S3LP157L

Document 124-1 Surface Mount LC Filters These space saving low and high pass filters are pretuned, tight tolerance modules which serve a wide variety of filtering requirements. They feature 3rd order Butterworth alignment, less than 0.3 dB insertion loss and a compact, 1812-size construction ideally suited for auto insertion and reflow soldering. • 3rd order Butterworth alignment • 50 Ohm characteristic impedance • Less than 0.3 dB insertion loss Coilcraft Designer’s Kit D302 contains samples of all low pass filters. To order, contact Coilcraft or visit http://order.coilcraft.com. Part marking 0.205 max 5,21 0.085 max 2,16 Low Pass Filters Part number1 S3LP156L_ S3LP306L_ S3LP606L_ S3LP157L_ S3LP307L_ S3LP507L_ S3LP707L_ S3LP807L_ S3LP907L_ S3LP108L_ S3LP128L_ S3LP158L_ S3LP188L_ S3LP218L_ -3 dB Cutoff 15 MHz 30 MHz 60 MHz 150 MHz 300 MHz 500 MHz 700 MHz 800 MHz 900 MHz 1.0 GHz 1.2 1.5 1.8 2.1 GHz GHz GHz GHz Irms (mA)2 200 300 300 400 400 500 500 500 500 500 500 500 500 500 0.020 0,51 0.125 3,18 0.180 4,57 0.120 3,05 0.040 1,02 2nd digit 1st digit (over P1) Multiplier (×10) (over P3) (over P2) 0.055 1,40 P1 P3 0.040 1,02 0.160 max 4,06 0.045 1,14 P2 0.050 1,27 0.070 1,78 Recommended Land Pattern Weight: 64.7 – 69.0 mg Tape and reel: 600/7″ reel; 2200/13″ reel 12 mm tape width See Tape and Reel Specifications section for packaging data. See Color Coding section for part marking data. 1. When ordering, please specify termination and packaging codes: S3HP156LC Termination: L = RoHS compliant silver over copper or gold over nickel over silver. Special order: T = RoHS tin-silver-copper (95.5/4/0.5) or S = non-RoHS tin-lead (63/37). Packaging: C = 7″ machine-ready reel. EIA-481 embossed plastic tape (600 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D = 13″ machine-ready reel. EIA-481 embossed plastic tape (2200 parts per full reel). High Pass Filters Part number1 S3HP156L_ S3HP306L_ S3HP606L_ S3HP157L_ S3HP307L_ S3HP507L_ S3HP807L_ -3 dB Cutoff 15 MHz 30 MHz 60 MHz 150 MHz 300 MHz 500 MHz 800 MHz Irms (mA)2 300 300 300 300 300 500 500 2. Current that causes a 15°C rise from 25°C ambient. 3. Operating temperature range -40°C to +85°C. 4. Electrical specifications at 25°C. Specifications subject to change without notice. Please check our website for latest information. Document 124-1 Revised 11/16/06 © Coilcraft, Inc. 2008 Document 124-2 Surface Mount LC Filters In P1 P2 P2 Low pass Out P3 High pass In P1 Out P3 Frequency Response—Low Pass Filters* 0 0 S3LP-156 20 S3LP-306 S3LP-606 40 dB Attenuation (re: 50 ) dB Attenuation (re: 50 ) S3LP-157 10 S3LP-507 S3LP-307 S3LP-807 20 60 30 80 10 100 1000 40 100 1000 10000 Frequency (MHz) Frequency (MHz) 0 0 S3LP-707 dB Attenuation (re: 50 ) dB Attenuation (re: 50 ) S3LP-188 10 10 S3LP-218 S3LP-907 S3LP-128 20 20 S3LP-158 30 30 40 100 1000 10000 40 100 1000 10000 Frequency (MHz) Frequency (MHz) Frequency Response—High Pass Filters* 0 0 S3HP-606 20 S3HP-156 40 S3HP-306 dB Attenuation (re: 50 ) dB Attenuation (re: 50 ) S3HP-307 10 S3HP-157 20 S3HP-807 S3HP-507 60 30 80 1 10 100 40 10 100 1000 Frequency (MHz) Frequency (MHz) *Measured on Agilent/HP 8753D network analyzer Specifications subject to change without notice. Please check our website for latest information. Document 124-2 Revised 11/16/06 © Coilcraft, Inc. 2008