C1061-AL

Document 444-1 PFC Coils For ON Semiconductor NCP1653 Power Factor Controller These coils were developed specifically for use with the ON Semiconductor NCP1653 Power Factor Controller (PFC) for driving continuous conduction mode step-up pre-converters. The C1061-A operates in 150 Watt applications. The C1062-B operates in 300 Watt applications and is specified by ON Semiconductor in application note AND8185/D. In addition to the standard parts shown, Coilcraft can design custom magnetics with inductance, DCR and current values to meet your specific requirements. For more information, contact Coilcraft. To request free evaluation samples of these coils, contact Coilcraft or visit www.coilcraft.com. Part number C1061-AL C1062-BL Application 150 W 300 W Inductance1 ±10% (µH) 450 570 Inductance at Ipk min (µH) 405 540 Ipk (A) 4.5 6.0 DCR max2 (Ohms) 0.166 0.226 SRF (MHz) 1.4 1.0 Irms3 (A) 3.80 3.55 1. Inductance measured at 100 kHz, 0.1 V, 0 Adc using an Agilent/ HP 4284A impedance analyzer. 2. DCR measured on Cambridge Technology micro-ohmmeter and Coilcraft CCF858 test fixture. 3. Average current for a 40°C rise above 25°C ambient. 4. Operating temperature range −40°C to +125°C. 5. Electrical specifications at 25°C. Typical Inductance vs Frequency 1000 800 600 C1062-BL C1061-AL Typical Inductance vs Current 1000 800 Inductance (µH) Inductance (µH) 600 500 400 300 200 C1062-BL C1061-AL 400 300 200 100 0.01 0.1 1 10 100 0.1 1 10 100 Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. Current (A) Document 444-1 Revised 01/05/09 © Coilcraft, Inc. 2009 Document 444-2 PFC Coils for ON Semiconductor NCP1653 Typical Temperature Rise vs Current 70 Temperature rise (from 25°C) 60 50 40 30 20 10 0 0 1 2 3 4 5 Current (A rms) C1061-AL 1 1.450 max 36,80 C1 06 2-B L C1 06 1AL C1062-BL 1 1.50 max 38,10 6 1.170 max 29,70 7 1.210 max 30,73 0.150 ±0.030 3,81 ±0,76 0.875 22,20 0.0346 ±0.0005 0,879 ±0,013 0.115 ±0.015 3,30 ±0,33 1.00 25,40 0.029 0,74 1.20 30,48 6 7 7 1.450 max 36,80 1.80 max 45,72 1 12 0.058 Ø 1,47 0.875 22,20 1 0.200 5,08 0.150 3,81 1 1 1.00 25,40 0.062 Ø 1,58 0.200 5,08 Recommended PC Layout Weight: 64.5 g Packaging: 75 per tray Weight: 105.7 g Packaging: 50 per tray Specifications subject to change without notice. Please check our website for latest information. Recommended PC Layout Document 444-2 Revised 01/05/09 © Coilcraft, Inc. 2009