0805CS-470X_L

Document 100-1 Chip Inductors – 0805CS Series (2012) • Exceptional Q values, even at high frequencies • Tight tolerances – 2% for most; 1% for some values Part number1 0805CS-020XJL_ 0805CS-3N0XJL_ 0805CS-030XJL_ 0805CS-050XJL_ 0805CS-060XJL_ 0805CS-070XJL_ 0805CS-080X_L_ 0805CS-100X_L_ 0805CS-120X_L_ 0805CS-150X_L_ 0805CS-180X_L_ 0805CS-220X_L_ 0805CS-240X_L_ 0805CS-270X_L_ 0805CS-330X_L_ 0805CS-360X_L_ 0805CS-390X_L_ 0805CS-430X_L_ 0805CS-470X_L_ 0805CS-560X_L_ 0805CS-680X_L_ 0805CS-820X_L_ 0805CS-910X_L_ 0805CS-101X_L_ 0805CS-111X_L_ 0805CS-121X_L_ 0805CS-151X_L_ 0805CS-181X_L_ 0805CS-221X_L_ 0805CS-241X_L_ 0805CS-271X_L_ 0805CS-331X_L_ 0805CS-391X_L_ 0805CS-471X_L_ 0805CS-561X_L_ 0805CS-681X_L_ 0805CS-821X_L_ • Wirewound construction provides the highest SRFs in 0805 size SRF typ5 (MHz) 12200 12200 12200 5900 5600 4800 4400 4300 4000 3200 3100 2600 2400 2580 2150 1900 2000 1800 1700 1600 1500 1330 1330 1250 1100 1100 920 920 820 770 730 650 600 375 330 310 310 Inductance2 (nH) 2.8 @ 3.0 @ 3.3 @ 5.6 @ 6.8 @ 7.5 @ 8.2 @ 10 @ 12 @ 15 @ 18 @ 22 @ 24 @ 27 @ 33 @ 36 @ 39 @ 43 @ 47 @ 56 @ 68 @ 82 @ 91 @ 100 @ 110 @ 120 @ 150 @ 180 @ 220 @ 240 @ 270 @ 330 @ 390 @ 470 @ 560 @ 680 @ 820 @ 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 200 MHz 200 MHz 200 MHz 200 MHz 150 MHz 150 MHz 150 MHz 150 MHz 150 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 100 MHz 50 MHz 25 MHz 25 MHz 25 MHz Percent tolerance3 5 5 5 5 5 5 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2 5,2,1 5,2,1 5,2,1 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 Q min4 80 @ 65 @ 50 @ 65 @ 50 @ 50 @ 50 @ 60 @ 50 @ 50 @ 50 @ 55 @ 50 @ 55 @ 60 @ 55 @ 60 @ 60 @ 60 @ 60 @ 60 @ 65 @ 65 @ 65 @ 50 @ 50 @ 50 @ 50 @ 50 @ 44 @ 48 @ 48 @ 48 @ 33 @ 23 @ 23 @ 23 @ 1500 MHz 1500 MHz 1500 MHz 1000 MHz 1000 MHz 1000 MHz 1000 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 500 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 250 MHz 100 MHz 50 MHz 50 MHz 50 MHz DCR max6 (Ohms) 0.06 0.06 0.08 0.08 0.11 0.14 0.12 0.10 0.15 0.17 0.20 0.22 0.22 0.25 0.27 0.27 0.29 0.34 0.31 0.34 0.38 0.42 0.48 0.46 0.48 0.51 0.56 0.64 0.70 1.00 1.00 1.40 1.50 1.76 1.90 2.20 2.35 Irms7 (mA) 800 800 600 600 600 600 600 600 600 600 600 500 500 500 500 500 500 500 500 500 500 400 400 400 400 400 400 400 400 350 350 310 290 250 230 190 180 Color code Gray White Black Orange Brown Green Red Blue Orange Yellow Green Blue Gray Violet Gray Orange White Yellow Black Brown Red Orange Black Yellow Brown Green Blue Violet Gray Red White Black Brown Violet Orange Green Blue 1. When ordering, specify tolerance, termination and packaging codes: 0805CS-821XGLC L F = 1% G = 2% J = 5% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). Tolerance: 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. Document 100-1 Revised 10/06/08 © Coilcraft, Inc. 2009 Document 100-2 0805CS Series (2012) Typical Q vs Frequency 100 90 80 68 nH 6.8 nH 39 nH Typical L vs Frequency 12 nH 22 nH 1000 3.3 nH 220 nH Inductance (nH) 70 120 nH 100 100 nH 39 nH 15 nH Q Factor 60 50 40 30 20 10 0 10 100 1000 10,000 270 nH 10 3.3 nH 1 10 100 1000 Frequency (MHz) Frequency (MHz) Designer’s Kit C303 contains 10 of each 5% part Designer’s Kit C303-2 contains 10 of each 2% part Core material Ceramic Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 10.2 – 11.6 mg Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +100 to +250 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at