LCA127LSTR

LCA127L SINGLE POLE OptoMOS Relay Load Voltage Load Current Max RON LCA127L 250 200 10 Units V mA Ω Description LCA127L is a 250V, 200mA, 10W 1-Form-A relay. It features low on-resistance. Features • Small 6 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Current Limiting, Surface Mount and Tape & Reel Versions Available Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified: • BS EN 60950:1992 (BS7002:1992) Certificate #:7344 • BS EN 41003:1993 Certificate #:7344 Ordering Information Part # LCA127L LCA127LS LCA127LSTR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration LCA127/L127L Pinout AC/DC Configuration 1 2 3 6 5 4 LCA127/LCA127L Pinout DC Only Configuration 1 2 3 6 5 4 + Control – Control Do Not Use Load Do Not Use Load + Control – Control Do Not Use + Load – Load Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ +90% TON 10%+ TOFF DS-LCA127L-R2 www.clare.com 1 LCA127L Absolute Maximum Ratings (@ 25o C) Parameter Min Typ Max Units 3 1501 50 1 5 8002 mW mA A V mW pF Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Capacitance Input to Output Isolation Voltage Input to Output 3750 Operational Temperature -40 Storage Temperature -40 Soldering Temperature DIP Package Flatpack/Surface Mount Pkg (10 Seconds Max.) 1 2 Absolute Maximum Ratings are stress ratings. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. VRMS °C +85 +125 °C +260 °C +220 °C Derate Linearly 1.33 mw/oC Derate Linearly 6.67 mw/oC Electrical Characteristics PARAMETER Output Characteristics @ 25°C Load Voltage (Peak) Load Current* (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Load Current Limiting Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Input to Output Capacitance Input to Output Isolation CONDITIONS 10ms IL=200mA IL=200mA VL=250V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz IL= 200mA IF= 5mA VR=5V SYMBOL VL IL IL ILPK RON RON ILEAK TON TOFF COUT ICL IF IF VF VR IR CI/O VI/O MIN 190 5 0.4 0.9 3750 TYP 13 5 50 235 0.7 1.2 3 MAX 250 170 250 15 6 1 5 5 280 50 1.4 5 10 UNITS V mA mA mA Ω Ω µA ms ms pF mA mA V V µA pF VRMS *NOTE: If both poles operate simultaneously load current must be derated so as not to exceed the package power dissipation value. 2 www.clare.com Rev. 9 LCA127L Performance Data 35 30 Device Count (N) LCA127L Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC 35 30 Device Count (N) 25 20 15 10 LCA127L Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC; IF = 5mADC) LCA127L Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) 35 30 Device Count (N) 25 20 15 10 5 0 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 5 0 11.25 11.75 12.25 12.75 13.25 13.75 On-Resistance (Ω) 262.5 267.5 272.5 277.5 282.5 287.5 Blocking Voltage (V) LCA127L Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC) 25 20 15 10 5 0 0.45 0.63 0.81 0.99 1.17 1.35 1.53 LED Current (mA) 25 20 15 10 5 0 LCA127L Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC) 25 20 15 10 LCA127L Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC; IF = 5mADC) Device Count (N) Device Count (N) Device Count (N) 5 0 0.45 0.63 0.81 0.99 1.17 1.35 1.53 0.33 0.55 0.77 0.99 1.21 1.43 LED Current (mA) Turn-On (ms) 25 20 15 10 LCA127L Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 170mADC; IF = 5mADC) Load Current (mA) LCA127L Typical Load Current vs. Temperature 350 300 Leakage (µA) 250 200 150 100 50 0 0.018 0.016 0.014 0.012 0.01 0.008 0.006 0.004 0.002 0 -40 -20 0 20 40 60 80 100 120 -40 LCA127L Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Device Count (N) 5 0 0.05 0.08 0.11 0.14 0.17 0.20 Turn-Off (ms) 20mA 10mA 5mA -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) LCA127L Typical Blocking Voltage vs. Temperature 350 Blocking Voltage (VRMS) 300 Turn-On (ms) 250 200 150 100 50 0 -40 -20 0 20 40 60 80 100 Temperature (°C) 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 LCA127L Typical Turn-On vs. Temperature (Load Current = 170mADC) 0.180 0.160 0.140 Turn-Off (ms) 0.120 0.100 0.080 0.060 0.040 0.020 0 -40 LCA127L Typical Turn-Off vs. Temperature (Load Current = 170mADC) 5mA 20mA 10mA -20 0 20 40 60 80 100 5mA -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 2 www.clare.com 3 LCA127L Performance Data LCA127L Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 Turn-On (ms) 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (°C) LCA127L Typical Turn-On vs. LED Forward Current (Load Current = 170mADC) 0.700 0.600 Turn-Off (ms) 0.500 0.400 0.300 0.200 0.100 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) LCA127L Typical Turn-Off vs. LED Forward Current Load Current = 170mADC) 0.140 0.120 0.100 0.080 0.060 0.040 0.020 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) 50mA 30mA 20mA 10mA 5mA 60.000 On-Resistance (Ω) LCA127L Typical On-Resistance vs. Temperature (Load Current = 170mADC; IF = 5mADC) Operate Current (mA) LCA127L Typical IF for Switch Operation vs. Temperature (Load Current = 170mADC) 2.500 2.000 1.500 1.000 0.500 0 Operate Current (mA) LCA127L Typical IF for Switch Dropout vs. Temperature (Load Current = 170mADC) 2.500 2.000 1.500 1.000 0.500 0 50.000 40.000 30.000 20.000 10.000 0 -40 -20 0 20 40 60 80 100 Temperature (°C) -40 -20 0 20 40 60 80 100 -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) 200 150 Load Current (mA) LCA127L Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC LCA127L Energy Rating Curve 1.2 1.0 Load Current (A) Current (mA) 0.8 0.6 0.4 0.2 0 10µs 100µs 1ms 10ms 100ms Time 300.00 250.00 200.00 150.00 100.00 LCA127L Typical Current Limiting vs. Temperature IF = 5mADC 100 50 0 -50 -100 -150 -200 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 50.00 0 1s 10s 100s -40 -20 0 20 40 60 80 100 Temperature (°C) Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 2 LCA127L Mechanical Dimensions 6 Pin DIP Through Hole (Standard) 7.620 ± .254 (.300 ± .010) 3.302 (.130) 6.350 ± .127 (.250 ± .005) 9.144 ± .508 (.360 ± .020) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) PC Board Pattern (Top View) 6-.800 DIA. (6-.031 DIA.) 9.144 (.360) 6.350 ± .127 (.250 ± .005) 2.540 ± .127 (.100 ± .005) 7.620 ± .127 (.300 ± .005) 7.239 TYP. (.285) .457 ± .076 (.018 ± .003) 5.080 ± .127 (.200 ± .005) 6 Pin DIP Surface Mount (“S” Suffix) 7.620 ± .254 (.300 ± .010) 4.445 ± .127 (.175 ± .005) 3.302 (.130) .635 TYP. (.025) .254 TYP. (.010) 6.350 ± .127 (.250 ± .005) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 9.525 ± .254 (.375 ± .010) 1.905 ± .127 (.075 ± .005) 8.305 ± .127 (.327 ± .005) .457 ± .076 (.018 ± .003) 1.499 ± .127 (.059 ± .005) Tape and Reel Packaging for 6 Pin Surface Mount Package 330.2 DIA. (13.00) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) 7.493 ± .102 (.295 ± .004) 12.090 (.476) 4.877 (.192) 1 6 16.002 ± .305 (.630 ± .012) 10.100 (.398) Embossed Carrier Top Cover Tape .050R TYP. 11.989 ± .102 (.472 ± .004) User Direction of Feed 10.100 ± .102 (.398 ± .004) 1.549 ± .102 (.061 ± .004) Embossment Dimensions mm (inches) Rev. 52 www.clare.com Rev. 2 5 Worldwide Sales Offices CLARE LOCATIONS Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-LCA127L-R2 ©Copyright 2001, Clare, Inc. All rights reserved. Printed in USA. 02/02/01