0805USB-502MLC

Web page Sample & buy Tools & software Support & FAQ Document 306-1 USB 2.0 Common Mode Choke 0805 Halogen Free • For common mode noise suppression in high speed differential signal lines: USB2.0, IEEE1394, LVDS, etc. • Up to 3.4 GHz differential mode 3 dB cutoff frequency • Up to 2 kOhms common mode peak impedance • Over 35 dB common mode noise attenuation AEC Q200 +85°C Designer’s Kit C470 contains 10 each of all 0603USB, 0805USB, 0805USBF, 0805USBN and 1206USB parts Core material Ferrite Environmental  RoHS compliant, halogen free Terminations  Gold over nickel over silver-palladium-glass frit. Ambient temperature  –40°C to +85°C with Irms current ­Maximum part temperature  105°C (ambient + temp rise) Storage temperature  Component: –40°C to +105°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at 0.22 @ >3.0 GHz >0.29 @ >3.0 GHz 0.64 @ 1.8 GHz 0.82 @ 1.8 GHz 1.06 @ 1.4 GHz 1.42 @ 1.1 GHz 1.75 @ 0.93 GHz 2.06 @ 0.81 GHz (GHz) 3.5 2.5 1.8 1.5 0.82 0.70 0.46 0.47 Common mode DCR attenuation typ (dB)   Inductance3   max4 10 MHz  100 MHz  500 MHz min (nH) (Ohms) 1.1 1.4 2.3 3.0 4.5 4.9 8.4 8.7 2.3 4.2 6.7 8.6 11.9 14.5 16.6 18.7 1. When ordering, please specify packaging code: 0805USB-902MLC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge). B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. D = 13″ machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel). 2 Frequency at which the differential mode attenuation equals −3 dB 3. Inductance measured at 100 MHz using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture. 4. DCR is specified per winding. 5. Winding to winding isolation (hipot) tested for one minute. 6. Current per winding that causes a 20°C rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 8.4 16.9 22.0 27.8 34.3 31.3 30.0 30.5 23 47 84 147 189 273 322 413  Isolation5  Irms6 (Vrms) (mA) 0.12 0.17 0.25 0.26 0.32 0.37 0.45 0.65 0.080 ±0.004 2,03 ±0,10 250 250 250 250 250 250 250 250 500 500 500 500 500 500 500 400 1 2 4 3 0.065 max 1,65 0.020 0.040 0,51 1,02 1 0.004 0,10 0.030 0,76 0.018 0,46 0.036 0,91 2 1 3 4 0.014 0,36 2 0.050 ±0.004 1,27 ±0,10 4 Dimensions are in 3 inches mm Recommended Land Pattern 0.020 0,51 Weight  14.9 – 15.2 mg Packaging  2000/7″ reel; 7500/13″ reel;  Plastic tape:  8 mm wide, 0.23 mm thick, 4 mm pocket spacing, 1.5 mm pocket depth US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 306-1  Revised 12/01/21 © Coilcraft Inc. 2021 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 306-2 USB 2.0 Common Mode Filter — 0805 Typical Attenuation (Ref: 50 Ohms) 0 Halogen Free 10 AEC Attenuation (dB) Q200 +85°C 20 -421 -901 -262 -502 -902 30 Common mode Differential mode 40 1 10 100 1000 10000 Frequency (MHz) Typical Impedance vs Frequency 10,000 Impedance (Ohms) 1000 100 10 -421 -901 -262 -502 -902 1.0 Common mode Differential mode 0.1 1 10 100 1000 10000 Frequency (MHz) US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 306-2  Revised 12/01/21 © Coilcraft Inc. 2021 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.