PLA191

PLA191 Single Pole OptoMOS® Relays Load Voltage Load Current Max RON PLA191 400 250 8 Units V mA Ω Description The PLA191 is a 1-Form-A solid state relay that uses optically coupled relay technology to provide an enhanced 5000V isolation barrier between the input and the output of the relay. The efficient MOSFET switches use Clares patented OptoMOS architecture. The optically coupled input is controlled by a highly efficient GaAIAs infrared LED. Features • 5000VRMS Input/Output Isolation • Small 6 Pin DIP Package • Low Drive Power Requirements (TTL/CMOS Compatible) • No Moving Parts • High Reliability • Arc-Free With No Snubbing Circuits • FCC Compatible • VDE Compatible • No EMI/RFI Generation • Machine Insertable, Wave Solderable • Surface Mount and Tape & Reel Versions Available Applications • Telecommunications • Telecom Switching • Tip/Ring Circuits • Modem Switching (Laptop, Notebook, Pocket Size) • Hookswitch • Dial Pulsing • Ground Start • Ringer Injection • Instrumentation • Multiplexers • Data Acquisition • Electronic Switching • I/O Subsystems • Meters (Watt-Hour, Water, Gas) • Medical Equipment-Patient/Equipment Isolation • Security • Aerospace • Industrial Controls Approvals • UL Approved to UL1577 • CSA Certified • Complies with EN60950 Ordering Information Part # PLA191 PLA191S PLA191STR Description 6 Pin Dip (50/Tube) 6 Pin Surface Mount (50/Tube) 6 Pin Surface Mount (1000/Reel) Pin Configuration PLA191 Pinout AC/DC Configuration + Control Ð Control NC 1 2 3 6 5 4 Load Do Not Use Load PLA191 Pinout DC Only Configuration + Control Ð Control NC 1 2 3 6 5 4 + Load Ð Load Switching Characteristics of Normally Open (Form A) Devices 10ms CONTROL + 90% LOAD 10% + TON 10%+ TOFF DS-PLA191-R1 www.clare.com 1 PLA191 Absolute Maximum Ratings (@ 25˚ C) Parameter Input Power Dissipation Input Control Current Peak (10ms) Reverse Input Voltage Total Power Dissipation Isolation Voltage Input to Output Operational Temperature Storage Temperature Soldering Temperature DIP Package Surface Mount Package (10 Seconds Max.) 1 2 Min 5000 -40 -40 - Typ Max Units - 1501 mW 50 mA 1 A 5 V - 8002 mW VRMS +85 °C +125 °C +260 +220 °C °C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at these or any other conditions beyond those indicated in the operational sections of this data sheet is not implied. Exposure of the device to the absolute maximum ratings for an extended period may degrade the device and effect its reliability. Derate Linearly 1.33 mw/˚C Derate Linearly 6.67 mw/˚C Electrical Characteristics Parameter Output Characteristics @ 25°C Load Voltage (Peak) Load Current (Continuous) AC/DC Configuration DC Configuration Peak Load Current On-Resistance AC/DC Configuration DC Configuration Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacita nce Input Characteristics @ 25°C Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Voltage Reverse Input Current Common Characteristics @ 25°C Input to Output Capacitance Input to Output Isolation Conditions 10ms IL=150mA IL=250mA VL=400V IF=5mA, VL=10V IF=5mA, VL=10V 50V; f=1MHz IL=150mA IF=5mA VR=5V (60 seconds) Symbol VL IL IL IL RON RON ILEAK TON TOFF COUT IF IF VF VR IR CI/O VI/O Min 5 0.4 0.9 5000 Typ 65 0.7 1.2 3 Max 400 250 350 500 8 3 1 3.0 1.0 50 1.4 5 10 Units V mA mA mA Ω Ω µA ms ms pF mA mA V V µA pF VRMS 2 www.clare.com R1 PLA191 PERFORMANCE DATA* PLA191 Typical LED Forward Voltage Drop (N=50 Ambient Temperature = 25°C; IF = 5mADC) 35 30 PLA191 Typical On-Resistance Distribution (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC; IF = 5mADC) 35 30 !# ! Device Count (N) PLA191 Typical Blocking Voltage Distribution (N=50 Ambient Temperature = 25°C) Device Count (N) Device Count (N) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 1.25 25 20 15 10 5 0 5.03 5.38 5.73 6.08 6.43 6.78 #  #  #  "! "" "#" "$$ "%& "' LED Forward Voltage Drop (V) On-Resistance (Ω) Blocking Voltage (V) PLA191 Typical IF for Switch Operation (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC) 25 25 PLA191 Typical IF for Switch Dropout (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC) PLA191 Typical Turn-On Time (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC; IF = 5mADC) 25 20 Device Count (N) 15 Device Count (N) Device Count (N) 20 20 15 15 10 10 10 5 5 5 0 1.5 2.1 2.7 3.3 3.9 4.5 0 0.9 1.5 2.1 2.7 3.3 3.9 0 0.39 0.65 0.91 1.17 1.43 1.69 Current (mA) Current (mA) Turn-On (ms) PLA191 Typical Turn-Off Time (N=50 Ambient Temperature = 25°C) (Load Current = 250mADC; IF = 5mADC) 25 20 350 Load Current (mA) PLA191 Typical Load Current vs. Temperature 0.12 0.10 PLA191 Typical Leakage vs. Temperature (Measured across Pins 4 & 6) Device Count (N) 300 Leakage (µA) 15 250 200 150 100 -40 -20 0 20 40 60 0.08 0.06 0.04 0.02 0 -40 -20 0 20 40 60 80 100 10 20mA 10mA 5mA 5 0 0.018 0.030 0.042 0.054 0.066 0.078 80 100 120 Turn-Off (ms) Temperature (°C) Temperature (°C) PLA191 Typical Blocking Voltage vs. Temperature 485 PLA191 Typical Turn-On vs. Temperature (Load Current = 250mADC) 2.50 0.070 PLA191 Typical Turn-Off vs. Temperature (Load Current = 250mADC) 0.060 Blocking Voltage (VRMS) 480 475 470 465 460 455 450 445 -40 -20 0 20 40 60 80 100 5mA 2.00 Turn-On (ms) 1.50 Turn-Off (ms) 0.050 0.040 0.030 0.020 0.010 0 1.00 10mA 0.50 5mA 20mA -40 -20 0 20 40 60 80 100 0 -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) Temperature (°C) The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R1 www.clare.com 3 PLA191 PERFORMANCE DATA* PLA191 Typical LED Forward Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.8 1.6 PLA191 Typical Turn-On vs. LED Forward Current (Load Current = 250mADC) 1.0 0.9 0.8 PLA191 Typical Turn-Off vs. LED Forward Current (Load Current = 250mADC) 0.050 0.045 0.040 Turn-Off (ms) Turn-On (ms) 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.035 0.030 0.025 0.020 0.015 0.010 0.005 0 1.4 1.2 1.0 50mA 30mA 20mA 10mA 5mA 0.8 -40 -20 0 20 40 60 80 100 120 0 0 5 10 15 20 25 30 35 40 45 50 0 5 10 15 20 25 30 35 40 45 50 Temperature (°C) LED Forward Current (mA) LED Forward Current (mA) PLA191 Typical On-Resistance vs. Temperature (Load Current = 250mADC; IF = 5mADC) 10 9 8 7 6 5 4 3 2 1 0 -40 -20 0 20 40 60 80 100 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 PLA191 Typical IF for Switch Operation vs. Temperature (Load Current = 250mADC) -40 -20 0 20 40 60 80 100 5.0 4.5 4.0 3.5 3.0 2.5 2.0 1.5 1.0 0.5 0 PLA191 Typical IF for Switch Dropout vs. Temperature (Load Current = 250mADC) On-Resistance (Ω) LED Current (mA) LED Current (mA) -40 -20 0 20 40 60 80 100 Temperature (°C) Temperature (°C) Temperature (°C) PLA191 Typical Load Current vs. Load Voltage (Ambient Temperature = 25°C; IF = 5mADC) 250 200 1.2 PLA191 Energy Rating Curve 1.0 Load Current (mA) 100 50 0 -50 -100 -150 -200 -250 -2.0 Load Current (A) -1.5 -1.0 -0.5 0 0.5 1.0 1.5 2.0 150 0.8 0.6 0.4 0.2 0 10µs 100µs 1ms 10ms 100ms 1s 10s 100s Load Voltage (V) Time *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R1 PLA191 Mechanical Dimensions 6 Pin DIP Through Hole (Standard) 7.620 ± .254 (.300 ± .010) 3.302 (.130) 6.350 ± .127 (.250 ± .005) 9.144 ± .508 (.360 ± .020) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) PC Board Pattern (Top View) 6-.800 DIA. (6-.031 DIA.) 9.144 (.360) 6.350 ± .127 (.250 ± .005) 2.540 ± .127 (.100 ± .005) 7.620 ± .127 (.300 ± .005) 7.239 TYP. (.285) .457 ± .076 (.018 ± .003) 5.080 ± .127 (.200 ± .005) 6 Pin DIP Surface Mount (“S” Suffix) 7.620 ± .254 (.300 ± .010) 4.445 ± .127 (.175 ± .005) 3.302 (.130) .635 TYP. (.025) .254 TYP. (.010) 6.350 ± .127 (.250 ± .005) 8.382 ± .635 (.330 ± .025) 2.540 ± .127 (.100 ± .005) PC Board Pattern (Top View) 2.540 ± .127 (.100 ± .005) 9.525 ± .254 (.375 ± .010) 1.905 ± .127 (.075 ± .005) 8.305 ± .127 (.327 ± .005) .457 ± .076 (.018 ± .003) 1.499 ± .127 (.059 ± .005) Tape and Reel Packaging for 6 Pin Surface Mount Package 330.2 DIA. (13.00) 2.007 ± .102 1.498 ± .102 3.987 ± .102 (.079 ± .004) (.059 ± .004) (.157 ± .004) Top Cover Tape Thickness .102 MAX. (.004) 6.731 MAX. 1.753 ± .102 (.265) (.069 ± .004) .406 MAX. (.016) 7.493 ± .102 (.295 ± .004) 12.090 (.476) 4.877 (.192) 1 6 16.002 ± .305 (.630 ± .012) 10.100 (.398) Embossed Carrier Top Cover Tape .050R TYP. 11.989 ± .102 (.472 ± .004) User Direction of Feed 10.100 ± .102 (.398 ± .004) 1.549 ± .102 (.061 ± .004) Embossment Dimensions mm (inches) R1 www.clare.com 5 Worldwide Sales Offices CLARE LOCATIONS Clare Headquarters 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Clare Micronix Division 145 Columbia Aliso Viejo, CA 92656-1490 Tel: 1-949-831-4622 Fax: 1-949-831-4628 EUROPE European Headquarters CP Clare nv Bampslaan 17 B-3500 Hasselt (Belgium) Tel: 32-11-300868 Fax: 32-11-300890 France Clare France Sales Lead Rep 99 route de Versailles 91160 Champlan France Tel: 33 1 69 79 93 50 Fax: 33 1 69 79 93 59 Germany Clare Germany Sales ActiveComp Electronic GmbH Mitterstrasse 12 85077 Manching Germany Tel: 49 8459 3214 10 Fax: 49 8459 3214 29 Italy C.L.A.R.E.s.a.s. Via C. Colombo 10/A I-20066 Melzo (Milano) Tel: 39-02-95737160 Fax: 39-02-95738829 Sweden Clare Sales Comptronic AB Box 167 S-16329 Spånga Tel: 46-862-10370 Fax: 46-862-10371 United Kingdom Clare UK Sales Marco Polo House Cook Way Bindon Road Taunton UK-Somerset TA2 6BG Tel: 44-1-823 352541 Fax: 44-1-823 352797 ASIA PACIFIC Asian Headquarters Clare Room N1016, Chia-Hsin, Bldg II, 10F, No. 96, Sec. 2 Chung Shan North Road Taipei, Taiwan R.O.C. Tel: 886-2-2523-6368 Fax: 886-2-2523-6369 SALES OFFICES AMERICAS Americas Headquarters Clare 78 Cherry Hill Drive Beverly, MA 01915 Tel: 1-978-524-6700 Fax: 1-978-524-4900 Toll Free: 1-800-27-CLARE Eastern Region Clare P.O. Box 856 Mahwah, NJ 07430 Tel: 1-201-236-0101 Fax: 1-201-236-8685 Toll Free: 1-800-27-CLARE Central Region Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 Western Region Clare 1852 West 11th Street, #348 Tracy, CA 95376 Tel: 1-209-832-4367 Fax: 1-209-832-4732 Toll Free: 1-800-27-CLARE Canada Clare Canada Ltd. 3425 Harvester Road, Suite 202 Burlington, Ontario L7N 3N1 Tel: 1-905-333-9066 Fax: 1-905-333-1824 http://www.clare.com Clare cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in this Clare product. No circuit patent licenses nor indemnity are expressed or implied. Clare reserves the right to change the specification and circuitry, without notice at any time. The products described in this document are not intended for use in medical implantation or other direct life support applications where malfunction may result in direct physical harm, injury or death to a person. Specification: DS-PLA191-R1 ©Copyright 2000, Clare, Inc. OptoMOS® is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 4/3/01