ACGRAT105-HF

SMD General Purpose Rectifiers ACGRAT101-HF Thru. ACGRAT105-HF Glass Passivated Type Reverse Voltage: 200 to 1000 Volts Forward Current: 1.0 Amp RoHS Device Halogen Free 2010 Features 0.181(4.60) 0.173(4.40) - Glass passivated cavity-free junction. - Lead less chip form, no lead damage. x0.020(x0.50) 0.091(2.30) 0.083(2.10) - Low forward voltage drop. - Plastic package has UL 94V-0. - Comply with AEC-Q101 0.045(1.15) 0.030(0.75) 0.045(1.15) 0.030(0.75) 0.046(1.16) 0.034(0.86) Mechanical data - Case: Packed with FRP substrate and epoxy underfilled. - Terminals: Pure Tin plated (Lead-Free),solderable per MIL-STD-750, method 2026. Dimensions in inches and (millimeter) Circuit Diagram - Polarity: Cathode Band, Laser marking. - Weight: 0.02 grams(approx). Absolute Maximum Ratings (at Ta=25°C unless otherwise noted) Symbol ACGRAT 101-HF ACGRAT 102-HF ACGRAT 103-HF ACGRAT 104-HF ACGRAT 105-HF Units Repetitive peak reverse voltage VRRM 200 400 600 800 1000 V Peak forward surge current, 8.3ms single half sine-wave superimposed on rate load (JEDEC method) IFSM 30 A Average forward current IF(AV) 1.0 A TJ -65 to +175 °C TSTG -65 to +175 °C Parameter Operating junction temperature Storage temperature Electrical Characteristics (at TA=25°C unless otherwise noted) Parameter Conditions Symbol MIN. TYP. MAX. Unit Forward voltage IF =1.0A VF - 0.95 1 V Repetitive peak reverse current VR =Max. VRRM, TA=25°C IRRM - 0.10 5 uA Junction capacitance VR=4V, f=1.0MHZ CJ - 8 - pF Junction to ambient (Note) RθJA - 65 - Junction to lead (Note) RθJL - 15 - Thermal Resistance °C/W Notes: Thermal resistance from junction to ambient and from junction to lead P.C.B. monuted on 0.2×0.2”(5.0*5.0mm) copper pad areas. Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 1 AQW-JG001 Comchip Technology CO., LTD. SMD General Purpose Rectifiers RATING AND CHARACTERISTIC CURVES (ACGRAT101-HF thru. ACGRAT105-HF) FIG.1 - FORWARD CURRENT DERATING CURVE FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 30 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD RECTIFIED CURRENT, (A) 1.50 1.00 0.75 0.50 0.25 60Hz RESISTIVE OR INDUCTIVE LOAD 25 20 15 10 0 0 0 25 50 75 100 125 150 1 175 FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE LEAKAGE CURRENT, (uA) IINSTANTANEOUS FORWARD CURRENT, (A) 100 NUMBER OF CYCLES AT 60Hz 10.00 1.00 0.10 0.01 0.4 10 LEAD TEMPERATURE, (°C) 0.6 0.8 1.0 1.2 1.4 10 1.0 0.10 0.01 20 1.6 INSTANTANEOUS FORWARD VOLTAGE, (V) 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG.5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (pF) 200 100 10 1 0.1 1.0 10 100 REVERSE VOLTAGE, (V) Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 2 AQW-JG001 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Reel Taping Specification d P0 P1 E Index hole F W B P C A 12 o 0 D2 D1 D W1 Trailer ....... ....... End Device ....... ....... Leader ....... ....... ....... ....... 160mm (min) Start 400mm (min) Direction of Feed 2010 2010 SYMBOL A B C d D D1 D2 (mm) 4.75 ± 0.10 2.45 ± 0.10 1.30± 0.10 1.50 ± 0.10 178.00 ± 2.00 50.00 MIN. 13.00 ± 0.50 (inch) 0.187 ± 0.004 0.096 ± 0.004 0.051 ± 0.004 0.059 ± 0.004 7.008 ± 0.079 1.969 MIN. 0.512 ± 0.020 SYMBOL E F P P0 P1 W W1 (mm) 1.75 ± 0.10 5.50 ± 0.05 4.00 ± 0.10 4.00 ± 0.10 2.00 ± 0.10 12.00 ± 0.30 18.70 MAX. (inch) 0.069 ± 0.004 0.217 ± 0.002 0.157 ± 0.004 0.157 ± 0.004 0.079 ± 0.004 0.472 ± 0.012 0.736 MAX. Company reserves the right to improve product design , functions and reliability without notice. REV:B Page 3 AQW-JG001 Comchip Technology CO., LTD. SMD General Purpose Rectifiers Marking Code Part Number Marking Code ACGRAT101-HF 10D ACGRAT102-HF 10G ACGRAT103-HF 10J ACGRAT104-HF 10K ACGRAT105-HF 10M GC .XXX. XXX = Product type marking code Suggested PAD Layout 2010 SIZE (mm) (inch) A 1.47MIN. 0.058MIN. B 1.27MIN. 0.050MIN. C 2.60MAX. 0.102MAX. D 5.14REF. 0.202 REF. C A B D Standard Packaging REEL PACK Case Type 2010 REEL Reel Size ( pcs ) (inch) 3,000 7 Company reserves the right to improve product design , functions and reliability without notice. REV:B AQW-JG001 Page 4 Comchip Technology CO., LTD.