0805HT-R27T_L

Document 168-1 Chip Inductors – 0805HT Series (2012) At just 0.035″ high, these are one of our lowest profile surface mount inductors. Their wire wound ceramic design provides tight tolerances, exceptional Q and high SRF values. Part number1 0805HT-1N8TJL_ 0805HT-2N0TJL_ 0805HT-3N9TJL_ 0805HT-4N3TJL_ 0805HT-4N7TJL_ 0805HT-5N1TJL_ 0805HT-5N6TJL_ 0805HT-6N8TJL_ 0805HT-7N5TJL_ 0805HT-8N2TJL_ 0805HT-9N1TJL_ 0805HT-10NT_L_ 0805HT-12NT_L_ 0805HT-15NT_L_ 0805HT-18NT_L_ 0805HT-20NT_L_ 0805HT-22NT_L_ 0805HT-27NT_L_ 0805HT-33NT_L_ 0805HT-39NT_L_ 0805HT-47NT_L_ 0805HT-56NT_L_ 0805HT-68NT_L_ 0805HT-82NT_L_ 0805HT-R10T_L_ 0805HT-R12T_L_ 0805HT-R15T_L_ 0805HT-R18T_L_ 0805HT-R22T_L_ 0805HT-R27T_L_ 0805HT-R33T_L_ 0805HT-R39T_L_ 0805HT-R47T_L_ 0805HT-R50T_L_ Coilcraft Designer’s Kit C321 contains samples of all 5% parts shown as stocked. To order, contact Coilcraft or visit http://order.coilcraft.com to purchase on-line. Q min4 SRF min5 (MHz) 9400 11500 6100 6364 5500 6100 5800 4800 4600 4800 3900 3300 3800 2950 3100 2700 2900 2450 2350 2200 2000 1850 1500 1500 1200 1150 1050 830 820 790 730 675 610 585 Inductance2 (nH) 1.8 2.0 3.9 4.3 4.7 5.1 5.6 6.8 7.5 8.2 9.1 10 12 15 18 20 22 27 33 39 47 56 68 82 100 120 150 180 220 270 330 390 470 500 @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 250 MHz @ 200 MHz @ 200 MHz @ 200 MHz @ 150 MHz @ 150 MHz @ 150 MHz @ 150 MHz @ 150 MHz @ 150 MHz @ 150 MHz @ 150 MHz @ 100 MHz @ 100 MHz @ 50 MHz Percent tolerance3 5 5 5 5 5 5 5 5 5 5 5 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2,1 5,2,1 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 5,2 DCR max6 (Ohms) 0.030 0.018 0.055 0.030 0.060 0.069 0.091 0.080 0.082 0.080 0.105 0.080 0.10 0.10 0.13 0.17 0.15 0.19 0.19 0.27 0.30 0.39 0.40 0.44 0.64 0.68 0.80 0.86 1.29 1.40 1.93 2.80 3.10 3.20 Irms7 (mA) 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 800 700 600 600 600 500 500 500 400 300 300 300 200 200 200 200 200 200 Color Code Black Violet Brown White Red Blue Gray Orange Black Yellow Red Green Blue Violet Gray Yellow White Black Brown Red Orange Yellow Green Blue Violet Gray White Black Orange Yellow Green Blue Violet Gray 55 @ 1500 MHz 55 @ 1500 MHz 50 @ 1000 MHz 80 @ 1000 MHz 50 @ 1000 MHz 45 @ 1000 MHz 45 @ 1000 MHz 50 @ 1000 MHz 47 @ 1000 MHz 50 @ 1000 MHz 54 @ 1000 MHz 55 @ 750 MHz 55 @ 750 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 55 @ 500 MHz 55 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 40 @ 250 MHz 40 @ 250 MHz 40 @ 250 MHz 39 @ 150 MHz 33 @ 150 MHz 32 @ 150 MHz 30 @ 150 MHz 30 @ 150 MHz 20 @ 50 MHz 1. When ordering, specify tolerance, termination and packaging codes: 0805HT-R22TGLC Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Tolerance: F = 1% G = 2% J = 5% (Table shows stock tolerances in bold.) Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture and on an Agilent/HP 8753D with a Coilcraft SMD-D test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF858 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Specifications subject to change without notice. Please check our website for latest information. Document 168-1 Revised 10/06/08 © Coilcraft, Inc. 2009 Document 168-2 0805HT Series (2012) Typical Q vs Frequency 120 22 nH 12 nH 3.9 nH 80 150 nH 150 100 Typical L vs Frequency 200 120 nH 60 Inductance (nH) 39 nH Q factor 100 82 nH 40 50 20 33 nH 18 nH 0 10 100 1000 10000 0 1 10 100 1000 3.9 nH 10000 Frequency (MHz) Frequency (MHz) Designer’s Kit C321 contains samples of all 5% tolerance parts Core material Ceramic Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 6.0 – 6.9 mg Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at