0603AF-111XJRU

Document 773-1 Ferrite Chip Inductors – 0603AF • Higher inductance values than ceramic 0603 inductors • Heavier gauge wire for low DCR • Ferrite construction for high current handling • Inductance values from 15 nH to 10 µH Impedance typ (Ohms)  Inductance2   Part number1 ±5% (nH)  Q typ3 100 MHz   500 MHz 0603AF-15NXJR_ 15 @ 7.9 MHz 0603AF-33NXJR_ 33 @ 7.9 MHz 0603AF-111XJR_ 110 @ 7.9 MHz 0603AF-121XJR_ 120 @ 7.9 MHz 0603AF-241XJR_ 240 @ 7.9 MHz 0603AF-271XJR_ 270 @ 7.9 MHz 0603AF-471XJR_ 470 @ 7.9 MHz 0603AF-561XJR_ 560 @ 7.9 MHz 0603AF-681XJR_ 680 @ 7.9 MHz 0603AF-821XJR_ 820 @ 7.9 MHz 0603AF-102XJR_ 1000 @ 7.9 MHz 0603AF-222XJR_ 2200 @ 7.9 MHz 0603AF-472XJR_ 4700 @ 7.9 MHz 0603AF-103XJR_ 10000 @ 2.5 MHz 13@ 7.9 MHz 13@ 7.9 MHz 15 @ 7.9 MHz 15 @ 7.9 MHz 15 @ 7.9 MHz 15 @ 7.9 MHz 15 @ 7.9 MHz 16 @ 7.9 MHz 16 @ 7.9 MHz 16 @ 7.9 MHz 17 @ 7.9 MHz 16 @ 7.9 MHz 16 @ 7.9 MHz 12 @ 2.5 MHz 10 19 70 76 140 173 306 371 420 507 663 5220 2100 1400 1. When ordering, please specify termination and packaging codes: 0603AF-102XJRW Termination: R = RoHS compliant matte tin over nickel over silverplatinum-glass frit. Special order: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37). Packaging: W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 2. Inductance measured at 0.1 Vrms, using Coilcraft SMD-A fixture in Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Q measured on Agilent/HP 4395A with Agilent/HP 16193 test fixture. 4. SRF measured using Agilent/HP 8753D network analyzer with Coilcraft SMD‑D test fixture. 5. DCR measured on Cambridge Technology Micro-ohmmeter. 6. Current that causes a 15°C temperature rise from 25°C ambient. Because of their open construction, these parts will not saturate. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. typ4  DCR max5   Irms6 Color (MHz) (Ohms) (A) code    SRF 42 90 350 410 810 1023 2253 3180 3620 3300 9823 129 220 150 3500 2300 1230 1150 900 750 575 515 530 325 400 85 60 40 0.023 0.028 0.060 0.089 0.12 0.22 0.37 0.49 0.46 0.58 0.84 1.10 1.50 4.50 2.1 1.9 1.6 1.4 0.85 0.68 0.61 0.53 0.49 0.42 0.40 0.32 0.26 0.18 Yellow Red Red Black Violet Brown Orange Blue Orange Green Black Red Yellow Gray Designer’s Kit C439 contains 10 each of all values Environmental  RoHS compliant without exemption, halogen free Core material Ferrite Terminations  RoHS compliant matte tin over nickel over silverplatinum-glass frit. Other terminations available at additional cost. Weight  4.3 – 5.7 mg Ambient temperature  –40°C to +85°C with Irms current, +85°C to +100°C with derated current Storage temperature  Component: –40°C to +100°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)  +50 to +300 ppm/°C Moisture Sensitivity Level (MSL)  1 (unlimited floor life at