0402DC-1N0XJRW

Web page Tools & software Sample & buy Support & FAQ Document 1153 -1 Chip Inductors - 0402DC Series (1005) + B overall C E Pick and place material A H F G E D terminal F Terminal wraparound: approx 0.007/0,18 both ends Recommended Land Pattern A B C max max max D E F G H 0.044 0.026 0.026 0.0185 0.006 0.014 0.024 0.026 inches 1,11 0,66 0,65 0,47 0,15 0,36 0,61 0,66 mm Typical L vs Frequency 1000 120 nH Inductance (nH) AEC Q200 125°C • 0402 ceramic wirewound chip inductor • 112 inductance values available from 0.8 nH to 120 nH, including 0.1nH incremental steps from 2.8 nH to 10 nH • Up to 40% higher Q factor and 45% lower DCR than other 0402 series • Very high SRF – as high as 28.8 GHz • Samples are available in Coilcraft Designer’s Kit C472-2 • AEC-Q200 Grade 1 qualified (–40°C to +125°C ambient) 100 56 nH 27 nH 10 nH 10 5.6 nH 1.9 nH 1.0 0.001 0.01 0.1 10 1 Frequency (GHz) Designer’s Kit C472-2 contains 20 of each 2% part Core material Ceramic Environmental  RoHS compliant without exemption, halogen free Terminations  RoHS compliant matte tin over nickel over silver-glass frit. Weight  0.7 – 1.0 mg Ambient temperature  –40°C to +125°C with Irms current Maximum part temperature  +140°C (ambient + temp rise). Storage temperature  Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)  +25 to +125 ppm/°C Moisture Sensitivity Level (MSL)  1 (unlimited floor life at