LPD3015-153MRC

Document 661-1 Shielded Coupled Inductors LPD3015 Halogen Free • Only 1.4 mm high and 3 mm square • Ideal for use in flyback, multi-output buck, SEPIC and Zeta applications. • High inductance, high efficiency and excellent current handling • Can also be used as two single inductors connected in series or parallel or as a common mode choke. AEC Q200 +85°C + + D L1 C L2 VOUT C VIN – SW – Typical Flyback Converter D L2 + VOUT C AUX – + + VIN 1 L1 4 D SW VOUT C – – Typical Buck Converter with auxiliary output L2 2 L1 3 D + L1 VIN C L2 Q – + C1 C – Typical SEPIC schematic + + – Dimensions are in L2 C1 Q VIN VOUT L1 C D Typical Zeta schematic C VOUT – inches mm Specificationssales@coilcraft.com subject to change without notice. US +1-847-639-6400 Please check our website for latest information. UK +44-1236-730595 sales@coilcraft-europe.com Taiwan +886-2-2264 3646 sales@coilcraft.com.tw China +86-21-6218 8074 sales@coilcraft.com.cn Singapore + 65-6484 8412 sales@coilcraft.com.sg Document 661-1  Revised 12/22/21 © © Coilcraft Coilcraft Inc. Inc. 2021 2021 This This product product may may not not be be used used in in medical medical or or high high risk applications without prior Coilcraft approval. risk applications without prior Coilcraft approval. Specification Specification subject subject to to change change without without notice. notice. Please Please check check web web site site for for latest latest information. information. Document 661-2 Coupled Inductors for SEPIC - LPD3015 Series   Isat (A)6      Irms (A) Coupling Leakage     2   3   4 5 Inductance DCR max SRF typ coefficient L typ 10% 20% 30% both one   Part number1   windings7   winding8 ±20% (µH) (Ohms) (MHz) typ (µH) drop drop drop Halogen Free AEC Q200 +85°C LPD3015-391MR_ LPD3015-561MR_ LPD3015-102MR_ LPD3015-152MR_ LPD3015-182MR_ 0.39 0.071 289 0.56 0.079 235 1.0 0.129 160 1.5 0.204 140 1.8 0.273 135 0.89 0.93 0.95 0.96 0.96 0.08 3.2 3.3 3.4 0.08 2.7 2.8 2.8 0.09 2.0 2.1 2.2 0.11 1.6 1.7 1.8 0.13 1.5 1.6 1.6 1.45 2.05 1.37 1.94 1.08 1.52 0.86 1.20 0.78 1.10 LPD3015-222MR_ 2.2 0.300 110 LPD3015-332MR_ 3.3 0.337 90 LPD3015-472MR_ 4.7 0.503 79 LPD3015-682MR_ 6.8 0.622 58 LPD3015-103MR_ 10 1.040 48 0.97 0.14 1.5 1.6 1.6 0.75 1.05 0.98 0.16 1.0 1.1 1.2 0.67 0.94 0.98 0.18 0.86 0.87 0.88 0.54 0.76 0.98 0.22 0.77 0.78 0.79 0.49 0.69 0.99 0.28 0.58 0.59 0.60 0.38 0.53 LPD3015-153MR_ 15 LPD3015-183MR_ 18 LPD3015-223MR_ 22 LPD3015-333MR_ 33 LPD3015-473MR_ 47 0.99 0.37 0.49 0.50 0.51 0.32 0.46 0.99 0.42 0.46 0.47 0.48 0.31 0.44 0.99 0.48 0.42 0.43 0.44 0.28 0.40 0.99 0.63 0.34 0.35 0.36 0.23 0.32 0.99 0.81 0.28 0.29 0.30 0.19 0.27 1.420 35 1.550 33 1.89 30 2.84 23 4.03 17 LPD3015-683MR_ 68 6.11 14 0.99 1.13 0.24 0.25 0.26 0.16 0.22 LPD3015-104MR_ 100 8.54 11 0.99 1.50 0.20 0.21 0.22 0.13 0.19 LPD3015-124MR_ 120 9.23 9.0 0.99 1.76 0.19 0.20 0.20 0.13 0.18 LPD3015-154MR_ 150 12.40 8.0 0.99 2.22 0.16 0.17 0.18 0.11 0.16 LPD3015-184MR_ 180 15.32 7.5 0.99 2.79 0.15 0.16 0.17 0.10 0.14 LPD3015-224MR_ 220 18.56 6.0 0.99 3.56 0.13 0.14 0.15 0.09 0.13 LPD3015-334MR_ 330 27.70 5.0 0.99 5.18 0.11 0.12 0.12 0.07 0.10 1. When ordering, please specify termination and packaging codes: Coupled Inductor Core and Winding Loss Calculator LPD3015-334MRC Termination: R = Matte tin over nickel over silver Special order, added cost: Q = RoHS tin-silver-copper (95.5/4/0.5) or P = non-RoHS tin-lead (63/37) Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). Quantities less than full reel available: in tape (not machine ready) or with leader and trailer ($25 charge). B = Less than full reel. In an effort to simplify our part numbering system, Coilcraft is eliminating the need for multiple packaging codes. When ordering, simply change the last letter of your part number from B to C. D = 13″ machine-ready reel. EIA-481 embossed plastic tape. Factory order only, not stocked (3500 parts per full reel). 2. Inductance shown for each winding, measured at 100 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. When leads are connected in parallel, inductance is the same value. When leads are connected in series, inductance is four times the value. 3. DCR is for each winding. When leads are connected in parallel, DCR is half the value. When leads are connected in series, DCR is twice the value. 4. SRF measured using an Agilent/HP 4191A or equivalent. When leads are connected in parallel, SRF is the same value. 5. Leakage Inductance is for L1 and is measured with L2 shorted 6. DC current at 25°C that causes the specified inductance drop from its value without current. It is the sum of the current flowing in both windings. 7. Equal current when applied to each winding simultaneously that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. 8. Maximum current when applied to one winding that causes a 40°C temperature rise from 25°C ambient. This information is for reference only and does not represent absolute maximum ratings. 9. Electrical specifications at 25°C. Refer to Doc 639 “Selecting Coupled Inductors for SEPIC Applications.” Refer to Doc 362 “Soldering Surface Mount Components” before soldering. This web-based utility allows you to enter frequency, peak-to-peak (ripple) current, and Irms current to predict temperature rise and overall losses, including core loss. Go to online calculator. Core material Ferrite Core and winding loss  Go to online calculator Weight  45 – 52 mg Terminations  RoHS compliant matte tin over nickel over silver. Other terminations available at additional cost. Ambient temperature  –40°C to +85°C with (40°C rise) Irms current. Maximum part temperature  +125°C (ambient + temp rise). Storage temperature  Component: –40°C to +125°C. Tape and reel packaging: –40°C to +80°C Winding to winding isolation  100 Vrms, one minute Resistance to soldering heat  Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL)  1 (unlimited floor life at