3.0SMCJ85A-HF

SMD Transient Voltage Suppressor 3.0SMCJ5.0(C)A-HF Thru. 3.0SMCJ170(C)A-HF Working Peak Reverse Voltage: 5.0 to 170 V Power Dissipation: 3000 W RoHS Device Halogen Free Features - For surface mounted applications in order to optimize board space. SMC/DO-214AB - Low profile package. 0.276(7.00) 0.256(6.50) - Built-in strain relief. - Glass passivated chip junction. - 3000W peak pulse power capability at 10x1000µs waveform, repetition rate (duty cycles): 0.01%. 0.128(3.25) 0.108(2.75) 0.244(6.20) 0.220(5.60) - Excellent clamping capability. 0.315(8.00) 0.299(7.60) - Low incremental surge resistance. 0.012(0.31) 0.006(0.15) - Matte tin lead-free plated. 0.094(2.39) 0.079(2.00) Mechanical Data 0.063(1.60) 0.035(0.90) - Case: SMC molded plastic. - Terminals: Solderable per MIL-STD-750, method 2026. 0.008(0.21) 0.002(0.05) Dimensions in inches and (millimeter) Circuit Diagram Bi-directional Uni-directional Maximum Ratings and Electrical Characteristics (TA = 25°C unless otherwise noted) Symbol Value Units Peak pulse power dissipation at TA = 25°C by 10 x 1000µs waveform (Fig.1) (Note 1, 2) PPPM 3000 W Power dissipation on infinite heat sink at TA = 50°C PM(AV) 6.5 W IFSM 300 A VF 3.5 V TJ, TSTG -65 to +150 °C Typical thermal resistance junction to lead RθJL 15 °C/W Typical thermal resistance junction to ambient RθJA 75 °C/W Characteristics Peak forward surge current, 8.3ms single half sine wave (Note 3) Maximum instantaneous forward voltage at 100A for unidirectional only Operating junction and storage temperature range Notes: 1. Non-repetitive current pulse. per Fig 3 and derated avove Ta= 25°C per Fig. 2. 2. Mounted on copper pad area of 0.31 x 0.31" (8.0 x 8.0mm) to each terminal. 3. Mounted on 8.3ms single half sine wave or equivalent square wave for unidirectional device only, duty cycle = 4 per minute maximum. Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 1 QW-JTV24 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Electrical Characteristics (3.0SMCJ5.0(C)A-HF Thru. 3.0SMCJ170(C)A-HF) Part No. Reverse stand-off voltage Breakdown voltage VBR @ IT Test current Max. clamp voltage VC @ IPP Max. peak pulse current Max. reverse leakage Device Marking IR @ VR Code VRWM (V) Min (V) Max (V) IT (mA) (V) IPP (A) (µA) UNI BI 3.0SMCJ5.0(C)A-HF 3.0SMCJ6.0(C)A-HF 3.0SMCJ6.5(C)A-HF 3.0SMCJ7.0(C)A-HF 5.0 6.0 6.5 7.0 6.40 6.67 7.22 7.78 7.00 7.37 7.98 8.60 10 10 10 10 9.2 10.3 11.2 12.0 326.1 291.3 267.9 250.0 800 800 500 200 RDE RDG RDK PDM DDE DDG DDK DDM 3.0SMCJ7.5(C)A-HF 3.0SMCJ8.0(C)A-HF 3.0SMCJ8.5(C)A-HF 3.0SMCJ9.0(C)A-HF 7.5 8.0 8.5 9.0 8.33 8.89 9.44 10.00 9.21 9.83 10.40 11.10 1 1 1 1 12.9 13.6 14.4 15.4 232.6 220.6 208.3 194.8 100 50 20 10 PDP PDR PDT PDV DDP DDR DDT DDV 3.0SMCJ10(C)A-HF 3.0SMCJ11(C)A-HF 3.0SMCJ12(C)A-HF 3.0SMCJ13(C)A-HF 10.0 11.0 12.0 13.0 11.10 12.20 13.30 14.40 12.30 13.50 14.70 15.90 1 1 1 1 17.0 18.2 19.9 21.5 176.5 164.8 150.8 139.5 5 2 2 2 PDX PDZ PEE PEG DDX DDZ DEE DEG 3.0SMCJ14(C)A-HF 3.0SMCJ15(C)A-HF 3.0SMCJ16(C)A-HF 3.0SMCJ17(C)A-HF 14.0 15.0 16.0 17.0 15.60 16.70 17.80 18.90 17.20 18.50 19.70 20.90 1 1 1 1 23.2 24.4 26.0 27.6 129.3 123.0 115.4 108.7 2 2 2 2 PEK PEM PEP PER DEK DEM DEP DER 3.0SMCJ18(C)A-HF 3.0SMCJ20(C)A-HF 3.0SMCJ22(C)A-HF 3.0SMCJ24(C)A-HF 18.0 20.0 22.0 24.0 20.00 22.20 24.40 26.70 22.10 24.50 26.90 29.50 1 1 1 1 29.2 32.4 35.5 38.9 102.7 92.6 84.5 77.1 2 2 2 2 PET PEV PEX PEZ DET DEV DEX DEZ 3.0SMCJ26(C)A-HF 3.0SMCJ28(C)A-HF 3.0SMCJ30(C)A-HF 3.0SMCJ33(C)A-HF 26.0 28.0 30.0 33.0 28.90 31.10 33.30 36.70 31.90 34.40 36.80 40.60 1 1 1 1 42.1 45.4 48.4 53.3 71.3 66.1 62.0 56.3 2 2 2 2 PFE PFG PFK PFM DFE DFG DFK DFM 3.0SMCJ36(C)A-HF 3.0SMCJ40(C)A-HF 3.0SMCJ43(C)A-HF 3.0SMCJ45(C)A-HF 36.0 40.0 43.0 45.0 40.00 44.40 47.80 50.00 44.20 49.10 52.80 55.30 1 1 1 1 58.1 64.5 69.4 72.7 51.6 46.5 43.2 41.3 2 2 2 2 PFP PFR PFT PFV DFP DFR DFT DFV 3.0SMCJ48(C)A-HF 3.0SMCJ51(C)A-HF 3.0SMCJ54(C)A-HF 3.0SMCJ58(C)A-HF 48.0 51.0 54.0 58.0 53.30 56.70 60.00 64.40 58.90 62.70 66.30 71.20 1 1 1 1 77.4 82.4 87.1 93.6 38.8 36.4 34.4 32.1 2 2 2 2 PFX PFZ RGE PGG DFX DFZ DGE DGG 3.0SMCJ60(C)A-HF 3.0SMCJ64(C)A-HF 3.0SMCJ70(C)A-HF 3.0SMCJ75(C)A-HF 60.0 64.0 70.0 75.0 66.70 71.10 77.80 83.30 73.70 78.60 86.00 92.10 1 1 1 1 96.8 103.0 113.0 121.0 31.0 29.1 26.5 24.8 2 2 2 2 PGK PGM PGP PGR DGK DGM DGP DGR 3.0SMCJ78(C)A-HF 3.0SMCJ85(C)A-HF 3.0SMCJ90(C)A-HF 3.0SMCJ100(C)A-HF 78.0 85.0 90.0 100 86.70 94.40 100 111 95.80 104 111 123 1 1 1 1 126.0 137.0 146.0 162.0 23.8 21.9 20.5 18.5 2 2 2 2 PGT PGV PGX PGZ DGT DGV DGX DGZ 3.0SMCJ110(C)A-HF 3.0SMCJ120(C)A-HF 3.0SMCJ130(C)A-HF 3.0SMCJ150(C)A-HF 110 120 130 150 122 133 144 167 135 147 159 185 1 1 1 1 177.0 193.0 209.0 243.0 16.9 15.5 14.4 12.3 2 2 2 2 PHE PHG PHK PHM DHE DHG DHK DHM 3.0SMCJ160(C)A-HF 3.0SMCJ170(C)A-HF 160 170 178 189 197 209 1 1 259.0 275.0 11.6 10.9 2 2 PHP PHR DHP DHR Note: For Bi-directional devices, use suffix CA. Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 2 QW-JTV24 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Rating and Characteristic Curves (3.0SMCJ5.0(C)A-HF Thru. 3.0SMCJ170(C)A-HF) Peak Pulse Forward, PPPM (kW) 1000 Non-repetitive pulse waveform shown in Figure.3 TA=25°C 100 10 0.31x0.31" (80x80mm) Copper pad area 1.0 0.1 1 10 100 1000 10000 100 80 60 40 20 0 0 25 50 75 100 125 150 Ambient Temperature, TA (°C) Fig.3 - Pulse Waveform Fig.4 - Typical Junction Capacitance 100000 tr=10µsec 100 Peak value IPPM TA=25°C Pulse width (td) is defined as the point where the peak. Current decayst to 50% of IPP 10000 Bi-directional V = 0V 60 CJ, (pF) 80 Half Value - Ipp/2 40 Uni-directional @ VR 100 10 20 0 Uni-directional V = 0V 1000 10/1000μsec Waveform as defined by R.E.A. 0 1.0 2.0 3.0 1 4.0 Bi-directional @ VR 1 10 100 1000 Time, T (ms) Reverse Breakdown Voltage, VBR (V) Fig.5 - Steady State Power Derating Curve Fig.6 - Maximum Non-Repetitive Peak Forward Surge Current 360 7 Peak Forward Surge Current, IFSM (A) Peak Pulse Current, IPPM (%) 120 Pulse Width, td (µs) 120 Steady State Power Dissipation, PM(AV) (W) Fig.2 - Forward Current Derating Curve Peak Pulse Power (PPP) or Current (IPP) Derating Percentage, (%) Fig.1 - Peak Pulse Power Rating Curve 6 5 4 3 2 1 0 0 25 50 75 100 125 150 300 240 180 120 60 0 TJ = TJmax 8.3ms single half sine wave (JEDEC Method) 1 Ambient Temperature, TA (°C) 10 100 Number of Cycles at 60Hz Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 3 QW-JTV24 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Reel Taping Specification d P0 T P1 E Index hole F B W C P A 12 o 0 D1 D2 D W1 Trailer Device ....... ....... End ....... ....... Leader ....... ....... ....... ....... 160mm (min) Start 400mm (min) Direction of Feed DO-214AB (SMC) SYMBOL A B C d D D1 D2 (mm) 6.22 ± 0.10 8.31 ± 0.10 2.49 ± 0.10 1.55 ± 0.05 330 ± 2.00 100.00 ± 1.00 13.00 ± 0.20 (inch) DO-214AB (SMC) 0.245 ± 0.004 0.327 ± 0.004 0.098 ± 0.004 0.061 ± 0.002 12.992 ± 0.079 3.937 ± 0.039 0.512 ± 0.008 SYMBOL E F P P0 P1 T W W1 (mm) 1.75 ± 0.10 7.50 ± 0.10 8.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 0.28 ± 0.02 16.00 ± 0.30 21.00 + 2.00 − 1.00 0.011 ± 0.001 0.630 ± 0.012 0.827 + 0.079 − 0.039 (inch) 0.069 ± 0.004 0.295 ± 0.004 0.315 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 4 QW-JTV24 Comchip Technology CO., LTD. SMD Transient Voltage Suppressor Marking Code Part Number Marking Code 3.0SMCJ-HF Series See Page.2 XXX Product type marking code Cathode band xxx = Marking code (see Page.2) Suggested P.C.B. PAD Layout D DO-214AB (SMC) SIZE A (mm) (inch) A 3.80 0.150 B 4.10 0.161 C 4.30 0.169 D 12.00 0.472 C B Note: 1. The pad layout is for reference purpose only. Standard Packaging REEL PACK Case Type DO-214AB (SMC) REEL Reel Size ( pcs ) (inch) 3,000 13 Company reserves the right to improve product design , functions and reliability without notice. REV:C Page 5 QW-JTV24 Comchip Technology CO., LTD.