165-03A06L

Document 110-1 5 mm Tunable Inductor – 164, 165 Series • These tunables offer the compactness of a 5 mm coil and the low drift reliability of an insert molded coil. • Inductance values from 9 to over 280 nH • Optional plated brass cans provide integral shielding • Can be ordered without cores for use as fixed inductors Designer’s Kit M305 contains 2 each of all parts Core material Aluminum, 0.187″ (4.75 mm) long. Terminations Leads: RoHS compliant tin-silver over copper. Other terminations available at additional cost. Shield can tabs: Tin-silver over nickel over brass Weight 164 series unshielded: 0.16 – 0.31 g; with shield can: 0.45 – 0.60 g 165 series unshielded: 0.15 – 0.25 g; with shield can: 0.43 – 0.54 g Ambient temperature –40°C to +85°C Storage temperature Component: –40°C to +85°C. Packaging: –40°C to +80°C Resistance to soldering heat: Wave solder only. Recommended maximum board surface temperature of 168°C (334°F) for no more than three seconds. Pre-heating is recommended to minimize time over the solder nozzle. Moisture Sensitivity Level (MSL) 1 (unlimited floor life at