0302CS-N67XKL

Document 302 -1 Chip Inductors - 0302CS Series (0805) • 0302 size – 20% smaller than our 0402CS inductors • 34 inductance values from 0.67 to 34 nH • High Q values – up to 131 at 2.4 GHz! Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com. Part number1 0302CS-N67XKL_ 0302CS-1N7XJL_ 0302CS-1N9XJL_ 0302CS-2N1XJL_ 0302CS-3N0XJL_ 0302CS-3N3XJL_ 0302CS-3N5XJL_ 0302CS-3N8XJL_ 0302CS-4N0XJL_ 0302CS-4N7XJL_ 0302CS-5N1XJL_ 0302CS-6N0XJL_ 0302CS-6N3XJL_ 0302CS-6N5XJL_ 0302CS-7N0XJL_ 0302CS-7N2XJL_ 0302CS-7N4XJL_ 0302CS-8N3XJL_ 0302CS-9N2XJL_ 0302CS-10NXJL_ 0302CS-11NXJL_ 0302CS-12NXJL_ 0302CS-13NXJL_ 0302CS-15NXJL_ 0302CS-16NXJL_ 0302CS-17NXJL_ 0302CS-18NXJL_ 0302CS-19NXJL_ 0302CS-20NXJL_ 0302CS-21NXJL_ 0302CS-22NXJL_ 0302CS-23NXJL_ 0302CS-29NXJL_ 0302CS-34NXJL_ Inductance2 Percent (nH) tolerance 0.67 1.7 1.9 2.1 3.0 3.3 3.5 3.8 4.0 4.7 5.1 6.0 6.3 6.5 7.0 7.2 7.4 8.3 9.2 10.0 11.0 12.0 13.0 15.0 16.0 17.0 18.0 19.0 20.0 21.0 22.0 23.5 29.0 34.0 10 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 900 MHz L typ Q typ3 0.66 1.7 1.9 2.1 3.0 3.3 3.5 3.8 4.0 4.6 5.1 6.0 6.3 6.5 7.0 7.2 7.3 8.2 8.9 10.0 11.0 12.0 13.0 15.0 16.0 16.9 17.9 18.9 19.9 20.9 22.0 23.5 29.0 34.0 42 57 42 38 56 56 60 60 52 55 62 58 56 56 62 60 60 58 58 58 57 59 53 55 54 52 55 53 56 53 52 54 51 55 1.7 GHz L typ Q typ3 0.66 1.7 1.9 2.1 3.0 3.3 3.5 3.8 4.0 4.6 5.1 6.0 6.3 6.5 7.1 7.2 7.4 8.3 9.0 10.1 11.2 12.6 13.3 15.4 16.4 17.4 18.5 19.6 20.2 22.0 23.1 24.6 30.5 35.5 56 78 65 57 92 88 84 89 80 88 92 82 80 80 84 82 82 80 83 91 83 88 83 84 85 82 80 85 88 82 79 84 75 78 2.4 GHz L typ Q typ3 0.67 1.7 1.9 2.1 3.0 3.3 3.5 7.8 4.1 4.7 5.2 6.2 6.5 6.8 7.2 7.4 7.6 8.5 9.2 10.2 11.6 12.7 13.8 15.9 17.0 18.2 19.3 20.5 20.8 24.1 25.2 27.4 33.0 38.1 70 95 83 72 131 129 110 105 98 120 118 105 100 100 112 110 110 104 120 119 105 110 104 106 102 118 111 104 112 95 94 92 90 94 SRF typ4 (GHz) >26 16.14 16.06 15.94 15.10 11.50 11.53 10.67 11.21 12.07 9.65 8.60 9.34 8.19 8.50 9.12 7.98 8.19 7.92 7.45 6.85 6.86 6.94 6.20 6.13 6.26 6.03 5.79 5.68 5.16 4.95 5.18 4.83 4.45 DCR max5 (Ohms) 0.021 0.038 0.065 0.082 0.060 0.060 0.070 0.090 0.100 0.074 0.074 0.140 0.155 0.200 0.103 0.112 0.112 0.150 0.115 0.140 0.210 0.170 0.230 0.174 0.210 0.280 0.350 0.260 0.300 0.370 0.420 0.400 0.470 0.530 Irms6 (mA) 1600 1140 910 830 950 950 870 830 760 830 830 700 620 620 760 690 690 590 690 620 590 560 480 560 480 440 390 480 430 370 340 430 330 310 1. When ordering, please specify termination and packaging codes: 0302CS-34NXJLW Termination: L = RoHS compliant silver-platinum-glass frit. Special order: S = non-RoHS tin-lead (63/37). Packaging: W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 2. Inductance measured at 250 MHz using a Coilcraft SMD-F fixture in an Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Q measured using an Agilent/HP 4287A with an Agilent/HP 16193 test fixture. 4. SRF measured using an Agilent/HP 8722ES network analyzer and a test fixture with a 0.017″ air gap. 5. DCR measured on a micro-ohmmeter and a Coilcraft CCF858 test fixture. 6. Current that causes a 30°C temperature rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. Document 302-1 Revised 03/25/09 © Coilcraft, Inc. 2009 Document 302-2 0302CS Series (0805) Typical L vs Frequency 45 40 35 34.0 nH Typical Q vs Frequency 90 80 70 60 13.0 nH 6.0 nH 34.0 nH 2.1 nH 0.67 nH Inductance (nH) 30 25 20 15 10 5 0 1 10 100 1000 6.0 nH 2.1 nH 0.67 nH 10000 13.0 nH Q Factor 50 40 30 20 10 0 1 10 100 1000 10000 Frequency (MHz) Frequency (MHz) Designer’s Kit C370 contains 20 each of all values Core material Ceramic Terminations RoHS compliant silver-platinum-glass frit. Other terminations available at additional cost. Weight 0.4 – 0.5 mg Ambient temperature –40°C to +125°C with Irms current, +125°C to +155°C with derated current Storage temperature Component: –40°C to +155°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at