PCRJ454-2

Document 189-1 Filtered Modular Jacks - PCRJ Series This product is not RoHS-compliant. Contact Coilcraft for current status or possible alternatives. These filtered jacks virtually eliminate conducted and radiated noise in voice or data lines. And they suppress noise at the best possible spot for incoming and outgoing signals. Available in RJ-45, -14 and -11 versions, they use a single high impedance magnetic structure to filter multiple signal lines simultaneously, providing common mode noise reduction without affecting the desired signal — something ferrite beads or sleeves can’t achieve. The -1 series jacks reduce common mode noise by 45 dB at 100 MHz while passing signals up to 48 MHz without attenuation; the -2 versions provide 20 dB attenuation at 100 MHz and pass differential mode signals up to 140 MHz. The jacks come standard with a solderable shield and match standard industry footprints. Custom models are available to meet specific response characteristics. Specifications Number of Part Number of contacts number positions loaded PCRJ11-1 6 2 PCRJ14-1 6 4 PCRJ11-2 6 2 PCRJ14-2 6 4 PCRJ454-2 8 4 PCRJ458-1 8 8 PCRJ458-2 8 8 Current max (mA) Schematic 500 A 500 B 500 A 500 C 500 D 500 E 500 E PCRJ11 and 14 Board edge 0.626 15,90 0.91 23,11 Recommended Board Layout 0.690 17,53 0.555 14,10 0.088 2,235 0.193 4,90 0.66 16,76 0.86 21,84 0.58 14,73 1 3 0.05 1,27 0.03 dia 0,76 1. Operating temperature range -40°C to +85°C 2. Electrical specifications at 25°C 0.02 dia 0,51 0.115 2,92 0.012 × 0.065 0,30 × 1,65 0.075 dia 1,91 0.100 2,54 Schematics A Plug 2 3 terminals Plug 1 terminals PCRJ454 and 458 B 23 4 C Plug 1 2 3 4 terminals Board edge 0.710 17,81 0.91 23,11 Recommended Board Layout 0.690 17,53 0.555 14,10 1 0.075 dia 1,91 PCRJ pins 2 3 PCRJ pins 1 23 4 PCRJ pins 1 2 3 4 0.088 2,235 0.130 3,30 0.66 16,76 D Plug 3 4 5 6 terminals E Plug 1 2 3 4 5 6 7 8 terminals 0.86 21,84 0.66 16,76 7 0.05 1,27 0.180 4,57 0.100 2,54 0.10 2,54 PCRJ pins 3 4 5 6 PCRJ pins 1 2 3 4 5 6 7 8 0.115 2,92 0.02 dia 0,51 0.012 × 0.065 0,30 × 1,65 0.03 dia 0,76 Specifications subject to change without notice. Please check our website for latest information. Document 189-1 Revised 04/07/09 © Coilcraft, Inc. 2009 Document 189-2 -1 Series Performance Typical Attenuation* 0 Typical Impedance vs Frequency 10 Differential Mode 10 8 Impedance (kOhms) Attenuation (dB) 20 6 Common Mode 30 4 40 2 50 0.1 1 10 100 1000 0 0.1 1 10 100 1000 Frequency (MHz) Frequency (MHz) -2 Series Performance Typical Attenuation* 0 Typical Impedance vs Frequency 2.0 Differential Mode 10 1.6 20 Impedance (kOhms) 10 100 1000 Common Mode Attenuation (dB) 1.2 30 .8 40 .4 50 0.1 1 0 0.1 1 10 100 1000 Frequency (MHz) *measured on Agilent/HP8753D network analyzer. Ref: 50 Ohms. Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. Document 189-2 Revised 04/07/09 © Coilcraft, Inc. 2009