0603ME

Document 431-1 Chip Inductors – 0603ME Series (1608) The 0603ME chip inductors offer excellent Q values, especially at use frequencies, high SRFs, very low DCR and outstanding current handling capabilities. Designed to be compatible with other industry standards, they are available in 44 inductance values from 2.2 nH to 180 nH, some not found in any of our other 0603 series. These inductors are perfect for use in high-frequency circuits in telecommunications equipment. Their excellent current handling makes them ideal for power-amplifier applications. Contact Coilcraft to request free evaluation samples. A D E terminal B overall D G F C H Terminal wraparound: approx 0.007/0,18 both ends Recommended Land Pattern D 0,3 ±0,1 E 0,8 ±0,15 A 1,6 ±0,2 F 0.027 0,7 B 0,8 ±0,2 G 0.075 1,9 C 0,8 ±0,2 H 0.035 0,9 0.063 ±0.008 0.031 ±0.008 0.031 ±0.008 0.012 ±0.004 0.031 ±0.006 Tape and reel: 2000/7″ reel 8 mm tape width For packaging data see Tape and Reel Specifications section. Typical L vs Frequency 120 110 100 90 100 nH Typical Q vs Frequency 120 110 100 90 80 100 nH 47 nH 3.6 nH 20 nH Inductance (nH) 80 70 60 50 40 30 20 10 0 1 10 100 1000 3.6 nH 20 nH 47 nH Q Factor 10000 70 60 50 40 30 20 10 0 1 10 100 1000 10000 Frequency (MHz) Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. Document 431-1 Revised 10/05/06 © Coilcraft, Inc. 2007 Document 431-2 0603ME Series (1608) Part number1 0603ME-2N2XJL_ 0603ME-3N6XJL_ 0603ME-3N9XJL_ 0603ME-4N3XJL_ 0603ME-4N7XJL_ 0603ME-5N6XJL_ 0603ME-6N2XJL_ 0603ME-6N8XJL_ 0603ME-7N5XJL_ 0603ME-8N2XJL_ 0603ME-8N7XJL_ 0603ME-9N5XJL_ 0603ME-10NXJL_ 0603ME-11NXJL_ 0603ME-12NXJL_ 0603ME-13NXJL_ 0603ME-15NXJL_ 0603ME-16NXJL_ 0603ME-18NXJL_ 0603ME-20NXJL_ 0603ME-22NXJL_ 0603ME-24NXJL_ 0603ME-27NXJL_ 0603ME-30NXJL_ 0603ME-33NXJL_ 0603ME-36NXJL_ 0603ME-39NXJL_ 0603ME-43NXJL_ 0603ME-47NXJL_ 0603ME-51NXJL_ 0603ME-56NXJL_ 0603ME-62NXJL_ 0603ME-68NXJL_ 0603ME-72NXJL_ 0603ME-75NXJL_ 0603ME-82NXJL_ 0603ME-91NXJL_ 0603ME-R10XJL_ 0603ME-R11XJL_ 0603ME-R12XJL_ 0603ME-R13XJL_ 0603ME-R15XJL_ 0603ME-R16XJL_ 0603ME-R18XJL_ Inductance2 (nH) 2.2 3.6 3.9 4.3 4.7 5.6 6.2 6.8 7.5 8.2 8.7 9.5 10 11 12 13 15 16 18 20 22 24 27 30 33 36 39 43 47 51 56 62 68 72 75 82 91 100 110 120 130 150 160 180 Percent tolerance 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 5 Q3 nom 29 25 35 35 35 35 35 35 35 26 22 24 35 35 35 35 40 40 40 40 40 40 40 40 40 40 40 40 38 38 38 38 38 34 34 34 34 34 32 32 32 32 32 25 Q typ at 300 MHz 39 45 45 45 39 45 45 45 45 50 41 43 45 45 50 50 55 55 55 55 55 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 45 45 45 45 45 45 45 45 Q typ at 800 MHz 60 75 75 75 64 75 75 80 80 84 68 73 80 80 85 85 90 90 90 90 90 85 85 85 85 85 85 85 85 85 85 85 85 80 80 80 80 75 75 75 75 70 65 60 Q typ at 1.5 GHz 83 95 95 95 88 95 95 100 100 122 96 103 100 100 100 100 105 105 105 105 105 95 95 90 90 90 90 75 75 75 75 75 75 60 60 55 55 50 50 50 50 — — — SRF min4 (MHz) 13500 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 6000 5500 5500 4900 4600 3800 3700 3300 3200 2900 2800 2700 2600 2500 2400 2300 2200 2100 2050 2000 1900 1800 1350 1600 1450 1400 1350 1300 DCR max5 (Ohms) 0.024 0.059 0.059 0.059 0.047 0.082 0.082 0.082 0.090 0.052 0.097 0.099 0.11 0.11 0.13 0.13 0.13 0.16 0.16 0.16 0.17 0.21 0.22 0.23 0.23 0.26 0.26 0.27 0.29 0.33 0.35 0.43 0.38 0.56 0.56 0.60 0.64 0.68 1.2 1.3 1.4 1.5 2.1 2.2 Irms6 (mA) 2500 1600 1600 1600 1600 1400 1400 1400 1300 1250 1100 1100 1100 1100 1050 1050 1400 1000 1000 1000 950 950 750 650 650 600 600 600 550 550 530 450 520 470 450 400 400 380 350 310 250 240 210 200 1. When ordering, please specify termination and packaging codes: 0603ME-R18XJLW Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: W = 7″ machine-ready reel. EIA-481 punched paper tape (2000 parts per full reel). U = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter W instead. 2. Inductance measured at 100 MHz, 0.1 Vrms, 0 Adc using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Q measured at 100 MHz using an Agilent/HP4291A with Agilent/ HP 16193 test fixture. 4. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. 5. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 6. Average current for a 20°C rise above 25°C ambient. 7. Operating temperature range −40°C to +125°C. 8. Electrical specifications at 25°C. Specifications subject to change without notice. Please check our website for latest information. Document 431-2 Revised 10/05/06 © Coilcraft, Inc. 2007