Document 1362-1
Chip Inductors – 0805HP (2012)
• Exceptional Q values, even at high frequencies
• Tight tolerances – 2% for most
Part number1
0805HP-2N6XJR_
0805HP-6N2XJR_
0805HP-6N8XJR_
0805HP-11NX_R_
0805HP-12NX_R_
0805HP-13NX_R_
0805HP-18NX_R_
0805HP-33NX_R_
0805HP-47NX_R_
0805HP-56NX_R_
0805HP-82NX_R_
0805HP-101X_R_
0805HP-121X_R_
0805HP-151X_R_
0805HP-181X_R_
0805HP-221X_R_
0805HP-271X_R_
0805HP-331X_R_
0805HP-391X_R_
0805HP-471X_R_
0805HP-561X_R_
0805HP-681X_R_
0805HP-821X_R_
Inductance2
(nH)
2.6 @ 250 MHz
6.2 @ 250 MHz
6.8 @ 250 MHz
11 @ 250 MHz
12 @ 250 MHz
13 @ 250 MHz
18 @ 250 MHz
33 @ 250 MHz
47 @ 200 MHz
56 @ 200 MHz
82 @ 150 MHz
100 @ 150 MHz
120 @ 150 MHz
150 @ 100 MHz
180 @ 100 MHz
220 @ 100 MHz
270 @ 100 MHz
330 @ 100 MHz
390 @ 100 MHz
470 @ 50 MHz
560 @ 25 MHz
680 @ 25 MHz
820 @ 25 MHz
• Wirewound construction for highest possible self resonance
– up to 9.5 GHz
Percent SRF typ5
DCR max6
Irms7
(MHz) (Ohms) (A)
tolerance3
Q typ4
5
5
5
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
5,2
100 @ 1500 MHz
104 @ 1000 MHz
90 @ 1000 MHz
93 @ 500 MHz
91 @ 500 MHz
91 @ 500 MHz
95 @ 500 MHz
100 @ 500 MHz
105 @ 500 MHz
100 @ 500 MHz
103 @ 500 MHz
100 @ 500 MHz
80 @ 250 MHz
80 @ 250 MHz
77 @ 250 MHz
75 @ 250 MHz
75 @ 100 MHz
54 @ 100 MHz
52 @ 100 MHz
52 @ 100 MHz
46 @ 100 MHz
46 @ 100 MHz
50 @ 100 MHz
1. When ordering, specify tolerance, termination and packaging codes:
0805HP-821XJRC
Tolerance: G = 2% J = 5%
Termination: R = RoHS matte tin over nickel over silver-platinum-glass frit
Special order: Q = RoHS tin-silver-copper (95.5/4/0.5)
over tin or P = non-RoHS tin-lead (63/37) over tin.
Packaging: C
= 7″ machine-ready reel. EIA-481 embossed plastic
tape (2000 parts per full reel).
B = Less than full reel. In tape, but not machine ready.
To have a leader and trailer added ($25 charge), use
code letter C instead.
D
= 13″ machine-ready reel. EIA-481 embossed plastic tape.
Factory order only, not stocked (7500 parts per full reel).
2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/
HP 4286A impedance analyzer with Coilcraft-provided correlation
pieces.
3. Tolerances in bold are stocked for immediate shipment.
4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test
fixture.
5. SRF measured using an Agilent/HP 8720D network analyzer and a
Coilcraft SMD‑D test fixture.
6. DCR measured on a Cambridge Technology micro-ohmmeter and a
Coilcraft CCF858 test fixture.
7. Current that causes a 15°C temperature rise from 25°C ambient. This
information is for reference only and does not represent absolute
maximum ratings.
8. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components” before soldering.
9500
7200
6000
4750
4425
4100
3650
2410
2170
1815
1525
1400
1265
1150
1025
930
830
770
700
640
550
535
485
0.015
0.027
0.066
0.039
0.039
0.039
0.050
0.087
0.093
0.122
0.168
0.220
0.293
0.288
0.374
0.426
0.754
1.004
1.110
1.559
2.067
2.355
3.945
2.0
1.5
1.3
1.6
1.4
1.4
1.2
1.1
1.0
0.95
0.82
0.72
0.62
0.60
0.54
0.50
0.42
0.36
0.33
0.28
0.24
0.21
0.18
Core material Ceramic
Environmental RoHS compliant, halogen free
Terminations RoHS compliant matte tin over nickel over silverplatinum-glass frit. Other terminations available at additional cost.
Weight 9.5 – 12.5 mg
Ambient temperature –40°C to +125°C with Irms current
Maximum part temperature +140°C (ambient + temp rise).
Storage temperature Component: –40°C to +140°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Temperature Coefficient of Inductance (TCL) +100 to +250 ppm/°C
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at
很抱歉,暂时无法提供与“0805HP-2N6XJRB”相匹配的价格&库存,您可以联系我们找货
免费人工找货