1N4005G

Glass Passivated Standard Rectifier 1N4001G THRU 1N4007G Current: 1A Votlage: 50 ~ 1000V Features Low forward voltage drop High current capability Low reverse leakage current High Surge current capability 1.0(25.4) MIN. DO-41 .034(.86) .028(.71) DIA. .205(5.2) .160(4.1) .107(2.7) .080(2.0) 1.0(25.4) MIN. DIA. Mechanical Data Case: Molded plastic DO-41 Epoxy: UL 94-0 rate flame retardant Terminal: Solderable per MIL-STD-202 method 208 guaranteed Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.34 gram Dimensions in inches and (millimeters) Maximum Rating and Electrical Characteristics Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. 1N SYMBOL 4001G Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current TL=55 C Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 1.0 A Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C Typical junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Junction and Storage Temperature Range o o o 1N 4002G 100 70 100 1N 4003G 200 140 200 1N 4004G 400 280 400 1.0 1N 4005G 600 420 600 1N 4006G 800 560 800 1N 4007G UNIT 1000 700 1000 V V V A VRRM VRMS VDC I(AV) 50 35 50 IFSM 30 A VF 1.1 5.0 100 10 45 -55 to +150 o V uA uA pF C/W o IR CJ R JA TJ,TSTG C NOTES : (1) Thermal Resistance junction to lead. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. “-G” suffix designates RoHS compliant Version Glass Passivated Standard Rectifier Rating and Characteristic Curves 1N4001G THRU 1N4007G FIG.1 - FORWARD CURRENT DERATING CURVE 1.0 30 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT PEAK FORWARD SURGE CURRENT, AMPERES Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 0.8 25 20 0.6 15 0.4 10 0.2 60 Hz Resistive or Inductive load 0 0 50 100 o 5 0 150 1 10 100 LEAD TEMPERATURE, C NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=125 C o 10 1.0 1 0.1 0.1 TJ=25 C o 0.01 0.2 0.4 0.6 0.8 TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 1.0 1.2 1.4 1.6 o 0.01 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 100 JUNCTION CAPACITANCE, pF TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p o 10 1 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS “-G” suffix designates RoHS compliant Version