0805USBF-502MRC

Web page Sample & buy Tools & software Support & FAQ Document 1270-1 Low Profile USB Common Mode Choke 0805 • For noise suppression in super high speed signal lines: USB 3.x, HDMI 2.0, HDBaseT™, DisplayPort, DVI, etc.; and in high speed differential signal lines: USB 2.0, IEEE1394, LVDS, etc. • Suitable for USB-type C specification 1.0 • Up to 6 GHz differential mode 3 dB cutoff frequency; up to 30 dB common mode noise attenuation in GHz range Core material Ferrite Environmental  RoHS compliant Terminations  Matte tin over nickel over silver-platinum-glass frit. Weight  14.7 – 15.5 mg Ambient temperature  –40°C to +125°C with Irms current. ­Maximum part temperature 140°C Storage temperature  Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at 0.14 @ >3.0 GHz >0.30 @ >3.0 GHz 0.52 @ 2.5 GHz 0.69 @ 2.0 GHz 0.93 @ 1.8 GHz 1.22 @ 1.5 GHz 1.65 @ 1.2 GHz 1.91@ 1.0 GHz 6.6 5.8 3.3 2.4 1.4 0.93 0.69 0.73 0.5 2.1 4.0 5.7 5.8 11.2 11.3 12.6 4.6 9.1 12.8 15.4 18.1 21.6 23.3 25.4 1. When ordering, please specify packaging code: 0805USBF-902MRC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel). 2 Frequency at which the differential mode attenuation equals −3 dB 3. Inductance measured at 100 MHz using an Agilent/HP 4286A impedance analyzer and a Coilcraft SMD-A fixture. 4. DCR is specified per winding. 5. Winding to winding isolation (hipot) tested for one minute. 6. Current per winding that causes a 15°C rise from 25°C ambient. 7. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. 6.9 11.8 15.7 18.5 22.3 25.2 27.7 30.0 28 60 101 165 241 315 434 560  Isolation5  Irms6 (Vrms) (mA) 0.11 0.14 0.22 0.235 0.27 0.32 0.37 0.63 0.080 ±0.004 2,03 ±0,10 250 250 250 250 250 250 250 250 500 500 500 500 500 500 450 350 1 2 4 3 0.055 max 1,40 0.004 0,10 0.020 0.040 0,51 1,02 1 0.030 0,76 0.018 0,46 0.036 0,91 2 1 3 4 0.014 0,36 2 0.050 ±0.004 1,27 ±0,10 4 Dimensions are in 3 inches mm US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Recommended Land Pattern 0.020 0,51 Document 1270-1  Revised 06/07/16 © Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 1270-2 Designer’s Kit C470 contains 10 each of all 0603USB, 0805USB, 0805USBF, 0805USBN and 1206USB parts USB 2.0, 3.x Common Mode Filter — 0805USBF Typical Attenuation (Ref: 50 Ohms) 0 Attenuation (dB) 10 20 -421 -901 -502 -262 -902 30 40 Common mode Differential mode 0.1 1 10 100 1000 10000 Frequency (MHz) Typical Impedance vs Frequency 10,000 Impedance (Ohms) 1000 100 10 -421 -901 -502 -262 -902 1.0 Common mode Differential mode 0.1 0.1 1 10 100 1000 10000 Frequency (MHz) US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 1270-2  Revised 06/07/16 © Coilcraft Inc. 2017 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information.