0603CS-3N9XJLW

Document 195-1 Chip Inductors – 0603CS (1608) 100 90 70 Q factor 12 nH 33 nH 80 68 nH 60 120 110 100 3.9 nH 90 80 70 60 50 40 30 25°C Typical Q vs Frequency Irms Derating Percent of rated Irms Ultra-small size, exceptional Q and high SRFs make these inductors ideal for high frequency applications where size is at a premium. They also have excellent DCR and current carrying characteristics. 20 10 270 nH 0 50 -40 40 -20 0 20 D 20 F 10 A 10 100 1000 E terminal Typical L vs Frequency 120 140 H Pick and place material I J F I Recommended Land Pattern Terminal wraparound: approx 0.007/0,18 both ends F G H I J 0.071 0.044 0.040 0.015 0.030 0.013 0.034 0.040 0.025 0.025 inches 270 nH 1,80 1,12 1,02 0,38 0,76 0,33 0,86 1,02 0,64 0,64 mm Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. 300 Inductance (nH) 100 G A B C D max max max ref E 400 250 200 120 nH 150 68 nH 100 33 nH 50 0 80 10000 Frequency (MHz) 350 60 C B overall 30 0 40 Ambient temperature (°C) 120 nH 12 nH 3.9 nH 10 100 1000 Frequency (MHz) 10000 Core material Ceramic Environmental  RoHS compliant, halogen free optional Terminations  RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight  3.2 – 3.7 mg Ambient temperature  –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature  Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)  +25 to +125 ppm/°C Moisture Sensitivity Level (MSL)  1 (unlimited floor life at