GA3094-ALC

Document 625-1 High Current Air Core Inductors The use of heavy gauge wire allows these parts to have the lowest DCR and highest current ratings of our air-core inductors. They offer Q values over 100 from 100 MHz to 1 GHz. Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com. SRF DCR   Inductance2   Q2   typ3   max4   Irms5 Wt Part    number1 ±5% (nH) typ (GHz) (mOhm) (A) (mg) GA3092-AL_ 3.7 GA3093-AL_ 6.6 GA3094-AL_ 12.0 GA3095-AL_ 17.5 120 107 105 115 17.5 4.0 2.4 2.2 2.0 2.0 2.0 2.0 7.0 150 7.0 220 7.0 280 7.0 390 Terminations  RoHS compliant tin-silver (96.5/3.5) over copper Ambient temperature  –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature  Component: –40°C to +140°C. Packaging: –40°C to +80°C Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles 1. When ordering, please specify packaging code: Temperature Coefficient of Inductance (TCL)  +5 to +70 ppm/°C GA3095-ALC Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). Factory order only, not stocked. 2. L and Q measured at 150 MHz, 0.1 Vrms, 0 A using an Agilent/HP 4291A impedance analyzer with an Agilent/HP 16193A test fixture. 3. SRF measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture. 4. DCR measured using a micro-ohmmeter. 5. Current that causes a 15°C temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Moisture Sensitivity Level (MSL)  1 (unlimited floor life at