0805CS-471XGLC

Web page Sample & buy Tools & software Support & FAQ Document 100-1 Chip Inductors – 0805CS (2012) Halogen Free AEC Q200 +125°C • Exceptional Q values, even at high frequencies • Tight tolerances – 2% for most; 1% for some values   Part number1 0805CS-020XJE_ 0805CS-3N0XJE_ 0805CS-030XJE_ 0805CS-050XJE_ 0805CS-060XJE_ 0805CS-070XJE_ 0805CS-080X_E_ 0805CS-100X_E_ 0805CS-120X_E_ 0805CS-150X_E_ 0805CS-180X_E_ 0805CS-220X_E_ 0805CS-240X_E_ 0805CS-270X_E_ 0805CS-330X_E_ 0805CS-360X_E_ 0805CS-390X_E_ 0805CS-430X_E_ 0805CS-470X_E_ 0805CS-560X_E_ 0805CS-680X_E_ 0805CS-820X_E_ 0805CS-910X_E_ 0805CS-101X_E_ 0805CS-111X_E_ 0805CS-121X_E_ 0805CS-151X_E_ 0805CS-181X_E_ 0805CS-221X_E_ 0805CS-241X_E_   Inductance2 (nH) 2.8 @ 250 MHz 3.0 @ 250 MHz 3.3 @ 250 MHz 5.6 @ 250 MHz 6.8 @ 250 MHz 7.5 @ 250 MHz 8.2 @ 250 MHz 10 @ 250 MHz 12 @ 250 MHz 15 @ 250 MHz 18 @ 250 MHz 22 @ 250 MHz 24 @ 250 MHz 27 @ 250 MHz 33 @ 250 MHz 36 @ 250 MHz 39 @ 250 MHz 43 @ 200 MHz 47 @ 200 MHz 56 @ 200 MHz 68 @ 200 MHz 82 @ 150 MHz 91 @ 150 MHz 100 @ 150 MHz 110 @ 150 MHz 120 @ 150 MHz 150 @ 100 MHz 180 @ 100 MHz 220 @ 100 MHz 240 @ 100 MHz • Wirewound construction provides the highest SRFs in 0805 size   SRF typ5   Percent DCR max6   Irms7 Color (MHz) (Ohms) (mA)   code8   tolerance3   Q min4 5 5 5 5 5 5 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2 5,2,1 5,2,1 5,2,1 5,2 5,2 80 @ 1500 MHz 65 @ 1500 MHz 50 @ 1500 MHz 65 @ 1000 MHz 50 @ 1000 MHz 50 @ 1000 MHz 50 @ 1000 MHz 60 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 55 @ 500 MHz 50 @ 500 MHz 55 @ 500 MHz 60 @ 500 MHz 55 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 65 @ 500 MHz 65 @ 500 MHz 65 @ 500 MHz 50 @ 250 MHz 50 @ 250 MHz 50 @ 250 MHz 50 @ 250 MHz 50 @ 250 MHz 44 @ 250 MHz 12200 12200 12200 5900 5600 4800 4400 4300 4000 3200 3100 2600 2400 2580 2150 1900 2000 1800 1700 1600 1500 1330 1330 1250 1100 1100 920 920 820 770 0.06 0.06 0.08 0.08 0.11 0.14 0.12 0.10 0.15 0.17 0.20 0.22 0.22 0.25 0.27 0.27 0.29 0.34 0.31 0.34 0.38 0.42 0.48 0.46 0.48 0.51 0.56 0.64 0.70 1.00 800 800 600 600 600 600 600 600 600 600 600 500 500 500 500 500 500 500 500 500 500 400 400 400 400 400 400 400 400 350 Gray White Black Orange Brown Green Red Blue Orange Yellow Green Blue Gray Violet Gray Orange White Yellow Black Brown Red Orange Black Yellow Brown Green Blue Violet Gray Red Continued on next page 1. When ordering, specify tolerance, termination and packaging codes: 0805CS-241XGEC F = 1%  G = 2%  J = 5% (Table shows stock tolerances in bold.) Termination: E = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. L = RoHS compliant, not halogen-free. Silver-palladiumplatinum-glass frit terminations. R = RoHS compliant matte tin over nickel over silverplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge). D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. Tolerance: 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMD­‑D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. 8. Each part is marked with a single dot. The color dots are not unique identifiers and correspond to multiple inductance values. 9. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 100-1  Revised 11/22/21 © Coilcraft Inc. 2021 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 100-1 0805CS Series (2012)   Part number1 Halogen Free AEC Q200 +125°C   Inductance2 (nH) 0805CS-271X_E_ 0805CS-331X_E_ 0805CS-391X_E_ 0805CS-471X_E_ 0805CS-561X_E_ 0805CS-681X_E_ 0805CS-821X_E_ 0805CS-102X_E_ 0805CS-122X_E_ 0805CS-152X_E_ 0805CS-182X_E_ 0805CS-222X_E_ 0805CS-272X_E_ 0805CS-332X_E_ 0805CS-472X_E_ 0805CS-562X_E_ 0805CS-682X_E_ 0805CS-822X_E_ 0805CS-103X_E_   SRF typ5   Percent DCR max6   Irms7 Color (MHz) (Ohms) (mA)   code8   tolerance3   Q min4 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 270 @ 100 MHz 330 @ 100 MHz 390 @ 100 MHz 470 @ 50 MHz 560 @ 25 MHz 680 @ 25 MHz 820 @ 25 MHz 1000 @ 25 MHz 1200 @ 25 MHz 1500 @ 25 MHz 1800 @ 25 MHz 2200 @ 25 MHz 2700 @ 25 MHz 3300 @ 25 MHz 4700 @ 25 MHz 5600 @ 7.9 MHz 6800 @ 7.9 MHz 8200 @ 7.9 MHz 10000 @ 7.9 MHz 48 @ 250 MHz 48 @ 250 MHz 48 @ 250 MHz 33 @ 100 MHz 23 @ 50 MHz 23 @ 50 MHz 23 @ 50 MHz 20 @ 50 MHz 22 @ 50 MHz 10 @ 25 MHz 15 @ 25 MHz 16 @ 25 MHz 18 @ 50 MHz 22 @ 25 MHz 14 @ 25 MHz 20 @ 10 MHz 20 @ 10 MHz 20 @ 10 MHz 20 @ 10 MHz 1. When ordering, specify tolerance, termination and packaging codes: 0805CS-103XGEC F = 1%  G = 2%  J = 5% (Table shows stock tolerances in bold.) Termination: E = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. L = RoHS compliant, not halogen-free. Silver-palladiumplatinum-glass frit terminations. R = RoHS compliant matte tin over nickel over silverplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge). D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. Tolerance: B overall H C Pick and place material F G A I J F E terminal A B max max I D Recommended Land Pattern Terminal wraparound: approx 0.015/0,38 both ends C max D ref E F G H I J 0.090 0.068 0.060 0.020 0.050 0.017 0.046 0.070 0.040 0.030 inches 0.080 (for values -562 and higher) 730 650 600 375 330 310 310 180 224 82 69 105 130 110 75 75 65 65 60 1.00 1.40 1.50 1.76 1.90 2.20 2.35 3.20 3.50 1.90 2.42 4.00 4.50 7.50 6.20 7.00 9.80 11 12 350 310 290 250 230 190 180 175 156 200 250 140 175 80 80 100 80 75 70 White Black Brown Violet Orange Green Blue Black Brown Brown Red Orange Red Green Yellow Violet Gray White Black 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/ HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMD­‑D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. 8. Each part is marked with a single dot. The color dots are not unique identifiers and correspond to multiple inductance values. 9. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Designer’s Kit C303 contains 10 of each 5% part Designer’s Kit C303-2 contains 10 of each 2% part Core material Ceramic Environmental  RoHS compliant, halogen free Terminations  Silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight  10.2 – 11.6 mg Ambient temperature  –40°C to +125°C with Irms current Maximum part temperature  +140°C (ambient + temp rise). Storage temperature  Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)  +100 to +250 ppm/°C Moisture Sensitivity Level (MSL)  1 (unlimited floor life at