1008CS-470XGLB

Document 101-1 Chip Inductors – 1008CS Series (2520) Irms Derating • High SRF and excellent Q values • Tight tolerances, many values at 1% • 39 inductance values from 10 nH to 8.2 µH 120 110 Typical Q vs Frequency 120 100 100 47 nH 90 Q Factor 80 100 nH 12 nH 70 60 330 nH 50 80 70 60 50 40 30 20 750 nH 1800 nH 40 90 25°C Percent of rated Irms 100 10 0 -40 30 -20 0 20 40 60 80 100 C B overall 10 0 20 120 140 Ambient temperature (°C) 10 100 1000 Frequency (MHz) 10000 Pick and place material F A Typical L vs Frequency E terminal H D I G J F I Terminal wraparound: approx 0.010/0,25 both ends Recommended Land Pattern A B C D max max max ref E F G H I J 0.115 0.110 0.080 0.020 0.080 0.020 0.060 0.100 0.040 0.050 inches 2,92 2,79 2,03 0,51 2,03 0,51 1,52 2,54 1,02 1,27 mm Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. Designer’s Kit C300 contains 10 each of all 5% tolerance values Core material  Ceramic Environmental  RoHS compliant, halogen free Terminations  RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight  29.6 – 37.4 mg Ambient temperature  –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature  Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)  +25 to +125 ppm/°C Moisture Sensitivity Level (MSL)  1 (unlimited floor life at