0201DS-12NXJL

Document 699-1 Chip Inductors - 0201DS Series (0503) • 0201 size; world’s smallest wirewound inductor • 30 inductance values from 0.5 to 14 nH Inductance2 (nH) 0.5 0.6 1.2 1.3 1.4 1.5 2.3 2.4 2.5 3.3 3.4 3.5 3.6 3.7 3.8 3.9 4.8 5.2 5.5 6.7 7.0 7.5 8.2 8.7 9.0 9.4 9.6 11.0 12.0 14.0 Percent tolerance 10 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com. 900 MHz L typ Q typ3 0.50 29 0.58 31 1.16 42 1.24 38 1.35 27 1.47 28 2.28 45 2.36 35 2.50 31 3.31 42 3.38 42 3.41 44 3.53 40 3.65 39 3.81 38 3.89 35 4.83 34 5.21 36 5.49 35 6.71 40 6.97 39 7.44 36 8.14 37 8.68 38 9.02 42 9.38 36 9.62 38 11.11 40 12.15 39 14.13 37 1.7 GHz L typ Q typ3 0.49 43 0.58 51 1.16 60 1.24 57 1.34 37 1.47 40 2.28 64 2.36 53 2.49 44 3.32 62 3.42 62 3.45 64 3.57 61 3.66 58 3.81 60 3.89 50 4.83 50 5.21 55 5.49 50 6.72 59 6.97 60 7.46 50 8.22 53 8.74 59 9.04 63 9.39 51 9.64 53 11.15 62 12.20 56 14.37 51 SRF typ4 (GHz) 23.5 24.5 17.9 17.6 17.0 17.0 16.5 13.0 12.5 12.8 12.7 12.4 12.5 10.6 10.2 11.2 11.0 10.0 9.5 6.8 6.7 6.8 6.4 6.3 6.4 6.4 6.2 5.7 5.6 5.1 DCR max5 (Ohms) 0.020 0.030 0.042 0.048 0.080 0.090 0.070 0.082 0.165 0.080 0.080 0.080 0.105 0.105 0.180 0.240 0.096 0.170 0.285 0.150 0.210 0.340 0.270 0.350 0.350 0.400 0.400 0.400 0.360 0.440 Irms6 (mA) 1250 1000 870 820 630 600 670 620 440 630 630 630 550 550 420 360 570 430 330 460 390 300 340 300 300 280 280 280 300 270 Part number1 0201DS-0N5XKL_ 0201DS-0N6XKL_ 0201DS-1N2XJL_ 0201DS-1N3XJL_ 0201DS-1N4XJL_ 0201DS-1N5XJL_ 0201DS-2N3XJL_ 0201DS-2N4XJL_ 0201DS-2N5XJL_ 0201DS-3N3XJL_ 0201DS-3N4XJL_ 0201DS-3N5XJL_ 0201DS-3N6XJL_ 0201DS-3N7XJL_ 0201DS-3N8XJL_ 0201DS-3N9XJL_ 0201DS-4N8XJL_ 0201DS-5N2XJL_ 0201DS-5N5XJL_ 0201DS-6N7XJL_ 0201DS-7N0XJL_ 0201DS-7N5XJL_ 0201DS-8N2XJL_ 0201DS-8N7XJL_ 0201DS-9N0XJL_ 0201DS-9N4XJL_ 0201DS-9N6XJL_ 0201DS-11NXJL_ 0201DS-12NXJL_ 0201DS-14NXJL_ 1. When ordering, please specify packaging code: 0201DS-14NXJLW Packaging: W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 2. Inductance measured at 250 MHz using a Coilcraft SMD-F fixture in an Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Q measured using an Agilent/HP 4291A with an Agilent/HP 16197 test fixture. 4. SRF measured using an Agilent/HP 8722ES network analyzer and a test fixture with a 0.010″ air gap. 5. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 6. Current that causes a 15°C temperature rise from 25°C ambient. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Core material Ceramic Terminations RoHS compliant silver-platinum-glass frit. Other terminations available at additional cost. Weight 0.14 – 0.23 mg Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at