IAA170PTR

IAA170P Integrated Circuits Load Voltage Load Current Max RON IAA170P 350 100 50 Units V mA Ω Description The IAA170P multifunction switch combines 350V, 100mA, 50Ω relay(s) and optocoupler(s) into a single package. Various combinations are available depending on the part number. This switch provides an ideal way to consolidate functionality into a single package. Features • Three Functions in One Package • Small 16 Pin SOIC Package (PCMCIA Compatible) • Bi-Directional Current Sensing • Bi-Directional Current Switching • Replaces up to Three or Four Components • 3750VRMS Input/Output Isolation • FCC Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable Approvals • Tape & Reel Versions Available • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-12 • VDE Compatible • BSI Certified: • BS EN 60950:1992 (BS7002:1992) Certificate #:7969 • BS EN 41003:1993 Certificate #:7969 Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Ordering Information Part # IAA170P IAA170PTR Description 16 Pin SOIC (50/Tube) 16 Pin SOIC (1000/Reel) Pin Configuration IAA170P Pinout (N/C) 1 2 3 4 5 6 7 (N/C) 8 16 15 (Form A) CONTROL Switching Characteristics of Normally Closed (Form B) Devices 10ms 14 13 12 (Form A) 11 10 9 90% + +10% TOFF TON + 90% Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL 1. (N/C) 2. + LED - Form A Relay #1 3. – LED - Form A Relay #1 4. + LED - Form A Relay #2 5. – LED - Form A Relay #2 6. Emitter - Phototransistor 7. Collector - Phototransistor 8. (N/C) 9. LED - Phototransistor +/– 10. LED - Phototransistor –/+ 11. Output - Form A Relay #2 12. Common Source Relay #2 13. Output - Form A Relay #2 14. Output - Form A Relay #1 15. Common Source Relay #1 16. Output - Form A Relay #1 + 90% LOAD 10% + TON 10%+ TOFF DS-IAA170P-R1 www.clare.com 1 IAA170P Absolute Maximum Ratings (@ 25˚ C) Parameter Total Package Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature (10 Seconds Max.) 1 Min 3750 -40 -40 - Typ Max Units 11 +85 +125 +220 W VRMS °C °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Above 25˚ derate linerity 1.67mw/˚C Electrical Characteristics Parameter Relay Portion Output Characteristics @ 25°C Load Voltage (Peak) Load Current (Continuous) Peak Load Current On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Relay Portion Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Detector Portion Output Characteristics @ 25°C Phototransistor Blocking Voltage Phototransistor Dark Current Saturation Voltage Current Transfer Ratio Detector Portion Input Characteristics @ 25°C Input Control Current Input Voltage Drop Input Current (Detector must be off) Input to Output Capacitance Input to Output Isolation IC=2mA,VCE=0.5V IF=5mA IC=1µA, VCE=5V VL=50V, f=1MHz IF ICEO CI/O VI/O 6 0.9 5 3750 2 1.2 25 3 1.4 mA V µA pF VRMS IC=10µA VCE=5V, IF=0mA IC=2mA, IF=16mA IF=6mA, VCE=0.5V BVCEO ICEO VSAT CTR 20 33 50 50 0.3 500 0.5 V nA V % IL=100mA IL=1mA IF=5mA VR=5V IF IF VF VR IR 5 0.4 0.9 1.2 50 1.4 5 10 mA mA V V µA 10ms IL=100mA VL=350V; TJ=25°C IF=5mA, VL=10V IF=5mA, VL=10V VL=50V, f=1MHz VL IL ILPK RON ILEAK TON TOFF 25 350 100 350 50 1 5 5 V mA mA Ω µA ms ms pF Conditions Symbol Min Typ Max Units 2 www.clare.com Rev. 1 IAA170P PERFORMANCE DATA* 35 30 Device Count (N) IAA170P Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC IAA170P Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) 25 20 15 10 5 0 25 20 15 10 5 0 29.09 29.86 30.63 31.40 32.16 32.93 33.70 On-Resistance (Ω) IAA170P Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Device Count (N) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) Device Count (N) 424.0 429.3 434.5 439.7 444.9 450.1 455.4 Blocking Voltage (V) IAA170P Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) 25 20 15 10 5 0 0.44 0.50 0.56 0.62 0.69 0.75 0.81 LED Current (mA) 25 20 15 10 5 0 IAA170P Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) 25 20 15 10 5 0 0.44 0.50 0.56 0.62 0.69 0.75 0.81 IAA170P Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) Device Count (N) Device Count (N) Device Count (N) 0.67 0.75 0.83 0.91 0.99 1.06 1.14 LED Current (mA) Turn-On (ms) IAA170P Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 100mADC) 25 Load Current (mA) 20 15 10 5 0 0.11 0.14 0.17 0.19 0.22 0.25 0.28 Turn-Off (ms) 160 140 Device Count (N) 120 100 80 60 40 20 0 IAA170P Typical Load Current vs. Temperature 0.016 0.014 Leakage (µA) 0.012 0.010 0.008 0.006 0.004 0.002 0 -40 -20 0 20 40 60 80 100 120 -40 IAA170P Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 10mA 5mA 2mA -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) IAA170P Typical Blocking Voltage vs. Temperature 455 Blocking Voltage (VRMS) 450 Turn-On (ms) 445 440 435 430 425 420 -40 -20 0 20 40 60 80 100 Temperature (°C) IAA170P Typical Turn-On vs. Temperature (Load Current = 100mADC) 1.80 1.60 1.40 1.20 1.00 0.80 0.60 0.40 0.20 0 -40 -20 0 20 40 60 80 100 120 Temperature (°C) 10mA 20mA Turn-Off (ms) 5mA 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 -40 IAA170P Typical Turn-Off vs. Temperature (Load Current = 120mADC) -20 0 20 40 60 80 100 120 Temperature (°C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 1 www.clare.com 3 IAA170P PERFORMANCE DATA* IAA170P Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (°C) IAA170P Typical Turn-On vs. LED Forward Current (Load Current = 100mADC) 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) IAA170P Typical Turn-Off vs. LED Forward Current (Load Current = 120mADC) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 50mA 30mA 20mA 10mA 5mA Turn-On (ms) 70 60 On-Resistance (Ω) IAA170P Typical On-Resistance vs. Temperature (Load Current = 100mADC; IF = 5mADC) IAA170P Typical IF for Switch Operation vs. Temperature (Load Current = 100mADC) 6.0 5.0 LED Current (mA) 4.0 3.0 2.0 1.0 0 -40 -20 0 20 40 60 80 100 120 LED Current (mA) 6.0 5.0 4.0 3.0 2.0 1.0 0 -40 Turn-Off (ms) IAA170P Typical IF for Switch Dropout vs. Temperature (Load Current = 100mADC) 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 120 Temperature (°C) -20 0 20 40 60 80 100 120 Temperature (°C) Temperature (°C) 100 80 60 40 20 0 -20 -40 -60 -80 -100 IAA170P Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC IAA170P Energy Rating Curve 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 10µs 100µs 1ms 10ms 100ms Time Normalized CTR (%) 1s 10s 100s IAA170P Typical Normalized CTR vs Forward Current (VCE = 0.5V) 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 0 2 4 6 8 10 12 14 16 18 20 IF (mA) Load Current (mA) -4 -3 -2 -1 0 1 2 3 4 Load Voltage (V) IAA170P Typical Normalized CTR vs. Temperature (VCE = 0.5V) 8 Load Current (A) IC (mA) -40 -20 0 20 40 60 IAA170P Typical Collector Current vs Forward Current (VCE = 0.5V) 12 10 8 6 4 2 0 0 2 4 6 8 10 12 14 16 18 20 Normalized CTR (%) 7 6 5 4 3 2 1 0 1mA 2mA 5mA 10mA 15mA 20mA 80 100 120 Temperature (°C) IF (mA) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 1 IAA170P Mechanical Dimensions 16 Pin SOIC (“P” Suffix) 7.493 ± .051 (.295 ± .002) 7.493 ± .127 (.295 ± .005) .254 (.010) 10.160 ± .051 (.400 ± .002) 1.270 TYP. (.050) PC Board Pattern (Top View) 1.270 (.050) 10.363 ± .127 (.408 ± .005) 1.981 TYP. (.078) 2.108 MAX. (.083) 1.016 (.040) 9.728 ± .051 (.383 ± .002) 1.193 (.047) .787 (.031) .406 TYP. (.016) 8.890 TYP. (.350) Tape and Reel Packaging for 16 Pin SOIC Package 330.2 DIA. (13.00) Top Cover Tape Thickness .102 MAX. (.004) 12.090 (.476) 3.175 (.125) 6.731 MAX. (.265) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) 1.753 ± .102 (.069 ± .004) .406 MAX. (.016) 7.493 ± .102 (.295 ± .004) 1 16 16.002 ± .305 (.630 ± .012) 10.693 ± .025 (.421 ± .001) Embossed Carrier Top Cover Tape .050R TYP. 11.989 ± .102 (.472 ± .004) User Direction of Feed 10.897 ± .025 (.429 ± .001) 1.549 ± .102 (.061 ± .004) Embossment Dimensions mm (inches) Rev. 1 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA/PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-IAA170P-R1 ©Copyright 2000, Clare, Inc. All rights reserved. Printed in USA. 2/23/01