0603CT-2N2XJRW

Web page Sample & buy Tools & software Support & FAQ Document 485-1 Chip Inductors – 0603CT (1608) Halogen Free • Very low profile – only 60% of the height of our other 0603 inductor series • Excellent Q, low DCR and very high SRF AEC Q200 +85°C Designer’s Kit C423 contains 10 each of all stocked 5% values and Designer’s Kit C423-2 contains 10 each of all 2% values.   Inductance2 Percent 900 MHz 1.7 GHz    1   3   4 Part number (nH) tolerance L typ Q typ L typ   Q typ4 0603CT-1N0XJE_ 1.0 0603CT-1N2XJE_ 1.2 0603CT-2N0XJE_ 2.0 0603CT-2N2XJE_ 2.2 0603CT-2N3XJE_ 2.3 0603CT-2N5XJE_ 2.5 0603CT-3N0X_E_ 3.0 0603CT-3N3X_E_ 3.3 0603CT-3N6X_E_ 3.6 0603CT-3N9X_E_ 3.9 0603CT-4N3X_E_ 4.3 0603CT-4N7X_E_ 4.7 0603CT-5N1X_E_ 5.1 0603CT-5N6X_E_ 5.6 0603CT-6N8X_E_ 6.8 0603CT-7N2X_E_ 7.2 0603CT-8N2X_E_ 8.2 0603CT-9N5X_E_ 9.5 0603CT-10NX_E_ 10 0603CT-11NX_E_ 11 0603CT-12NX_E_ 12 0603CT-15NX_E_ 15 0603CT-16NX_E_ 16 0603CT-18NX_E_ 18 0603CT-20NX_E_ 20 0603CT-22NX_E_ 22 0603CT-24NX_E_ 24 0603CT-27NX_E_ 27 0603CT-30NX_E_ 30 0603CT-33NX_E_ 33 0603CT-36NX_E_ 36 0603CT-39NX_E_ 39 0603CT-43NX_E_ 43 0603CT-47NX_E_ 47 0603CT-51NX_E_ 51 0603CT-56NX_E_ 56 5 5 5 5 5 5 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 0.98 1.18 1.98 2.10 2.27 2.48 2.96 3.27 3.58 3.87 4.26 4.66 5.12 5.60 6.78 7.19 8.18 9.52 10.0 11.0 12.0 15.2 16.3 18.1 20.2 22.4 24.4 27.4 30.5 34.0 37.2 40.3 44.5 48.2 53.0 59.4 1. When ordering, specify tolerance, termination and packaging codes: 0603CT-56NXGEW Tolerance: G = 2%  J = 5% (Table shows stock tolerances in bold.) Termination: E = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. L = RoHS compliant, not halogen-free. Silver-palladiumplatinum-glass frit terminations R = RoHS compliant matte tin over nickel over silverplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge). U = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from U to W. 39 35 46 50 55 52 57 60 69 68 58 50 68 67 60 65 60 63 67 66 68 65 63 66 67 60 61 62 62 55 61 60 57 55 55 54 0.99 1.19 1.98 2.13 2.28 2.50 2.97 3.33 3.63 3.95 4.34 4.75 5.18 5.73 7.00 7.44 8.46 9.92 10.4 11.5 12.7 16.1 17.5 19.2 21.6 24.3 26.5 29.8 33.9 39.1 42.3 45.3 51.3 57.8 63.2 75.4 58 50 70 74 81 77 82 83 95 90 84 70 93 90 81 88 78 80 85 86 85 80 76 80 80 70 72 75 73 61 63 65 60 57 55 48 SRF DCR   max6   Irms7 (GHz) (Ohms) (mA)   typ5 16.0 0.045 1600 16.0 0.105 1100 12.0 0.034 1900 10.7 0.046 1600 11.0 0.046 1600 11.0 0.060 1300 10.7 0.039 1600 7.00 0.039 1600 7.00 0.044 1600 6.30 0.050 1400 6.30 0.076 1300 5.60 0.120 960 5.50 0.050 1400 5.05 0.058 1300 4.50 0.080 1200 4.50 0.047 1500 4.25 0.075 1300 3.95 0.092 1100 3.95 0.075 1300 4.00 0.110 1000 3.50 0.130 920 3.30 0.145 800 3.10 0.175 760 2.95 0.200 720 2.90 0.175 760 2.75 0.220 700 2.70 0.240 680 2.55 0.270 670 2.45 0.330 600 2.20 0.330 600 2.30 0.335 600 2.25 0.400 570 2.10 0.440 530 1.90 0.540 470 1.85 0.570 440 1.75 0.700 420 2. Inductance measured at 250 MHz, 0.1 Vrms, 0 Adc using Coilcraft SMD-A fixture in Agilent/HP 4287A impedance analyzer. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using Agilent/HP4291A with Agilent/HP 16193 test fixture. 5. SRF measured using Agilent/HP 8722ES network analyzer and Coilcraft SMD­‑D test fixture. 6. DCR measured on Cambridge Technology micro-ohmmeter and Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 485-1  Revised 03/12/20 © Coilcraft Inc. 2020 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 485-2 0603CT Series (1608) Typical L vs Frequency 100 90 90 10 nH 80 18 nH 27 nH 80 Inductance (nH) AEC Q200 +85°C 100 56 nH 70 70 60 60 50 Q Factor Halogen Free Typical Q vs Frequency 39 nH 40 30 20 18 nH 20 10 10 nH 5.6 nH 10 10 100 1000 10000 56 nH 40 27 nH 1 39 nH 50 30 0 5.6 nH 0 1 10 Frequency (MHz) B overall H C Pick and place material D D A max B max 1000 10000 Designer’s Kit C423 contains 10 each of all 5% values; Designer’s Kit C423-2 contains 10 each of all 2% values Core material Ceramic G A E terminal 100 Frequency (MHz) Environmental  RoHS compliant, halogen free F Terminations  Silver-palladium-platinum-glass frit. Other terminations available at additional cost. G Weight  1.4 – 2.3 mg Ambient temperature  –40°C to +125°C with Irms current Terminal wraparound: approx 0.006/0,15 both ends C max D E F Recommended Land Pattern G H Maximum part temperature  +140°C (ambient + temp rise). Storage temperature  Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C 0.064 0.033 0.024 0.013 0.030 0.025 0.025 0.040 inches Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles 1,63 0,84 0,61 0,33 0,76 0,64 0,64 1,02 mm Temperature Coefficient of Inductance (TCL)  +25 to +125 ppm/°C Note: Dimensions are before optional solder application. For maximum height and length dimensions including solder, add 0.006 in / 0,152 mm. For maximum width dimension including solder, add 0.0025 in / 0,0635 mm. Moisture Sensitivity Level (MSL)  1 (unlimited floor life at