PLA110L

PLA110L Single Pole OptoMOS® Relays Load Voltage Load Current Max RON PLA110L 400 150 25 Units V mA Ω Features • Small 6 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Current Limiting, Surface Mount and Tape & Reel Versions Available Description PLA110L is a 1-Form-A solid state relay which uses optically coupled MOSFET technology to provide 3750V of input to output isolation. The efficient current limited MOSFET switches and photovoltaic die use Clare’s patented OptoMOS® architecture. The optically-coupled input is controlled by a highly efficient GaAIAs infrared LED. The PLA110L can be used to replace mechanical relays and offers the superior reliability associated with semiconductor devices. Because they have no moving parts, they can offer faster, bounce-free switching in a more compact surface mount or through hole package. Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified: • BS EN 60950:1992 (BS7002:1992) Certificate #:7344 • BS EN 41003:1993 Certificate #:7344 Ordering Information Part # PLA110L PLA110LS PLA110LSTR Description 6 Pin Dip (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration PLA110L Pinout AC/DC Configuration + Control Ð Control NC 1 2 3 6 5 4 Load Do Not Use Load PLA110L Pinout DC Only Configuration + Control Ð Control NC 1 2 3 6 5 4 + Load Ð Load 10ms CONTROL LOAD 10%+ +90% TON 10%+ TOFF DS-PLA110L-R4.0 www.clare.com 1 PLA110L Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 2 Min 3750 -40 -40 - Typ - Max Units 1501 mW 50 mA 1 A 5 V 8002 mW +85 +125 +260 +220 VRMS °C °C °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Derate Linearly 1.33 mw/˚C Derate Linearly 6.67 mw/˚C Electrical Characteristics Parameter Output Characteristics @ 25°C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Load Current Limiting Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance Input to Output Isolation Conditions 10ms IL=150mA IL=250mA VL=400V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz Symbol VL IL IL IL RON RON ILEAK TON TOFF COUT ICL IF IF VF VR IR CI/O VI/O Min - Typ 25 235 0.7 1.2 3 - Max 400 150 250 25 9 1 0.25 - Units V mA mA mA Ω Ω µA ms ms pF mA mA mA V V µA pF VRMS 190 5 0.4 0.9 3750 280 50 1.4 5 10 - IL=150mA IF=5mA VR=5V - 2 www.clare.com Rev. 4.0 PLA110L PERFORMANCE DATA* 35 30 Device Count (N) PLA110L Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25 °C) IF = 5mADC 35 30 Device Count (N) 25 20 15 10 5 0 PLA110L Typical On-Resistance Distribution (N=50 Ambient Temperature = 25 °C) (Load Current = 150mADC; I F = 5mADC) 35 30 Device Count (N) 13.1 13.7 14.3 14.9 15.5 16.1 25 20 15 10 5 0 PLA110L Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25 °C) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 LED Forward Voltage Drop (V) 441.5 450.5 459.5 468.5 477.5 486.5 On-Resistance (Ω) Blocking Voltage (V) PLA110L Typical I F for Switch Operation (N=50 Ambient Temperature = 25 °C) (Load Current = 150mADC) 25 20 15 10 5 0 0.75 1.05 1.35 1.65 1.95 2.25 LED Current (mA) 25 20 15 10 5 0 PLA110L Typical I F for Switch Dropout (N=50 Ambient Temperature = 25 °C) PLA110L Typical Turn-On Time (N=50 Ambient Temperature = 25 °C) (Load Current = 150mADC; I F = 5mADC) 25 20 15 10 5 0 Device Count (N) Device Count (N) Device Count (N) 0.75 1.05 1.35 1.65 1.95 2.25 0.15 0.21 0.27 0.33 0.39 0.45 LED Current (mA) Turn-On (ms) PLA110L Typical Turn-Off Time (N=50 Ambient Temperature = 25 °C) (Load Current = 150mADC; I F = 5mADC) 25 PLA110L Typical Load Current vs. Temperature 300 Load Current (mA) 250 200 150 100 50 0 Leakage (µA) 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 -40 -20 0 20 40 60 80 100 120 -40 PLA110L Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Device Count (N) 20 15 10 5 0 0.05 0.07 0.09 0.11 0.13 0.15 Turn-Off (ms) 20mA 10mA 5mA -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) PLA110L Typical Blocking Voltage vs. Temperature 480 PLA110L Typical Turn-On vs. Temperature (Load Current = 150mADC) 3.0 2.5 Turn-On (ms) 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 5mA 10mA 20mA 100 120 Temperature (°C) Turn-Off (ms) 0.140 0.120 0.100 0.080 0.060 0.040 0.020 0 -40 PLA110L Typical Turn-Off vs. Temperature (Load Current = 150mADC) Blocking Voltage (V RMS) 475 470 465 460 455 450 -40 -20 0 20 40 60 80 100 Temperature (°C) 5mA -20 0 20 40 60 80 100 Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 4.0 www.clare.com 3 PLA110L PERFORMANCE DATA* PLA110L Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 Turn-On (ms) PLA110L Typical Turn-On vs. LED Forward Current (Load Current = 150mADC) 0.40 0.35 0.30 Turn-Off (ms) PLA110L Typical Turn-Off vs. LED Forward Current (Load Current = 150mADC) 0.12 0.10 0.08 0.06 0.04 0.02 0 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 100 120 Temperature (°C) 0.25 0.20 0.15 0.10 0.05 0 0 5 10 15 20 25 30 35 40 45 50 Forward Current (mA) 50mA 30mA 20mA 10mA 5mA 0 5 10 15 20 25 30 35 40 45 50 Forward Current (mA) 25 On-Resistance (Ω) PLA110L Typical On-Resistance vs. Temperature (Load Current = 150mADC; IF = 5mADC) PLA110L Typical I F for Switch Operation vs. Temperature (Load Current = 150mADC) 3.000 PLA110L Typical I F for Switch Dropout vs. Temperature (Load Current = 150mADC) 3.000 2.500 LED Current (mA) LED Current (mA) 20 15 10 5 0 -40 -20 0 20 40 60 80 100 Temperature ( °C) 2.500 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 Temperature (°C) 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 Temperature (°C) 150 Load Current (mA) 100 PLA110L Typical Load Current vs. Load Voltage (Ambient Temperature = 25 °C) IF = 5mADC PLA110L Energy Rating Curve 1.2 1.0 Load Current (A) 0.8 0.6 0.4 0.2 0 10µs 100µs 1ms 10ms 100ms Time 1s 10s 100s 50 0 -50 -100 -150 -2.5 -2.0 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 2.5 Load Voltage (V) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 4.0 PLA110L MECHANICAL DIMENSIONS 6 Pin DIP Through Hole (Standard) 7.620 ± .254 (.300 ± .010) 3.302 (.130) 6.350 ± .127 (.250 ± .005) 9.144 ± .508 (.360 ± .020) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) PC Board Pattern (Top View) 6-.800 DIA. (6-.031 DIA.) 9.144 (.360) 6.350 ± .127 (.250 ± .005) 2.540 ± .127 (.100 ± .005) 7.620 ± .127 (.300 ± .005) 7.239 TYP. (.285) .457 ± .076 (.018 ± .003) 5.080 ± .127 (.200 ± .005) 6 Pin DIP Surface Mount (“S” Suffix) 7.620 ± .254 (.300 ± .010) 4.445 ± .127 (.175 ± .005) 3.302 (.130) .635 TYP. (.025) .254 TYP. (.010) 6.350 ± .127 (.250 ± .005) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 9.525 ± .254 (.375 ± .010) 1.905 ± .127 (.075 ± .005) 8.305 ± .127 (.327 ± .005) .457 ± .076 (.018 ± .003) 1.499 ± .127 (.059 ± .005) Tape and Reel Packaging for 6 Pin Surface Mount Package 330.2 DIA. (13.00) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) 7.493 ± .102 (.295 ± .004) 12.090 (.476) 4.877 (.192) 1 6 16.002 ± .305 (.630 ± .012) 10.100 (.398) Embossed Carrier Top Cover Tape .050R TYP. 11.989 ± .102 (.472 ± .004) User Direction of Feed 10.100 ± .102 (.398 ± .004) 1.549 ± .102 (.061 ± .004) Embossment Dimensions mm (inches) Rev. 4.0 www.clare.com Rev. 2.0 5 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-PLA110L-R4.0 ©Copyright 2002, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 6/21/02