PL140-104L

Document 417-1 SMT Planar Transformers For Applications up to 140 Watts The PL140 surface mount planar transformers are rated for 140 Watts and are designed to operate between 200 kHz and 500 kHz. They are available in 15 turns ratios and six different schematics, and may be special ordered with an auxiliary winding. These transformers are ideal for use in high-current power supply applications such as open loop intermediate bus converters (IBC) and closed loop voltage mode converters. They are designed for use with nominal −48 V input. Output voltages depend on the turns ratio, duty cycle and circuit topology. They offer high efficiency and feature excellent DCR, very low leakage inductance and 1500 Vdc primary to secondary isolation. Coilcraft can custom design planar transformers with different turns ratios to meet your specific requirements. Coilcraft Designer’s Kit C390 contains two samples each of the parts shown in bold. To order, contact Coilcraft, or visit http://order.coilcraft.com to purchase on-line. Primary Primary Leakage turns Part inductance2 inductance3 number1 N1 N2 Schem. min (µH) max (µH) PL140-100L_ 4 4 A 120 0.35 PL140-101L_ 9 – B 152 0.35 PL140-102L_ 5 5 A 188 0.35 PL140-103L_ 11 – B 227 0.35 PL140-104L_ 6 6 A 270 0.45 PL140-105L_ 4 4 C 120 0.35 PL140-106L_ 9 – D 152 0.35 PL140-107L_ 5 5 C 188 0.35 PL140-108L_ 11 – D 227 0.50 PL140-109L_ 6 6 C 270 0.60 PL140-110L_ 4 4 E 120 0.35 PL140-111L_ 9 – F 152 0.35 PL140-112L_ 5 5 E 188 0.35 PL140-113L_ 11 – F 227 0.35 PL140-114L_ 6 6 E 270 0.45 1. When ordering, please specify termination and packaging codes: PL140-114LD Termination: L = RoHS compliant matte tin over nickel over brass. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: D = 13″ machine-ready reel. EIA-481 embossed plastic tape (200 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter D instead. Inductance measured on an Agilent/HP 4284 between pins 2 and 4 at 200 kHz, 0.1 Vrms, 0 Adc. Leakage inductance measured between pins 2 and 4 at 100 kHz, 0.1 Vrms, 0 Adc with all secondary pins shorted. Storage and ambient operating temperature range: –40°C to +85°C. Electrical specifications at 25°C. DCR max (mOhms) Primary Secondary 12.0 (2-3), 12.0 (3-4) 4.0 (6-10) 32.8 (2-4) 4.0 (6-10) 20.8 (2-3), 20.8 (3-4) 4.0 (6-10) 48.8 (2-4) 4.0 (6-10) 28.0 (2-3), 28.0 (3-4) 4.0 (6-10) 12.0 (2-3), 12.0 (3-4) 0.5 (6-7), 0.5 (9-10) 32.8 (2-4) 0.5 (6-7), 0.5 (9-10) 20.8 (2-3), 20.8 (3-4) 0.5 (6-7), 0.5 (9-10) 48.8 (2-4) 0.5 (6-7), 0.5 (9-10) 28.0 (2-3), 28.0 (3-4) 0.5 (6-7), 0.5 (9-10) 12.0 (2-3), 12.0 (3-4) 1.0 (6-8), 1.0 (9-10) 32.8 (2-4) 1.0 (6-8), 1.0 (9-10) 20.8 (2-3), 20.8 (3-4) 1.0 (6-8), 1.0 (9-10) 48.8 (2-4) 1.0 (6-8), 1.0 (9-10) 28.0 (2-3), 28.0 (3-4) 1.0 (6-8), 1.0 (9-10) Schematics 2 6 N1 3 1T 7 A N2 4 1T 8 1T 1 5 2 Aux (opt) 9 1T 10 6 1T N1 7 B 1T 4 8 1T 1 5 2 Aux (opt) 9 1T 10 N1 6 C 3 1T 7 9 N2 4 1 5 2 Aux (opt) 1T 10 6 N1 1T 7 D 4 1 5 2 9 Aux (opt) 1T 10 6 N1 1T 7 E 3 N2 4 1 5 2 1T 8 9 2. 3. 4. 5. Aux (opt) 1T 10 6 1T F Specifications subject to change without notice. Please check our website for latest information. N1 1T 4 1 5 7 8 9 Aux (opt) 1T 10 Document 417-1 Revised 02/10/05 © Coilcraft, Inc. 2007 Document 417-2 PL140 Series SMT Planar Transformers Dimensions Dot indicates pin 1 0.095 2,41 0.800 20,32 10 1 2 3 4 5 9 8 7 6 0.125 3,18 10 0.810 max 3 20,57 2 4 9 8 7 6 0.080 Ø 2,03 0.920 max 23,37 Recommended Land Pattern Ø 0.110 2,79 0.360 max 9,14 0.006 /0,15 Weight: 10.9 – 12 g Terminations: Matte tin over nickel over brass Tape and reel: 200/13″ reel 44 mm tape width For packaging data see Tape and Reel Specifications section. Note: Pad for pin 3 not necessary for schematics B, D and F. Pad for pin 8 is not necessary for schematics C and D. Pads 1 and 5 are only needed for optional auxiliary winding. Specifications subject to change without notice. Please check our website for latest information. Document 417-2 Revised 02/10/05 © Coilcraft, Inc. 2007