0402PA-6N2XGLU

Document 347 -1 Chip Inductors – 0402PA (1005) With current ratings as high as 1.8 A, Coilcraft’s 0402PA wirewound chip inductors are ideal for power amplifiers in TDMA, CDMA, GSM and other wireless applications. Compared to our standard 0402CS Series, they can handle up to 65% more current and have half the DC resistance. These inductors are perfect for use as an RF choke for the power supply, the LC tank between ampli   Inductance2 Percent   tolerance3   Part number1 (nH) 0402PA-0N8XJL_ 0.78 5 0402PA-1N9X_L_ 1.9 5,2 0402PA-3N4X_L_ 3.4 5,2 0402PA-3N5X_L_ 3.5 5,2 0402PA-5N8X_L_ 5.8 5,2 0402PA-6N2X_L_ 6.2 5,2 0402PA-8N2X_L_ 8.2 5,2 fier and antenna and in the amplifier bias circuit. Like our other ceramic chip inductors, they feature outstanding selfresonant frequencies and excellent Q values. Most values are available in 2% inductance tolerance. Coilcraft Designer’s Kit C373 contains samples of all 5% inductance tolerance parts. To order, contact Coilcraft or visit http://order.coilcraft.com. 900 MHz L typ   Q typ4 0.79 35 1.83 50 3.36 51 3.51 58 5.76 56 6.17 57 8.15 58 1. When ordering, specify tolerance, termination and packaging codes: 0402PA-8N2XJLW Tolerance: G = 2%  J = 5% Termination: L = RoHS compliant silver-palladium-platinum-glass frit E = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37) Packaging: W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 2. Inductance measured at 250 MHz using a Coilcraft SMD-F test fixture and Coilcraft-provided correlation pieces with an Agilent/HP 4286 impedance analyzer. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. For SRF >6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD‑D test fixture. For SRF £6 GHz, measured using anAgilent/HP 8753D network analyzer and a Coilcraft SMD‑D test fixture. 6. DCR measured on a micro-ohmmeter. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.   SRF typ5   DCR typ6   Irms7 1.7 GHz L typ   Q typ4 (MHz) (Ohms) (mA) 0.76 55 15200 0.018 1860 1.81 73 12500 0.022 1700 3.33 93 7200 0.030 1500 3.55 82 8750 0.040 1400 5.70 83 5450 0.045 1300 6.28 81 4950 0.055 1150 8.19 82 4650 0.060 1100 Core material Ceramic Environmental  RoHS compliant, halogen free optional Terminations  RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight  0.9 – 1.1 mg Ambient temperature  –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature  Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)  +25 to +125 ppm/°C Moisture Sensitivity Level (MSL)  1 (unlimited floor life at