LIA130STR

LIA130 Optically Isolated Error Amplifier Features • Optocoupler, Precision Reference, and Error Amplifier in a Single Package • 1.240V ± 1% Reference (@ 25ºC) • Linear Optical Coupler Technology with an Industry Standard 431-type • CTR 300% to 600% Linearity • 3750Vrms Isolation Description The LIA130 is an optically isolated amplifier with a 431-type precision programmable shunt reference combined in the same package. The optocoupler portion of the LIA130 comprises a Gallium Arsenide (GaAs) light-emitting diode (LED) optically coupled to a silicon phototransistor. The current transfer ratio of the device is between 300% and 600%. The combination of features in the LIA130 is optimal for use in isolated AC-to-DC power supplies and DC-to-DC converters. It replaces several discrete components, saves valuable circuit board space, and reduces complexity. The device is available in DIP and surface-mount packages. Applications • Power System for Workstations • Telecom Central Office Supply • Telecom Bricks Block Diagram NC 1 8 LED Approvals • UL Recognized Component: File # E76270 • CSA Certified Component: Certificate # 1305490 C 2 7 FB E 3 6 COMP Ordering Information Part # LIA130 LIA130S LIA130STR Description 8 Pin DIP (50/Tube) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1000/Reel) NC 4 5 GND Pb DS-LIA130-R00C RoHS 2002/95/EC e3 PRELIMINARY 1 LIA130 Absolute Maximum Ratings (@ 25˚ C) Parameter Collector-Emitter Voltage Emitter-Collector Voltage Input Voltage Input DC Current Collector Current Input Power Dissipation 1 Transistor Power Dissipation 2 Total Power Dissipation 3 Storage Temperature Operating Temperature 1 2 3 Symbol Ratings Units VCEO 20 V VECO 7 V VLED 10 V ILED 20 mA IC 50 mA PD 145 mW PD 85 mW PD 145 mW -55 to +125 °C TSTG -40 to +85 °C TOPR Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate linearly from 25°C at a rate of 2.42 mW/ °C. Derate linearly from 25°C at a rate of 1.42 mW/ °C. Derate linearly from 25°C at a rate of 2.42 mW/ °C. Electrical Characteristics Parameter Input Characteristics @ 25°C LED forward voltage Reference voltage Deviation of VREF over temperature Ratio of VREF variation to the output of the error amplifier Feedback input current Deviation of IREF over temperature 1 Minimum drive current Off-state error amplifier current Error amplifier output impedance 2 1 Conditions ILED = 5 mA, VCOMP = VFB (Fig.1) VCOMP = VFB, ILED = 10 mA, -40 to +85°C (Fig.1) VCOMP = VFB, ILED = 10 mA, 25°C (Fig.1) TA = -40 to +85°C ILED = 10 mA, VCOMP = VREF to 10 V (Fig.2) ILED = 10 mA, R1 = 10 kΩ (Fig.3) TA = -40 to +85°C VCOMP = VFB (Fig.1) VLED = 6 V, VFB = 0 (Fig.4) VCOMP = VFB, ILED = 0.1 mA to 15 mA, f (12V - 5V) / 0.003A > 2.333kΩ [Standard values can be selected for RLED and RPULLUP and the small differences then re-calculated.] 8 PRELIMINARY R00C LIA130 MANUFACTURING INFORMATION Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Pb RoHS 2002/95/EC e3 MECHANICAL DIMENSIONS 8-Pin DIP Through-Hole Package PC Board Pattern 2.540 ± 0.127 (0.100 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 9.652 ± 0.381 (0.380 ± 0.015) 7.620 ± 0.254 (0.300 ± 0.010) 8-0.800 DIA. (8-0.031 DIA.) 2.540 ± 0.127 (0.100 ± 0.005) 9.144 ± 0.508 (0.360 ± 0.020) 6.350 ± 0.127 (0.250 ± 0.005) 7.620 ± 0.127 (0.300 ± 0.005) 0.457 ± 0.076 (0.018 ± 0.003) 4.064 TYP (0.160) 3.302 ± 0.051 (0.130 ± 0.002) 7.239 TYP. (0.285) 0.254 TYP (0.01) 7.620 ± 0.127 (0.300 ± 0.005) 0.889 ± 0.102 (0.035 ± 0.004) Dimensions mm (inches) 8-Pin Surface Mount Package 9.652 ± 0.381 (0.380 ± 0.015) 2.540 ± 0.127 (0.100 ± 0.005) 9.525 ± 0.254 (0.375 ± 0.010) 7.620 ± 0.254 (0.300 ± 0.010) 0.254 ± 0.127 (0.010 ± 0.0005) 3.302 ± 0.051 (0.130 ± 0.002) Recommended PCB Land Pattern 2.54 (0.10) 0.635 ± 0.127 (0.025 ± 0.005) 6.350 ± 0.127 (0.250 ± 0.005) 1.65 (0.0649) 8.90 (0.3503) 0.457 ± 0.076 (0.018 ± 0.003) 4.445 ± 0.127 (0.175 ± 0.005) 0.65 (0.0255) 0.813 ± 0.120 (0.032 ± 0.004) Dimensions mm (inches) R00C PRELIMINARY 9 LIA130 MECHANICAL DIMENSIONS (Cont.) Tape and Reel Packaging for 8-Pin Surface Mount Package 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) Top Cover Tape P = 12.00 (0.472) Ao = 10.30 (0.406) 1 8 W = 16.30 max (0.642 max) K0 = 4.90 (0.193) Embossed Carrier K1 = 4.20 (0.165) Bo = 10.30 (0.406) Dimensions mm (inches) User Direction of Feed Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-LIA130-R00C ©Copyright 2009, Clare, Inc. All rights reserved. Printed in USA. 11/17/09 10 PRELIMINARY