0603CT-2N3XJLU

Document 485-1 Chip Inductors – 0603CT (1608) • Very low profile – only 60% of the height of our other 0603 inductor series • Excellent Q, low DCR and very high SRF Designer’s Kit C423 contains 10 each of all 5% values and Designer’s Kit C423-2 contains 10 each of all 2% values.   Inductance2 Percent 900 MHz 1.7 GHz    1   3   4 Part number (nH) tolerance L typ Q typ L typ   Q typ4 0603CT-1N0XJL_ 1.0 0603CT-1N2XJL_ 1.2 0603CT-2N0XJL_ 2.0 0603CT-2N3XJL_ 2.3 0603CT-2N5XJL_ 2.5 0603CT-3N0X_L_ 3.0 0603CT-3N3X_L_ 3.3 0603CT-3N6X_L_ 3.6 0603CT-3N9X_L_ 3.9 0603CT-4N3X_L_ 4.3 0603CT-4N7X_L_ 4.7 0603CT-5N1X_L_ 5.1 0603CT-5N6X_L_ 5.6 0603CT-6N8X_L_ 6.8 0603CT-7N2X_L_ 7.2 0603CT-8N2X_L_ 8.2 0603CT-9N5X_L_ 9.5 0603CT-10NX_L_ 10 0603CT-11NX_L_ 11 0603CT-12NX_L_ 12 0603CT-15NX_L_ 15 0603CT-16NX_L_ 16 0603CT-18NX_L_ 18 0603CT-20NX_L_ 20 0603CT-22NX_L_ 22 0603CT-24NX_L_ 24 0603CT-27NX_L_ 27 0603CT-30NX_L_ 30 0603CT-33NX_L_ 33 0603CT-36NX_L_ 36 0603CT-39NX_L_ 39 0603CT-43NX_L_ 43 0603CT-47NX_L_ 47 0603CT-51NX_L_ 51 0603CT-56NX_L_ 56 5 5 5 5 5 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 0.98 1.18 1.98 2.27 2.48 2.96 3.27 3.58 3.87 4.26 4.66 5.12 5.60 6.78 7.19 8.18 9.52 10.0 11.0 12.0 15.2 16.3 18.1 20.2 22.4 24.4 27.4 30.5 34.0 37.2 40.3 44.5 48.2 53.0 59.4 1. When ordering, specify tolerance, termination and packaging codes: 0603CT-56NXGLW Tolerance: G = 2%  J = 5% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant silver-palladium-platinum-glass frit. E = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 39 35 46 55 52 57 60 69 68 58 50 68 67 60 65 60 63 67 66 68 65 63 66 67 60 61 62 62 55 61 60 57 55 55 54 0.99 1.19 1.98 2.28 2.50 2.97 3.33 3.63 3.95 4.34 4.75 5.18 5.73 7.00 7.44 8.46 9.92 10.4 11.5 12.7 16.1 17.5 19.2 21.6 24.3 26.5 29.8 33.9 39.1 42.3 45.3 51.3 57.8 63.2 75.4 58 50 70 81 77 82 83 95 90 84 70 93 90 81 88 78 80 85 86 85 80 76 80 80 70 72 75 73 61 63 65 60 57 55 48 SRF DCR   max6   Irms7 (GHz) (Ohms) (mA)   typ5 16.0 0.045 1600 16.0 0.105 1100 12.0 0.034 1900 11.0 0.046 1600 11.0 0.060 1300 10.7 0.039 1600 7.00 0.039 1600 7.00 0.044 1600 6.30 0.050 1400 6.30 0.076 1300 5.60 0.120 960 5.50 0.050 1400 5.05 0.058 1300 4.50 0.080 1200 4.50 0.047 1500 4.25 0.075 1300 3.95 0.092 1100 3.95 0.075 1300 4.00 0.110 1000 3.50 0.130 920 3.30 0.145 800 3.10 0.175 760 2.95 0.200 720 2.90 0.175 760 2.75 0.220 700 2.70 0.240 680 2.55 0.270 670 2.45 0.330 600 2.20 0.330 600 2.30 0.335 600 2.25 0.400 570 2.10 0.440 530 1.90 0.540 470 1.85 0.570 440 1.75 0.700 420 2. Inductance measured at 250 MHz, 0.1 Vrms, 0 Adc using Coilcraft SMDA fixture in Agilent/HP 4287A impedance analyzer. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using Agilent/HP4291A with Agilent/HP 16193 test fixture. 5. SRF measured using Agilent/HP 8722ES network analyzer and Coilcraft SMD­‑D test fixture. 6. DCR measured on Cambridge Technology micro-ohmmeter and Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 485-1  Revised 01/18/12 © Coilcraft Inc. 2012 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check out web site for latest information. Document 485-2 0603CT Series (1608) Typical L vs Frequency Typical Q vs Frequency 100 100 90 90 10 nH 80 18 nH 27 nH 56 nH 70 70 60 60 50 Q Factor Inductance (nH) 80 39 nH 40 30 20 18 nH 20 10 10 nH 5.6 nH 10 10 100 1000 10000 56 nH 40 27 nH 1 39 nH 50 30 0 5.6 nH 0 1 10 Frequency (MHz) Typical Irms Derating 1000 10000 Designer’s Kit C423 contains 10 each of all 5% values; Designer’s Kit C423-2 contains 10 each of all 2% values 120 Core material Ceramic 110 Environmental  RoHS compliant, halogen free optional 100 Terminations  RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. 90 Weight  160 – 190 mg 80 Ambient temperature  –40°C to +125°C with Irms current, +125°C to +140°C with derated current 70 Storage temperature  Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C 60 50 40 Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles 30 Temperature Coefficient of Inductance (TCL)  +25 to +125 ppm/°C 25°C Percent of rated Irms 100 Frequency (MHz) 20 Moisture Sensitivity Level (MSL)  1 (unlimited floor life at