OMA160S

OMA160 Single Pole OptoMOS® Relay Load Voltage Load Current Max RON OMA160 250 50 100 Units V mA Ω Description OMA160 is a 250V, 50mA, 100Ω 1-Form-A relay. It features high speed switching capability. Features • Small 6 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified: • BS EN 60950:1992 (BS7002:1992) Certificate #:7344 • BS EN 41003:1993 Certificate #:7344 Ordering Information Part # OMA160 OMA160S OMA160STR Description 6 Pin DIP (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Pin Configuration OMA160 Pinout AC/DC Configuration + Control – Control Do Not Use 1 2 3 6 5 4 Load Do Not Use Load OMA160 Pinout DC Only Configuration 1 2 3 6 5 4 + Control – Control Do Not Use + Load – Load Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL LOAD 10%+ +90% TON 10%+ TOFF DS-OMA160-R6 www.clare.com 1 OMA160 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 2 Min 3750 -40 -40 - Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW VRMS +85 °C +125 °C +260 +220 °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Derate Linearly 1.33 mw/˚C Derate Linearly 6.67 mw/˚C Electrical Characteristics Parameter Output Characteristics @ 25°C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Capacitance Input to Output Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance Input to Output Isolation Conditions 10ms IL=50mA IL=80mA VL=250V IF=10mA,VL=10V IF=10mA,VL=10V 50V, f=1MHz IL=50mA IF=10mA VR=5V Symbol VL IL IL ILPK RON ILEAK TON TOFF COUT IF IF VF VR IR CI/O VI/O Min 10 0.4 0.9 3750 Typ 50 15 5 3 0.7 1.2 3 Max 250 50 80 100 100 30 25 0.125 0.125 50 1.4 5 10 Units V mA mA mA Ω Ω nA ms ms pF pF mA mA V V µA pF VRMS 2 www.clare.com Rev. 6 OMA160 PERFORMANCE DATA* 35 30 Device Count (N) OMA160 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 10mADC 35 30 Device Count (N) 25 20 15 10 5 0 OMA160 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC; IF = 10mADC) 35 30 Device Count (N) 42.5 43.5 44.5 45.5 46.5 47.5 25 20 15 10 5 0 OMA160 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 367.5 374.5 381.5 388.5 395.5 402.5 On-Resistance (Ω) Blocking Voltage (V) OMA160 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC) 25 20 15 10 5 0 1.625 2.075 2.525 2.975 3.425 3.875 LED Current (mA) 25 20 15 10 5 0 OMA160 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC ) 30 25 Device Count (N) 1.625 2.075 2.525 2.975 3.425 3.875 20 15 10 5 0 OMA160 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC; IF = 10mADC) Device Count (N) Device Count (N) 0.05 0.07 0.09 0.11 0.13 0.15 LED Current (mA) Turn-On (ms) 25 20 15 10 5 0 OMA160 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 50mADC; IF = 10mADC) OMA160 Typical Load Current vs. Temperature 100 90 80 70 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 Temperature (°C) OMA160 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 0.014 0.012 Leakage (µA) 0.010 0.008 0.006 0.004 0.002 0 Load Current (mA) Device Count (N) 30mA 20mA 10mA 0.012 0.017 0.022 0.027 0.032 0.037 100 120 -40 -20 0 20 40 60 80 100 Turn-Off (ms) Temperature (°C) OMA160 Typical Blocking Voltage vs. Temperature 400 OMA160 Typical Turn-On vs. Temperature (Load Current = 50mADC) 1.50 1.25 Turn-On (ms) 1.00 0.75 0.50 0.25 0 -40 -20 0 20 40 60 10mA 20mA 80 100 Turn-Off (ms) 0.050 0.045 0.040 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 -40 OMA160 Typical Turn-Off vs. Temperature (Load Current = 50mADC) Blocking Voltage (VRMS) 395 390 385 380 375 370 365 -40 -20 0 20 40 60 80 100 Temperature (°C) 10mA -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 6 www.clare.com 3 OMA160 PERFORMANCE DATA* OMA160 Typical LED Forward Voltage Drop (V) vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 Turn-On (ms) OMA160 Typical Turn-On vs. LED Forward Current (Load Current = 50mADC) 0.18 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 OMA160 Typical Turn-Off vs. LED Forward Current (Load Current = 50mADC) 0.040 0.035 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (°C) Turn-Off (ms) 0 5 10 15 20 25 30 35 40 45 50 0.030 0.025 0.020 0.015 0 5 10 15 20 25 30 35 40 45 50 50mA 30mA 20mA 10mA 5mA LED Forward Current (mA) LED Forward Current (mA) 70 60 On-Resistance (Ω) OMA160 Typical On-Resistance vs. Temperature (Load Current = 50mADC; IF = mADC) OMA160 Typical IF for Switch Operation vs. Temperature (Load Current = 50mADC) 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 Temperature (°C) 5.000 4.500 4.000 3.500 3.000 2.500 2.000 1.500 1.000 0.500 0 -40 OMA160 Typical IF for Switch Dropout vs. Temperature LED Current (mA) 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 Temperature (°C) LED Current (mA) -20 0 20 40 60 80 100 Temperature (°C) 50 40 30 20 10 0 -10 -20 -30 -40 -50 OMA160 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 10mADC OMA160 Energy Rating Curve 0.45 0.40 Load Current (A) 0.35 0.30 0.25 0.20 0.15 0.10 0.05 0 10µs 100µs 1ms 10ms 100ms Time Load Current (mA) -3 -2 -1 0 1 2 3 1s 10s 100s Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 6 OMA160 MECHANICAL DIMENSIONS 6 Pin DIP Through Hole (Standard) 7.620 ± .254 (.300 ± .010) 3.302 (.130) 6.350 ± .127 (.250 ± .005) 9.144 ± .508 (.360 ± .020) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) PC Board Pattern (Top View) 6-.800 DIA. (6-.031 DIA.) 9.144 (.360) 6.350 ± .127 (.250 ± .005) 2.540 ± .127 (.100 ± .005) 7.620 ± .127 (.300 ± .005) 7.239 TYP. (.285) .457 ± .076 (.018 ± .003) 5.080 ± .127 (.200 ± .005) Tape and Reel Packaging for 6 Pin Surface Mount Package 330.2 DIA. (13.00) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) 7.493 ± .102 (.295 ± .004) 12.090 (.476) 4.877 (.192) 1 6 16.002 ± .305 (.630 ± .012) 10.100 (.398) Embossed Carrier Top Cover Tape .050R TYP. 11.989 ± .102 (.472 ± .004) User Direction of Feed 10.100 ± .102 (.398 ± .004) 1.549 ± .102 (.061 ± .004) Embossment Dimensions mm (inches) Rev. 6 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA/PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-OMA160-R6 ©Copyright 2001, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 6/19/01