1N4002-G

General Purpose Rectifier 1N4001-G thru 1N4007-G Current: 1.0A Voltage: 50 ~ 1000V Features Low forward voltage drop High current capability Low reverse leakage current High surge current capability DO-41 .034(.86) .028(.71) 1.0(25.4) MIN. DIA. Mechanical Data Case: Molded plastic A-405 Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.22 gram .205(5.2) .160(4.1) .107(2.7) .080(2.0) 1.0(25.4) MIN. DIA. Dimensions in inches and (millimeters) Maximum Rating and Electrical Characteristics Rating at 25 C ambient temperature unless otherwise specified. 1N 1N 1N 1N 1N 1N 1N SYMBOL 4001-G 4002-G 4003-G 4004-G 4005-G 4006-G 4007-G UNIT Maximum repetitive peak reverse voltage Maximum RMS voltage Maximum DC blocking voltage Maximum average forward rectified current TL = 55°C Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Maximum instantaneous forward voltage @ 1.0A Maximum DC reverse current @ TJ= 25°C At Rated DC blocking voltage @ TJ= 125°C Typical junction capacitance (Note 1) Typical thermal resistance (Note 2) Operating junction and storage temperature Range VRRM VRMS VDC IF (AV) 50 35 50 100 70 100 200 140 200 400 280 400 1.0 600 420 600 800 560 800 1000 700 1000 V V V A IFSM 30 1.1 5.0 250 10 45 -55 to +125 A V uA pF VF IR CJ R JA ºC/W o TJ,TSTG C NOTES : (1) Thermal resistance junction to lead. (2) Measured at 1.0MHz and applied reverse voltage of 4.0 Volts DC. “-G” suffix designates RoHS compliant Version General Purpose Rectifier Ratings and Characteristic Curves 1N4001S-G thru 1N4007S-G FIG.1 - FORWARD CURRENT DERATING CURVE 1.0 30 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 0.8 25 20 0.6 15 0.4 10 0.2 60 Hz Resistive or Inductive load 0 0 50 100 o 5 0 150 1 10 100 LEAD TEMPERATURE, C NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=100 C o 10 1.0 1 0.1 0.1 TJ=25 C o 0.01 0.2 0.4 0.6 0.8 TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 1.0 1.2 1.4 1.6 o 0.01 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p o 10 1 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS