0603HC-3N9XJLU

Document 218-1 NT E R R U C H HIG Chip Inductors - 0603HC (1608) With their high current ratings and ultra-small size, these chip inductors are ideal for today’s high frequency, low voltage applications like mobile phones. They feature continuous current ratings up to 2.4 Amps DC and will handle transient currents up to 50% higher. At low inductance values, their Q factors are also higher than our standard 0603CS Series. SRF DCR   min5   max6   Irms7 Color 900 MHz 1.7 GHz   Inductance2 Percent Q   tolerance3   min4 Part number1 (nH) L typ  Q typ L typ  Q typ (MHz) (Ohms) (A) code 0603HC-1N6XJL_ 1.6 5 24 1.67 49 1.65 63 12500 0.030 2.4 Black 0603HC-3N6XJL_ 3.6 5 24 3.65 70 3.75 90 5900 0.048 2.3 Brown 0603HC-3N9XJL_ 3.9 5 25 3.74 70 3.90 90 5900 0.054 2.2 Red 0603HC-6N8XJL_ 6.8 5 35 6.72 70 7.10 75 5800 0.054 2.1 Orange 0603HC-7N5XJL_ 7.5 5 38 7.33 70 7.90 68 3700 0.059 2.1 Yellow 0603HC-10NX_L_ 10 5,2 38 9.70 73 10.5 57 3700 0.071 2.0 Green 0603HC-12NX_L_ 12 5,2 38 12.3 68 14.5 41 3000 0.075 2.0 Blue 0603HC-15NX_L_ 15 5,2 38 15.5 65 17.6 40 2800 0.080 1.9 Violet 0603HC-18NX_L_ 18 5,2 40 19.5 62 25.0 40 2800 0.099 1.9 Gray 0603HC-22NX_L_ 22 5,2 42 24.0 61 31.5 26 2400 0.099 1.8 White 0603HC-24NX_L_ 24 5,2 42 25.8 55 35.0 21 2400 0.105 1.8 Black 1. When ordering, specify tolerance, termination and packaging codes: 0603HC-24NXJLW Tolerance: G = 2%  J = 5% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant silver-palladium-platinum-glass frit. E = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 2. Inductance measured at 250 MHz using Coilcraft SMD-A fixture in Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at 250 MHz using Agilent/HP 4291A with Agilent/ HP 16193 test fixture. 5. SRF measured using Agilent/HP 8720D network analyzer and Coilcraft SMD-D test fixture. 6. DCR measured on micro-ohmmeter and Coilcraft CCF858 test fixture. 7. Current that causes a 20°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Designer’s Kit C339 contains 10 of each of all 5% parts Core material Ceramic Environmental  RoHS compliant, halogen free optional Terminations  RoHS compliant silver-palladium-platinum-glass frit. Weight  3.3 – 3.7 mg Ambient temperature  –40°C to +125°C with Irms current, +125°C to +145°C with derated current Storage temperature  Component: –40°C to +155°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)  +25 to +125 ppm/°C Moisture Sensitivity Level (MSL)  1 (unlimited floor life at