1008CT-500X_L

Document 102-1 Chip Inductors – 1008CT Series (2520) The 0.055″ profile makes these parts ideal for low clearance applications. Their simple construction ensures high reliability and stability, and they feature much Inductance2 (nH) 4.7 @ 50 MHz 8.2 @ 50 MHz 10 @ 50 MHz 15 @ 50 MHz 20 @ 50 MHz 30 @ 50 MHz 40 @ 50 MHz 50 @ 50 MHz 60 @ 50 MHz 70 @ 50 MHz 80 @ 50 MHz 90 @ 50 MHz 100 @ 50 MHz Percent3 tolerance 5 5,2 5 5,2 5,2 5,2 5,2 5,2 5,2,1 5,2,1 5,2,1 5,2 5,2 higher SRF values than ferrite alternatives. For free evaluation samples, visit www.coilcraft.com or contact Coilcraft. SRF min5 (MHz) 7500 5000 2700 3000 2400 2400 2000 1900 1800 1700 1400 1400 1000 DCR max6 (Ohms) 0.15 0.22 0.25 0.22 0.33 0.38 0.43 0.48 0.52 0.55 0.56 0.61 0.63 Irms7 (mA) 600 600 600 600 600 600 600 600 600 510 510 500 480 Part number1 1008CT-040X_L_ 1008CT-080X_L_ 1008CT-100X_L_ 1008CT-150X_L_ 1008CT-200X_L_ 1008CT-300X_L_ 1008CT-400X_L_ 1008CT-500X_L_ 1008CT-600X_L_ 1008CT-700X_L_ 1008CT-800X_L_ 1008CT-900X_L_ 1008CT-101X_L_ Q min4 28 @ 500 MHz 40 @ 500 MHz 40 @ 500 MHz 40 @ 500 MHz 50 @ 500 MHz 50 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 60 @ 500 MHz 65 @ 500 MHz 60 @ 500 MHz 1. When ordering, specify tolerance, termination and packaging codes: 1008CT-101XJLC F = 1% G = 2% J = 5% (Table shows stock tolerances in bold.) Termination: L = RoHS compliant silver-palladium-platinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape (7500 parts per full reel). 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured at using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology micro-ohmmeter and a Coilcraft CCF840 test fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Tolerance: Core material Ceramic Terminations RoHS compliant silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight 17.8 – 17.8 mg Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +25 to +125 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at