H7019-AL

Document 142-1 Common Mode Line Chokes High Inductance Series These common mode line chokes provide the best available combination of low cost and high inductance. Coilcraft EE style common mode line chokes are available in two series, each with a variety of current ratings, sizes and inductance values. The Coilcraft bobbin design provides a creepage and clearance spacer that makes these parts compatible with UL, VDE, and IEC specifications. • VDE, IEC, CSA compatible • Cost effective design • 3750 Vrms isolation between windings For free evaluation samples, contact Coilcraft or visit www.coilcraft.com. F55XX Series 1.2 max 30,5 0.600 ±0.010 15,24 ±0,25 2 5 1.35 max 34,29 0.875 ±0.015 22,23 ±0,38 2 11 5 8 0.150 ±0.03 3,81 ±0,76 Terminations: 0.031 –0.001 dia 0,79 +0,0508 –0,0254 +0.002 11 8 1.45 max 36,8 Tin-silver over tin over copper H70XX Series 1.3 max 33,0 0.900 ±0.010 22,86 ±0,25 2 5 1.65 max 41,9 1.00 ±0.015 25,4 ±0,38 2 11 5 8 0.150 ±0.03 3,81 ±0,76 Terminations: 0.053 ±0.002 1,35 ±0,05 dia 11 8 1.80 max 45,7 Tin-silver over tin over copper Specifications subject to change without notice. Please check our website for latest information. Document 142-1 Revised 02/14/06 © Coilcraft, Inc. 2006 Document 142-2 Common Mode Line Chokes–High Inductance Series F55XX Series Part number F5585-AL F5586-AL F5587-AL F5588-AL F5589-AL F5590-AL F5591-AL F5592-AL F5593-AL Inductance1 (mH) 82.0 34.0 25.3 15.8 8.20 6.55 3.45 1.75 1.20 Current (Amps) ¹/4 ³/4 1 1¹/4 1¹/2 2 2¹/2 3 4 SRF2 (kHz) 65 100 129 170 206 230 309 420 560 DCR3 (Ohms) 3.10 1.30 0.855 0.540 0.295 0.215 0.120 0.070 0.045 1. Inductance is minimum per winding, tested at 0.1 Vrms, 20 kHz. 2. SRF is minimum for each winding. 3. DCR is maximum per winding. 4. Operating temperature range –40°C to +85°C. 5. Electrical specifications at 25°C. H70XX Series Part number H7010-AL H7011-AL H7012-AL H7013-AL H7014-AL H7015-AL H7016-AL H7017-AL H7018-AL H7019-AL Inductance1 (mH) 56.5 34.8 23.6 19.8 7.38 5.36 4.10 2.09 0.966 0.753 Current (Amps) 1 1¹/4 1¹/2 2 2¹/2 3 4 5 6 8 SRF2 (kHz) 62 96 104 128 190 220 275 370 556 640 DCR3 (Ohms) 1.10 0.720 0.465 0.350 0.160 0.115 0.080 0.045 0.025 0.017 1. Inductance is minimum per winding, tested at 0.1 Vrms, 20 kHz. 2. SRF is minimum for each winding. 3. DCR is maximum per winding. 4. Operating temperature range –40°C to +85°C. 5. Electrical specifications at 25°C. Specifications subject to change without notice. Please check our website for latest information. Document 142-2 Revised 08/02/06 © Coilcraft, Inc. 2006