1206CS-221XJLC

Web page Tools & software Sample & buy Support & FAQ Document 104-1 Chip Inductors – 1206CS Series (3216) Halogen Free • High SRF and excellent Q values • Tight tolerances, many values at 1% • 31 inductance values from 3.3 to 1200 nH AEC Part number1 Q200 +125°C   Inductance2 (nH) 1206CS-030X_E_ 3.3 @ 100 MHz 1206CS-060X_E_ 6.8 @ 100 MHz 1206CS-100X_E_ 10 @ 100 MHz 1206CS-120X_E_ 12 @ 100 MHz 1206CS-150X_E_ 15 @ 100 MHz 1206CS-180X_E_ 18 @ 100 MHz 1206CS-220X_E_ 22 @ 100 MHz 1206CS-270X_E_ 27 @ 100 MHz 1206CS-330X_E_ 33 @ 100 MHz 1206CS-390X_E_ 39 @ 100 MHz 1206CS-470X_E_ 47 @ 100 MHz 1206CS-560X_E_ 56 @ 100 MHz 1206CS-680X_E_ 68 @ 100 MHz 1206CS-820X_E_ 82 @ 100 MHz 1206CS-101X_E_ 100 @ 100 MHz 1206CS-121X_E_ 120 @ 100 MHz 1206CS-151X_E_ 150 @ 100 MHz 1206CS-181X_E_ 180 @ 50 MHz 1206CS-221X_E_ 220 @ 50 MHz 1206CS-271X_E_ 270 @ 50 MHz 1206CS-331X_E_ 330 @ 50 MHz 1206CS-391X_E_ 390 @ 50 MHz 1206CS-471X_E_ 470 @ 50 MHz 1206CS-561X_E_ 560 @ 35 MHz 1206CS-621X_E_ 620 @ 35 MHz 1206CS-681X_E_ 680 @ 35 MHz 1206CS-751X_E_ 750 @ 35 MHz 1206CS-821X_E_ 820 @ 35 MHz 1206CS-911X_E_ 910 @ 35 MHz 1206CS-102X_E_ 1000 @ 35 MHz 1206CS-122X_E_ 1200 @ 35 MHz Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com.       Percent SRF min5   DCR max6 Irms7   tolerance3 Q min4 (MHz) (Ohms) (mA) 5 30 @ 300 MHz 5 30 @ 300 MHz 5 40 @ 300 MHz 5,2 40 @ 300 MHz 5,2 40 @ 300 MHz 5,2 50 @ 300 MHz 5,2 50 @ 300 MHz 5,2 50 @ 300 MHz 5,2 55 @ 300 MHz 5,2 55 @ 300 MHz 5,2 55 @ 300 MHz 5,2,1 55 @ 300 MHz 5,2,1 55 @ 300 MHz 5,2,1 55 @ 300 MHz 5,2,1 55 @ 300 MHz 5,2,1 60 @ 300 MHz 5,2,1 60 @ 300 MHz 5,2,1 60 @ 300 MHz 5,2,1 60 @ 300 MHz 5,2,1 55 @ 300 MHz 5,2,1 45 @ 150 MHz 5,2,1 45 @ 150 MHz 5,2,1 45 @ 150 MHz 5,2,1 45 @ 150 MHz 5,2,1 45 @ 150 MHz 5,2,1 45 @ 150 MHz 5,2,1 45 @ 150 MHz 5,2,1 45 @ 150 MHz 5,2,1 45 @ 150 MHz 5,2,1 45 @ 150 MHz 5,2,1 45 @ 150 MHz 1. When ordering, specify tolerance, termination and packaging codes: 1206CS-122XJEC F = 1%  G = 2%  J = 5% (Table shows stock tolerances in bold.) Termination: E = Halogen free component. RoHS compliant silverpalladium-platinum-glass frit terminations. L = RoHS compliant, not halogen-free. Silver-palladiumplatinum-glass frit terminations. R = RoHS compliant matte tin over nickel over silverplatinum-glass frit. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (2000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge). D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (7500 parts per full reel). B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. Tolerance: 6200 5500 4000 3200 3200 2800 2200 1800 1800 1800 1500 1450 1200 1200 1100 1100 950 900 760 730 650 600 550 470 470 450 440 420 410 400 380 0.050 0.070 0.080 0.080 0.100 0.100 0.100 0.110 0.110 0.120 0.130 0.140 0.260 0.210 0.260 0.260 0.310 0.430 0.500 0.560 0.620 0.750 1.30 1.34 1.58 1.58 2.25 1.82 2.95 2.80 3.20 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 1000 900 900 850 800 750 700 670 630 590 530 490 460 460 430 320 400 310 320 300 2. Inductance measured using a Coilcraft SMD-A fixture in an Agilent/HP 4286A impedance analyzer with Coilcraft-provided correlation pieces. 3. Tolerances in bold are stocked for immediate shipment. 4. Q measured using an Agilent/HP 4291A with an Agilent/HP 16193 test fixture. 5. SRF measured using an Agilent/HP 8720D network analyzer and a Coilcraft SMD-D test fixture. 6. DCR measured on a Cambridge Technology Micro-ohmmeter and a Coilcraft CCF840 fixture. 7. Current that causes a 15°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. 8. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Refer to Doc 174 “Color Coding” for the explanation of color dots. US +1-847-639-6400 sales@coilcraft.com UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 104-1  Revised 12/01/21 © Coilcraft Inc. 2021 This product may not be used in medical or high risk applications without prior Coilcraft approval. Specification subject to change without notice. Please check web site for latest information. Document 104-2 1206CS Series (3216) Typical Q vs Frequency Typical L vs Frequency 120 100 Q Factor + 1000 150 nH 80 AEC Q200 125°C 1200 nH 33 nH 90 70 Inductance (nH) Halogen Free 10000 3.3 nH 15 nH 110 680 nH 60 330 nH 50 40 30 560 nH 150 nH 100 47 nH 18 nH 10 3.3 nH 20 10 0 1 10 100 1000 10000 1 Frequency (MHz) C B overall H D Pick and place material F A E terminal I G J F I Recommended Land Pattern Terminal wraparound: approx 0.015/0,38 both ends A max B max C max D ref E F G 10 100 1000 Frequency (MHz) H I J 0.140 0.085 0.060 0.020 0.056 0.020 0.080 0.076 0.040 0.070 3,56 2,16 1,52 0,51 1,42 0,51 2,03 1,93 1,02 1,78 Note: Height dimension (C) is before optional solder application. For maximum height dimension including solder, add 0.006 in / 0,152 mm. Designer’s Kit C320 contains 10 each of all 5% values Core material Ceramic Environmental  RoHS compliant, halogen free Terminations  Silver-palladium-platinum-glass frit. Other terminations available at additional cost. Weight  19.5 – 23.0 mg Ambient temperature  –40°C to +125°C with Irms current Maximum part temperature  +140°C (ambient + temp rise). Storage temperature  Component: –40°C to +140°C. Tape and reel packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL)  +25 to +125 ppm/°C Moisture Sensitivity Level (MSL)  1 (unlimited floor life at