125ºC VGS= 0V, VDS=15V VGS= 0V, ID=140mA VGS= 0V, ID=140mA ID= 100mA, VDS = 10V VGS= -5V VDS= 25V f= 1Mhz VDD= 25V ID= 150mA VGS= 0V to -10V RGEN= 50Ω VGS= -5V, ISD= 150mA Min 350 -1.6 140mA 150 Typ 100 20 5 20 10 20 50 0.6 Max -3.9 4.5 100 1 1 30 1.1 200 100 80 1.8 Units V V mV/ºC nA µA mA mA Ω %/ºC m pF Ω - ns V Thermal Characteristics Package SOT-89 ID (continuous) 140mA ID (pulsed) 600mA Power Dissipation @TA=25ºC 1.6W1 θjcºC/W 15 IDR 140mA IDRM 600mA 1 Mounted on FR4 board 1"x1"x0.062" 2 www.clare.com R00B.2 CPC3730C PERFORMANCE DATA* CPC3730C Output Characteristics VGS=0.0 150.0 135.0 120.0 105.0 90.0 75.0 60.0 45.0 30.0 15.0 0 140.0 120.0 CPC3730C Transfer Characteristics VDS=5V 42.0 36.0 30.0 24.0 18.0 12.0 6.0 CPC3730C VGS(off) & Ron Vs. Temperature VDS=10V ID=1mA VGS=0V ID=80mA VGS(off) 2.8 2.4 2.0 Ron ID (mA) ID (mA) VGS=-1.0 100.0 80.0 60.0 40.0 20.0 6 -VGS(off)(V) 1.6 1.2 0.8 0.4 VGS=-1.5 VGS=-2.0 0 1 2 3 VDS (V) 4 5 0 -3.0 -2.5 -2.0 VGS (V) -1.5 -1.0 0 -40 0 40 80 120 0 1.8 Power Dissipation (W) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 CPC3730C Power Dissipation vs. Ambient Temperature CPC3730C Maximum Rated Safe Operating Area at 25ºC 1.0 0.1 ID (A) 0.001 0.0001 0 20 40 60 80 100 120 140 50 45 40 35 30 25 20 15 10 5 0 CPC3730C On Resistance vs. Drain Current 0 10 VDS (V) 100 1000 0.02 0.06 0.1 0.14 0.18 0.000 0.04 0.08 0.12 0.16 0.2 ID (A) 160 140 120 C (pf) 100 80 60 40 20 0 CPC3730C Capacitance vs. Drain Source Voltage VGS = -5V VISS V0SS VRSS 0 10 20 VDS (V) 30 40 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R00B.2 www.clare.com 3 Manufacturing Information Soldering Recommended soldering processes are limited to 220ºC component body temperature for 10 seconds. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. MECHANICAL DIMENSIONS 4.394 - 4.597 (0.173 - 0.181) 1.626 - 1.829 (0.064 - 0.072) R 0.254 (R 0.010) 1.397 - 1.600 (0.055 - 0.063) 3.937 - 4.242 (0.155 - 0.167) 2.286 ± 2.591 (0.090 ± 0.102) 0.889 - 1.194 (0.035 - 0.047) 0.356 - 0.483 (0.014 - 0.019) 0.432 - 0.559 (0.017 - 0.022) 1.422 - 1.575 (0.056 - 0.062) 2.921 - 3.073 (0.115 - 0.121) 0.356 - 0.432 (0.014 - 0.017) Tape and Reel Information Top Cover Tape Dimensions: mm (inches) For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC3730C-R00B.2 ©Copyright 2005, Clare, Inc. All rights reserved. Printed in USA. 6/8/05