6A4-G

General Purpose Rectifiers 6A05-G THRU 6A10-G (RoHS Device) Voltage Range 50 to 1000 V Current 6.0 Ampere Features Low forward voltage drop High current capability Low reverse leakage current High surge current capability Mechanical Data Case: Molded plastic P600 Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 guaranteed Polarity:Color band denotes cathode end Mounting position: Any Weight: 2.1 gram P600 .052(1.3) .048(1.2) 1.0(25.4) MIN. DIA. .360(9.1) .340(8.6) .360(9.1) .340(8.6) 1.0(25.4) MIN. DIA. Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL 6A05 Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current TL=50 C Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 6.0 A Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=100 C Typical junction Capacitance (Note 1) Typical Thermal Resistance (Note 2) Operating Junction and Storage Temperature Range o o 6A1-G 100 70 100 6A2-G 200 140 200 6A4-G 400 280 400 6.0 6A6-G 600 420 600 6A8-G 6A10-G UNIT 800 560 800 1000 700 1000 V V V A VRRM VRMS VDC I(AV) 50 35 50 IFSM 250 A VF 1.1 5.0 500 100 100 -55 to +125 o V uA uA pF C/W o IR CJ R JA TJ,TSTG C NOTES : (1) Thermal Resistance junction to lead. (2) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. Comchip Technology Corporation Tel: 510-657-8671 Fax: 510-657-8921 www.comchiptech.com General Purpose Rectifiers RATINGS AND CHARACTERISTIC CURVES 6A05-G THRU 6A10-G FIG.1 - FORWARD CURRENT DERATING CURVE 6.0 FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 250 5.0 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 200 4.0 150 3.0 100 2.0 1.0 60 Hz Resistive or Inductive load 0 0 50 100 o 50 0 150 1 10 100 LEAD TEMPERATURE, C NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES TJ=125 C 10 o 1.0 1 0.1 TJ=25 C 0.1 o 0.01 0.2 0.4 0.6 0.8 TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 1.0 1.2 1.4 1.6 o 0.01 0 20 40 60 80 100 INSTANTANEOUS FORWARD VOLTAGE, VOLTS PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE, pF TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p o 100 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS Comchip Technology Corporation Tel: 510-657-8671 Fax: 510-657-8921 www.comchiptech.com