0604HQ-5N0XJRC

Web page Sample & buy Tools & software Support & FAQ Document 285-1 Chip Inductors - 0604HQ (1610) Halogen Free • Combines the exceptionally high Q of an air core inductor with the rugged construction of a ceramic body component. Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com. • Provides intermediate inductance values not available in Coilcraft’s 0603, 0402 or 0906 product families AEC Q200 +125°C SRF DCR   min5   max6   Irms7 Color   Inductance2 Percent Q 900 MHz 1.7 GHz   tolerance3   min4 L typ Q typ   Part number1 (nH) L typ Q typ (GHz) (Ohms) (A)   code8 0604HQ-1N1XJL_ 1.15 5 25 1.2 40 1.2 136 12.3 0.021 3.0 Black 0604HQ-2N6XJL_ 2.6 5 45 2.6 78 2.6 163 9.3 0.026 2.0 Brown 0604HQ-4N5XJL_ 4.5 5 50 4.5 103 4.7 155 5.8 0.032 1.8 Red 0604HQ-5N0XJL_ 5.0 5 60 4.9 106 5.2 178 5.3 0.032 1.6 Orange 0604HQ-6N8XJL_ 6.8 5 60 6.9 101 7.4 172 4.7 0.035 1.8 Yellow 0604HQ-7N6XJL_ 7.6 5 60 7.4 109 7.9 137 4.4 0.035 1.5 Green 0604HQ-10NXJL_ 10.4 5 60 10.6 103 11.5 160 4.1 0.037 1.5 Blue 1. When ordering, please specify termination and packaging codes: Designer’s Kit C351 contains 10 each of all values 0604HQ-10NXJLC Termination: L = RoHS compliant silver-palladium-platinum-glass frit. R = RoHS compliant matte tin over nickel over silverplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge). B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. 2. Inductance measured at 500 MHz using a Coilcraft SMD-A fixture in an Agilent/HP 4286 impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at 500 MHz using an Agilent/HP 4291A with an Agilent/ HP 16193 test fixture. 5. For SRF less than 6 GHz, measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. For SRF greater than 6 GHz, measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD­‑D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. 8. Each part is marked with a single dot. The color dots are not unique identifiers and correspond to multiple inductance values. 9. Electrical specifications at 25°C. 10. Temperature coefficient of inductance: +25 to +125 ppm/°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Core material Ceramic Terminations  RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight  4.6 – 5.6 mg Ambient temperature  –40°C to +125°C with Irms current Maximum part temperature  +140°C (ambient + temp rise). Storage temperature  Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)  +25 to +126 ppm/°C Moisture Sensitivity Level (MSL)  1 (unlimited floor life at