0603HP-24NXGLU

Document 537 -1 Chip Inductors – 0603HP Series (1608) 160 10 nH 120 Q Factor 120 110 100 90 80 70 60 50 40 30 25°C Typical Q vs Frequency 140 Current Derating Percent of rated Irms • Higher Q and lower DCR than other 0603 inductors • Highest SRF values – as high as 16 GHz • Excellent current handling capability – up to 2100 mA • 54 inductance values from 1.8 to 390 nH 20 100 24 nH 80 10 0 51 nH 60 330 nH 40 -40 0 20 40 0 100 1000 10000 A Frequency (MHz) Typical L vs Frequency E terminal 1000 D 150 nH 1000 Frequency (MHz) I J F I Recommended Land Pattern Terminal wraparound: approx 0.01/0,24 both ends E F G H I J 1,75 0,86 – 1,09 0,94 0,38 0,74 0,33 0,96 1,02 0,69 0,71 mm 51 nH Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. Core material  Ceramic 1 100 H Pick and place material 82 nH 10 nH 10 120 140 0.069 0.034 – 0.043 0.037 0.015 0.029 0.013 0.038 0.040 0.027 0.028 inches 24 nH 10 100 G A B C  max (min – max) max D 330 nH 100 80 C B overall F 10 60 Ambient temperature (°C) 20 Inductance (nH) -20 82 nH 150 nH 10000 Environmental  RoHS compliant, halogen free optional Terminations  RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight  2.0 – 3.2 mg Ambient temperature  –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature  Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)  +25 to +125 ppm/°C Moisture Sensitivity Level (MSL)  1 (unlimited floor life at