SER2814H-103KL

Document 490-1 SMT Power Inductors - SER2800 Series • Perfect for high current, low voltage power supply applications • Extremely low DCR; Current handling to >100 Amps • Higher inductance values than other SER series – up to 33 µH Core material Ferrite Core and winding loss See www.coilcraft.com/coreloss Terminations RoHS compliant tin-silver over copper. Other terminations available at additional cost. Weight SER2814L – 27.5 g; SER2814H – 28.7 g; SER2817H – 34.7 g Ambient temperature –40°C to +85°C with Irms current, +85°C to +125°C with derated current Storage temperature Component: –40°C to +125°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at 100 >100 20 30 >100 >100 20 30 84.0 84.8 20 30 92.5 93.6 20 28 66.9 68.4 20 30 54.0 57.0 20 30 61.2 62.4 20 28 48.0 50.1 20 30 36.9 39.0 20 30 45.0 45.9 20 28 34.5 36.2 20 30 26.0 27.8 20 30 31.2 32.1 20 28 21.5 23.4 20 30 16.2 17.6 20 30 21.2 21.9 20 28 14.0 15.2 20 30 9.8 11.0 20 30 14.0 15.0 20 28 8.6 9.6 20 30 6.0 6.8 20 30 8.7 9.6 20 28 5.1 5.9 20 30 2.6 3.3 20 30 1. Inductance measured at 500 kHz, 0.1 Vrms, 0 Adc on an Agilent/HP 4284A LCR meter or equivalent. 2. DCR measured on a Keithley 580 microohmmeter or equivalent. 3. SRF measured using an Agilent/HP 8753D network analyzer and a Coilcraft SMD-D test fixture. 4. DC current at which the inductance drops the specified amount from its value without current. 5. Current that causes a the specified temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Caution: This series is not intended for use in high vibration or mechanical shock environments. We advise using additional means of securing the part to the circuit board to ensure its adhesion. Consider our SER2900 series, which offers nearly identical electrical characteristics and incorporates a third mount pad for better stability and board adhesion. Specifications subject to change without notice. Please check our website for latest information. Document 490-1 Revised 08/22/08 © Coilcraft, Inc. 2008 Document 490-2 SMT Power Inductors - SER2800 Series 1.10 max 27,9 Recommended Land Pattern 1.100 max 27,94 SER28XXX COILCRAFT XX 0.76 max 19,3 0.455 11,56 0.220 5,59 C L 0.160 4,06 0.240 6,10 0.210 5,33 0.190 4,83 Height (See table) 0.004/0,102 Maximum height SER2814L 0.560 / 14,22 SER2814H 0.560 / 14,22 0.655 / 16,64 SER2817H 0.150 3,8 0.270 6,9 Temperature Rise vs Current 80 Current Derating 120 110 100 Temperature rise (from 25°C) 70 Percent of rated current 60 50 40 30 20 10 0 0 10 20 30 40 50 60 90 80 70 60 50 40 20 10 0 -40 -20 30 Isat Irms 0 20 25°C 40 60 80 100 120 140 Current (A rms) Ambient temperature (°C) Specifications subject to change without notice. Please check our website for latest information. Document 490-2 Revised 10/20/08 © Coilcraft, Inc. 2008 Document 490-3 SMT Power Inductors - SER2800 Series L vs Current 100 33 µH L vs Frequency 100 33 µH Inductance (µH) Inductance (µH) 22 µH 15 µH 22 µH 15 µH 10 10 µH 6.8 µH 4.7 µH 3.3 µH 2.2 µH 10 10 µH 6.8 µH 4.7 µH 3.3 µH 2.2 µH 1.5 µH 1 SER2814L 0.1 1 1.5 µH SER2814L 1 10 100 0.1 1 10 100 Current (A) Frequency (MHz) 100 100 33 µH 33 µH Inductance (µH) Inductance (µH) 22 µH 15 µH 22 µH 10 15 µH 10 µH 6.8 µH 10 10 µH 6.8 µH 4.7 µH 3.3 µH 2.2 µH 1 4.7 µH 3.3 µH 2.2 µH 1 SER2814H 0.1 0.1 SER2814H 0.1 1 10 100 1 10 100 Current (A) Frequency (MHz) 100 100 33 µH 33 µH Inductance (µH) 22 µH 15 µH Inductance (µH) 22 µH 10 15 µH 10 µH 6.8 µH 4.7 µH 3.3 µH 10 10 µH 6.8 µH 4.7 µH 3.3 µH 1 1 SER2817H 0.1 1 10 100 0.1 SER2817H 0.1 1 10 100 Current (A) Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. Document 490-3 Revised 10/20/08 © Coilcraft, Inc. 2008 Document 490-4 SMT Power Inductors - SER2800 Series ESR vs Frequency 2000 SER2814L Equivalent Series Resistance (Ohms) 1750 1500 1250 1000 750 500 250 0 0.1 1 10 100 33 µH 22 15 µH µH 10 µH Frequency (MHz) Equivalent Series Resistance (Ohms) SER2814H 1750 1500 1250 1000 750 500 250 0 0.1 1 33 µH 22 µH 2000 15 µH 10 µH 10 6.8 µH 4.7 µH 3.3 µ 2.2 H µH Frequency (MHz) Equivalent Series Resistance (Ohms) SER2817H 1500 1250 1000 750 500 250 0 0.1 1 22 µH 1750 10 15 µH 10 µ H 6.8 µ H 3.3 µH 4.7 µH 33 µH 2000 Frequency (MHz) Specifications subject to change without notice. Please check our website for latest information. Document 490-4 6.8 4.7 µH 3.3 µH 2.2 µH µH 1.5 µH 100 100 Revised 10/20/08 © Coilcraft, Inc. 2008