PLA134S

PLA134 Single Pole OptoMOS Relays ® Load Voltage Load Current Max RON PLA134 100 350 3 Units V mA Ω Features • Small 6 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • 3750VRMS Input/Output Isolation • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Description The PLA134 is a 1-Form-A solid state relay which uses optically coupled MosFET technology to provide 3750V of input to output isolation. The efficient MosFET switches and photovoltaic die use Clare’s patented OptoMOS® architecture. The optically-coupled input is controlled by a highly efficient GaAIAs infrared LED. The PLA134’s combination of low on resistance and high load current handling makes it suitable for a variety of industrial applications. Because solid state relays have no moving parts, they can offer faster, bounce-free switching in a more compact surface mount or through hole package than traditional electromechanical relays. Applications • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment—Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Approvals • UL Recognized: File Number E76270 • CSA Certified: File Number LR 43639-10 • BSI Certified to: • BS EN 60950:1992 (BS7002:1992) Certificate #: 7344 • BS EN 41003:1993 Certificate #: 7344 Ordering Information Part # PLA134 PLA134S PLA134STR Description 6 PIN DIP (50/Tube) 6 PIN Surface Mount (50/Tube) 6 PIN Surface Mount (1,000/Reel) Pin Configuration 10ms PLA134 Pinout AC/DC Configuration 1 2 3 6 5 4 PLA134 Pinout DC Only Configuration 1 2 3 6 5 4 CONTROL + Load – Load + Control – Control NC Load Do Not Use Load + Control – Control NC LOAD 10%+ +90% TON TOFF 10%+ DS-PLA134-R2 www.clare.com 1 PLA134 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 2 Min 3750 -40 -40 - Typ Max Units 1501 50 1 5 8002 mW mA A V mW Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for extended period may degrade the device and effect its reliability. VRMS ° +85 C +125 °C +260 +220 ° ° C C Derate Linearly 1.33 mw/˚C Derate Linearly 6.67 mw/˚C Electrical Characteristics PARAMETER Output Characteristics @ Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Capacitance Input to Output Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Input to Output Capacitance Input to Output Isolation 25°C 10ms IL=350mA IL=750mA VL=100V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz IL=350mA IF=10mA VR=5V VL IL IL ILPK RON RON ILEAK TON TOFF IF IF VF VR IR CI/O VI/O 5 0.4 0.9 3750 50 3 0.7 1.2 3 100 350 750 1.0 3.0 0.8 1 5 5 50 1.4 5 10 V mA mA A Ω Ω µA ms ms pF pF mA mA V V µA pF VRMS CONDITIONS SYMBOL MIN TYP MAX UNITS 2 www.clare.com Rev. 2 PLA134 Performance Data* 35 30 Device Count (N) 25 20 15 10 5 0 PLA134 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C) IF = 5mADC 25 20 15 10 PLA134 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 350mADC; IF = 5mADC) 25 20 15 10 5 0 PLA134 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Device Count (N) 5 0 2.2 2.25 2.3 2.35 2.4 2.45 On-Resistance (Ω) Device Count (N) 1.17 1.19 1.21 1.23 1.25 100 110 120 130 140 150 LED Forward Voltage Drop (V) Blocking Voltage (V) PLA134 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 350mADC) 25 20 15 10 5 0 0.75 1.05 1.35 1.65 1.95 2.25 LED Current (mA) PLA134 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 350mADC) 25 20 15 10 5 0 0.75 1.05 1.35 1.65 1.95 2.25 LED Current (mA) 25 20 15 10 PLA134 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 350mADC; IF = 5mADC) Device Count (N) Device Count (N) Device Count (N) 5 0 0.9 0.15 0.21 0.27 .33 .39 Turn-On (ms) 25 20 15 10 PLA134 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 350mADC; IF = 5mADC) Load Current (mA) PLA134 Typical Load Current vs. Temperature AC/DC Configuration 600 Load Current (mA) PLA134 Typical Load Current vs. Temperature DC Configuration 900 800 700 600 500 400 300 200 100 0 500 400 300 200 100 0 Device Count (N) 10mA 5mA 10mA 5mA 5 0 0.075 0.085 0.095 0.105 Turn-Off (ms) -40 -20 0 20 40 60 80 100 120 -40 -20 0 20 40 60 80 100 120 Temperature (°C) Temperature (°C) PLA134 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) 0.018 Blocking Voltage (VRMS) 0.016 0.014 Leakage (µA) 0.012 0.01 0.008 0.006 0.004 0.002 0 -40 -20 0 20 40 60 80 100 Temperature (°C) PLA134 Typical Blocking Voltage vs. Temperature 175 150 PLA134 Typical Turn-On vs. Temperature (Load Current = 200mADC) 0.7 0.6 Turn-On (ms) 0.5 0.4 0.3 0.2 0.1 5mA 125 100 75 50 25 0 -40 -20 0 20 40 60 80 100 Temperature (°C) 0 -40 -20 0 20 40 60 80 100 Temperature (°C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. Rev. 2 www.clare.com 3 PLA134 Performance Data* PLA134 Typical Turn-Off vs. Temperature (Load Current = 200mADC) 0.10 0.09 Turn-Off (ms) LED Forward Voltage Drop (V) 0.11 PLA134 Typical LED Forward Voltage Drop vs. Temperature 1.8 1.6 Turn-On (ms) PLA134 Typical Turn-On vs. LED Forward Current (Load Current = 200mADC) 0.3 0.25 0.2 0.15 0.1 0.05 0 0 5 10 15 20 25 30 35 40 45 50 0.08 0.07 0.06 0.05 0.04 0.03 0 -40 -20 0 20 40 60 80 100 Temperature (°C) 5mA 1.4 1.2 1.0 0.8 -40 -20 0 20 40 60 80 50mA 10mA 5mA 100 120 Temperature (°C) LED Forward Current (mA) PLA134 Typical Turn-Off vs. LED Forward Current (Load Current = 200mADC) 0.20 0.18 0.16 0.14 0.12 0.10 0.08 0.06 0.04 0.02 0 0 5 10 15 20 25 30 35 40 45 50 LED Forward Current (mA) PLA134 Typical On-Resistance vs. Temperature (Load Current = Max. Rated at Temperature) AC/DC Configuration 6 5 4 3 2 5mA Instantaneous 1 0 -40 -20 0 20 40 60 80 100 Temperature (°C) PLA134 Typical On-Resistance vs. Temperature (Load Current = Max. Rated at Temperature) DC Configuration 3.0 2.5 2.0 1.5 1.0 0.5 0 -40 -20 0 20 40 60 80 100 Temperature (°C) 5mA 10mA On-Resistance (Ω) PLA134 Typical IF for Switch Operation vs. Temperature (Load Current = 200mADC) 3.000 LED Current (mA) 2.500 LED Current (mA) 2.000 1.500 1.000 0.500 0 -40 -20 0 20 40 60 80 100 Temperature (°C) PLA134 Typical IF for Switch Dropout vs. Temperature (Load Current = 200mADC) 3.000 2.500 400 300 On-Resistance (Ω) Turn-Off (ms) 5mA 10mA PLA134 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C) IF = 5mADC Load Current (mA) -40 -20 0 20 40 60 80 100 200 100 0 -100 -200 -300 -400 -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.000 1.500 1.000 0.500 0 Temperature (°C) Load Voltage (V) PLA134 Energy Rating Curve 1.2 1.0 Load Current (A) 0.8 0.6 0.4 0.2 0 10µs 100µs 1ms 10ms 100ms Time 1s 10s 100s *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com Rev. 2 PLA134 Mechanical Dimensions 6 Pin DIP Through Hole (Standard) 6-.800 DIA. 2.540 ± .127 (6-.031 DIA.) (.100 ± .005) 8.382 – .387 (.330 – .025) 6.350 ± .067 (.250 ± .005) 7.620 ± .127 (.300 ± .005) 5.08 ± .127 (.200 ± .005) 6.350 + .127 (.250 – .005) 6 Pin DIP Through Hole (Standard) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 7.620 ± .254 (.300 ± .010) 3.302 7.239 TYP. (.285) (.130) 6.350 ± .127 (.250 ± .005) (.100 ± .005) 9.144 (.360) 9.144 ± .508 (.360 ± .020) .457 ± .076 (.018 ± .003) Dimensions mm (inches) Rev. 2 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA/PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-PLA134-R2 ©Copyright 2001, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 1/25/01