A5KP33A-G

5000W Transient Voltage Suppressor A5KP-G Series Breakdown Voltage: 6.8 to 440 Volts Peak Pulse Power: 5000 Watts RoHS Device R-6 Features - Glass passivated chip. 0.052(1.32) DIA. 0.048(1.22) - 5000W peak pulse power capability with a 10/1000µs waveform, repetitive rate (duty cycle):0.01% 1.0(25.4) MIN. - Low leakage. - Uni and Bidirectional unit. - Excellent clamping capability. - Very fast response time. 0.360(9.14) 0.340(8.64) - Comply with AEC-Q101 - UL recognized file # E349157 - Range: A5KP5.0(C)A thru. A5KP190(C)A R 0.360(9.14) DIA. 0.340(8.64) Mechanical Data 1.0(25.4) MIN. -Case: Molded plastic. -Epoxy: UL 94V-0 rate flame retardant -Lead: Solderable per MIL-STD-202, method 208 guranteed. Dimensions in inches and (millimeter) -Polarity: Color band denotes cathode end except Bipolar. -Mounting position: Any Maximum Ratings and Electrical Characteristics Rating at 25°C ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive loaded. For capacitive load, derated current by 20%. Symbol Value Unit Peak power dissipation with a 10/1000μs waveform (Note 1) PPP 5000 W Peak pulse current with a 10/1000μs waveform (Note 1) IPP See Next Table A Power dissipation on infinite heatsink at TL=75°C PD 8.0 W Peak forward surge current, 8.3ms single half sine-wave unidirectional only (Note 2) IFSM 500 A Maximum instantaneous forward voltage at 100A for uni-directional devices only (Note 3) VF 3.5 / 5.0 V Operating junction and storage temperature range TJ, TSTG -55 to +150 °C Parameter NTOES: (1) Non-repetitive current pulse, per fig.5 and derated above TA=25°C per fig.1 (2) Measured on 8.3 ms single half sine wave of equivalent square wave, duty cycle=4 pulses per minute maximum. (3) VF