0402CS-6N8X_L

Document 198-1 Chip Inductors – 0402CS Series (1005) Continuing in our long tradition of innovation and leadership, Coilcraft introduced the industry’s first 0402 wirewound inductor. This series shares all of the characteristics of Coilcraft’s other ceramic inductors: exceptionally high Q factors, especially at use frequencies; outstanding self-resonant frequency; tight inductance tolerance; and excellent batch-to-batch consistency. Irms Derating 120 110 100 Percent of rated Irms 90 80 70 60 50 40 30 20 10 0 -40 -20 0 20 40 60 80 100 120 140 Typical L vs Frequency 60 56 nH 50 Inductance (nH) 40 Ambient temperature (°C) B overall C D I 30 25°C 27 nH 19 nH 12 nH H 20 F A G F J I 10 5.6 nH 1 nH 1 10 100 1000 10000 0 Frequency (MHz) A max E terminal Terminal wraparound: approx 0.007/0,18 both ends Recommended Land Pattern B max 0,64 C max 0,66 D ref 0,25 E 0,51 F 0,23 G 0,56 H 0,66 I 0,36 J 0,46 mm Typical Q vs Frequency 120 110 100 90 80 12 nH 5.6 nH 19 nH 27 nH 0.047 0.025 0.026 0.010 0.020 0.009 0.022 0.026 0.014 0.018 inches 1,19 70 60 50 40 30 20 10 0 1 10 100 1000 56 nH 1 nH 10000 Frequency (MHz) Core material Ceramic Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 0.8 – 1.0 mg Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at 6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture. For SRF ≤6 GHz, measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a micro-ohmmeter. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. Document 198-2 Revised 07/07/09 © Coilcraft, Inc. 2009