Document 422-1
Chip Inductors – 0402AF Series (1005)
• Higher inductance values than other 0402 inductors
• Ferrite construction for high current handling
• 23 inductance values from 20 nH to 560 nH
Part number1
Impedance typ (Ohms)
900 MHz 1.7 GHz
Inductance2
±5% (nH)
0402AF-200XJL_
0402AF-220XJL_
0402AF-330XJL_
0402AF-360XJL_
0402AF-390XJL_
0402AF-510XJL_
0402AF-560XJL_
0402AF-720XJL_
0402AF-780XJL_
0402AF-101XJL_
0402AF-141XJL_
0402AF-181XJL_
0402AF-201XJL_
0402AF-221XJL_
0402AF-251XJL_
0402AF-271XJL_
0402AF-301XJL_
0402AF-331XJL_
0402AF-361XJL_
0402AF-391XJL_
0402AF-421XJL_
0402AF-471XJL_
0402AF-561XJL_
20
22
33
36
39
51
56
72
78
100
140
180
200
220
250
270
300
330
360
390
420
470
560
83 118
96 146
142 207
157 249
173 263
218 330
239 360
311 453
344 522
513 850
629 949
832 1270
1110 1890
1050 1560
1230 1940
1320 1960
1550 2230
1850 2880
1920 2640
2350 2970
2270 2800
2680 3010
3620 3110
SRF
typ3
(MHz)
2600
2500
2300
2300
2200
1930
1900
1650
1600
1400
1220
1150
1000
1150
900
860
860
820
810
760
700
650
600
DCR
max4
(Ohms)
0.050
0.065
0.060
0.075
0.115
0.070
0.095
0.100
0.130
0.160
0.260
0.280
0.440
0.530
0.360
0.550
0.410
0.560
0.575
0.750
0.700
0.730
0.920
1. When ordering, please specify termination and packaging codes:
Designer’s Kit C397 contains 20 each of all values
0402AF-561XJLW
Termination: L = RoHS compliant gold over nickel over silver-palladium-glass frit.
Special order: T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: W
= 7″ machine-ready reel. EIA-481 punched paper
tape (2000 parts per full reel).
Q
= 7″ machine-ready reel. EIA-481 punched paper
tape (5000 parts per full reel).
U = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge),
use code letter W instead.
2. Inductance measured at 7.9 MHz, 0.1 Vrms, using an Agilent/HP
4286A LCR meter or equivalent with a Coilcraft SMD-F test fixture and
Coilcraft-provided correlation pieces.
3. SRF measured using Agilent/HP 8753D network analyzer and Coilcraft
SMD‑D test fixture.
4. DCR measured on Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
5. Current that causes a 15°C temperature rise from 25°C ambient.
Because of their open construction, these parts will not saturate.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
Core material Ferrite
Irms5
(mA)
1600
1300
1400
1300
830
1100
1000
1000
970
900
630
560
400
380
520
360
420
350
360
300
340
310
200
Terminations RoHS compliant gold over nickel over silver-palladiumglass frit. Other terminations available at additional cost.
Weight 0.9 – 1.1 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+100°C with derated current
Storage temperature Component: –40°C to +100°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +25 to +150 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at
很抱歉,暂时无法提供与“0402AF-330XJLW”相匹配的价格&库存,您可以联系我们找货
免费人工找货