1008AF-103XJRC

Web page Sample & buy Tools & software Support & FAQ Document 578-1 Chip Inductors – 1008AF (2520) Halogen Free OPTION AEC Q200 85°C + • Lowest DCR and highest current rating of our 1008 size inductors • Available in 14 inductance values from 0.9 to 10 µH. Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com.   Inductance2   SRF min5   DCR max6   Isat7   Irms8 Percent   Part number1 (µH)   tolerance3   Q typ4 (MHz) (Ohms) (A) (A) 1008AF-901X_L_ 0.9 10,5 25 415 0.100 1.4 1.3 1008AF-112X_L_ 1.1 10,5 24 376 0.105 1.3 1.2 1008AF-132X_L_ 1.3 10,5 37 198 0.110 1.2 1.1 1008AF-152X_L_ 1.5 10,5 22 135 0.125 1.1 1.0 1008AF-192X_L_ 1.9 10,5 29 126 0.140 1.0 1.0 1008AF-222X_L_ 2.2 10,5 21 106 0.155 0.95 0.95 1008AF-272X_L_ 2.7 10,5 22 70 0.190 0.80 0.90 1008AF-332X_L_ 3.3 10,5 21 59 0.210 0.75 0.80 1008AF-392X_L_ 3.9 10,5 21 55 0.220 0.70 0.80 1008AF-472X_L_ 4.7 10,5 27 48 0.435 0.70 0.65 1008AF-582X_L_ 5.8 10,5 21 37 0.280 0.55 0.75 1008AF-682X_L_ 6.8 10,5 28 33 0.315 0.50 0.70 1008AF-822X_L_ 8.2 10,5 22 33.8 0.340 0.50 0.65 1008AF-103X_L_ 10.0 10,5 24 22 0.460 0.45 0.55 1. When ordering, specify tolerance, termination and packaging codes: Designer’s Kit C414 contains 10 of each 5% value 1008AF-103XJLC Tolerance: J = 5%  K = 10% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant silver-palladium-platinum-glass frit. E = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations R = RoHS compliant matte tin over nickel over silverplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge). D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. 2. Inductance measured at 2.5 MHz using Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at 2.5 MHz using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8753D network analyzer with a Coilcraft SMD-D fixture. 6. DCR measured on a Cambridge Technology Micro-ohmmeter. 7. DC current at 25°C that causes an inductance drop of 10% (typ) from its value without current. Click for temperature derating information. 8. Current that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. Click for temperature derating information. 9. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. For part marking data, visit http://www.coilcraft.com/colrcode.cfm. Core material Ferrite Terminations  RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight  28 – 33 mg Ambient temperature  –40°C to +85°C with Irms current. Maximum part temperature  +125°C (ambient + temp rise). Derating. Storage temperature  Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)  +100 to +350 ppm/°C Moisture Sensitivity Level (MSL)  1 (unlimited floor life at