ACGRAS1W-HF

SMD General Purpose Rectifiers ACGRAS1W-HF Reverse Voltage: 1600 Volts Forward Current: 1.0 Amp RoHS Device Halogen Free DO-214AC (SMA) Features - Glass passivation junction. - High current capability. 0.065 (1.65) 0.049 (1.25) - High surge current capability. 0.110 (2.79) 0.100 (2.54) - Low reverse current. - Comply with AEC-Q101 0.177 (4.50) 0.157 (3.99) Mechanical data - Case: DO-214AC / SMA, molded plastic. - Epoxy: UL flammability classification rate 94V-0. - Terminals: Lead free plating (Tin finish). Solderable per MIL-STD-202, Method 208. - Polarity: Indicated by cathode band. - Weight: 0.062 grams(approx.). 0.012 (0.305) 0.006 (0.152) 0.090 (2.29) 0.078 (1.98) 0.008(0.20) Max. 0.208 (5.28) 0.193 (4.90) 0.060 (1.52) 0.030 (0.76) Circuit diagram Dimensions in inches and (millimeter) Maximum Ratings (at TA=25°C unless otherwise noted) Symbol ACGRAS1W-HF Units Max. repetitive peak reverse voltage VRRM 1600 V Max. DC blocking voltage VDC 1600 V Max. RMS voltage VRMS 1120 V Peak forward surge current, 8.3ms single half sine-wave superimposed on rated load (JEDEC method) IFSM 30 A Max. average forward rectified current IF 1.0 A Max. instantaneous forward voltage IF=1.0A @ 25°C VF 1.2 V Max. DC reverse current at rated TA=25°C IR 5 DC blocking voltage IR 50 CJ 10 pF RθJC 70 °C/W TJ -55 to +150 °C TSTG -55 to +150 °C Parameter μA TA=100°C Typical junction capacitance (Note 1) Typical thermal resistance Operating temperature range Storage temperature range Notes: 1. Measured at 1.0MHZ and applied reverse voltage of 4.0V DC. Company reserves the right to improve product design , functions and reliability without notice. REV: A Page 1 AQW-JG009 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Rating and Characteristic Curves (ACGRAS1W-HF) Fig.1 - Typical Forward Current Derating Curve Fig.2 - Typical Forward Characteristics 100 Instantaneous Forward Current, (A) Average Forward Current, (A) 2.0 1.5 1.0 0.5 25 50 75 100 125 150 0.1 0.7 0.8 0.9 1.0 1.1 1.2 Case Temperature, (°C) Forward Voltage, (V) Fig.3 - Maximum Non-repetitive Forward Surge Current Fig.4 - Typical Reverse Characteristics 50 100 Reverse Leakage Current, (μA) TJ=25°C 8.3ms single half sine wave, JEDEC method Peak Forward Surge Current, (A) 1.0 0.01 0.6 0 0 10 40 30 20 10 0 10 1 100 Number of Cycles at 60Hz 10 100°C 1.0 0.1 0.01 20 25°C 40 60 80 100 Percent of Rated Peak Reverse Voltage, (%) Fig.5 - Typical Junction Capacitance Junction Capacitance, (pF) 50 40 30 20 10 0 0.1 1 10 100 Reverse Voltage, (V) Company reserves the right to improve product design , functions and reliability without notice. REV: A Page 2 AQW-JG009 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Reel Taping Specification d P0 P1 E Index hole F B P W C A 12 o 0 D2 D1 D W1 Trailer ....... ....... End Device ....... ....... Leader ....... ....... ....... ....... 160mm (min) Start 400mm (min) Direction of Feed DO-214AC (SMA) DO-214AC (SMA) SYMBOL A B C d D D1 D2 (mm) 2.90 MAX. 5.90 MAX. 2.66 MAX. 1.50 ± 0.10 330 ± 2.00 50 MIN. 13.50 ± 1.00 (inch) 0.114 MAX. 0.232 MAX. 0.105 MAX. 0.059 ± 0.004 13.00 ± 0.079 1.969 MIN. 0.531± 0.039 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.05 12.00 ± 0.30 18.40 MAX. (inch) 0.069 ± 0.004 0.217 ± 0.002 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.002 0.472 ± 0.012 0.724 MAX. Company reserves the right to improve product design , functions and reliability without notice. REV: A Page 3 AQW-JG009 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Marking Code Part Number Marking code ACGRAS1W-HF S1W XXX XXX = Product type marking code Suggested PAD Layout DO-214AC (SMA) E (mm) (inch) D A 1.70 0.067 C B 2.50 0.098 C 1.50 0.059 D 4.00 0.157 E 6.50 0.256 SIZE A B Note: 1.The pad layout is for reference purposes only. Standard Packaging REEL PACK Case Type DO-214AC (SMA) REEL Reel Size ( pcs ) (inch) 5,000 13 Company reserves the right to improve product design , functions and reliability without notice. REV: A Page 4 AQW-JG009 Comchip Technology CO., LTD.